ATLP Exhaust...revisiting CL again
#4
Whats up with RDX owners?
iTrader: (9)
Is that for a full exhaust or an axle back? If its the latter, thats a lot of $$$.
What size is the piping?
What size is the piping?
#5
Full 2.5" cat-back, with dual mufflers.
eneffex, you know this sort of post really belittles things a bit, don't you think? You can want a Tanabe more but this isn't a Tanabe post. Its an ATLP one, which my pretty much all 3g and 4g TL members is in an entirely different league.
eneffex, you know this sort of post really belittles things a bit, don't you think? You can want a Tanabe more but this isn't a Tanabe post. Its an ATLP one, which my pretty much all 3g and 4g TL members is in an entirely different league.
#6
Whats up with RDX owners?
iTrader: (9)
$1000 isnt bad for a cat back, assuming the SS quality and fitment is top notch.
What tips do you plan on using for them though?
What tips do you plan on using for them though?
#7
Senior Moderator
Trending Topics
#9
Senior Moderator
#10
Whats up with RDX owners?
iTrader: (9)
#11
Full 2.5" cat-back, with dual mufflers.
eneffex, you know this sort of post really belittles things a bit, don't you think? You can want a Tanabe more but this isn't a Tanabe post. Its an ATLP one, which my pretty much all 3g and 4g TL members is in an entirely different league.
eneffex, you know this sort of post really belittles things a bit, don't you think? You can want a Tanabe more but this isn't a Tanabe post. Its an ATLP one, which my pretty much all 3g and 4g TL members is in an entirely different league.
#12
Whats up with RDX owners?
iTrader: (9)
Hes not saying 3g and 4g owners are in a different league, but that the ATLP exhaust is in a different league compared to Tanabe - which I agree with.
#13
#15
Whats up with RDX owners?
iTrader: (9)
Curious about noise as well.
#17
#23
The comptech axlebacks, tanabe etc are 2" piping after the split, whereas the ATLP is 2.25". Not sure you would want that setup unless your mufflers piping is 2.25" also.
#24
Ultra Negro
iTrader: (1)
Join Date: Aug 2007
Location: South Holland, IL
Age: 42
Posts: 1,178
Likes: 0
Received 35 Likes
on
28 Posts
The president has "some" power but he is not all powerful, I blame rich people.
#25
Whats up with RDX owners?
iTrader: (9)
It will be better when politicians in general stop being so obsessed with stealing from their own country and only looking at the short term goal, same with the CEO's who take all the money and fuck up all these companies because they outsource to china or other countries because they only look at short term.
The president has "some" power but he is not all powerful, I blame rich people.
The president has "some" power but he is not all powerful, I blame rich people.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#29
I swore off aftermarket exhausts after going through five of on my now gone Integra, just trying to get a sound I could live with...
But I met the fella w/ the RJ sponsored gray TL while filling gas. He was running the ATLP. Fitment looked good.
I asked the guy to punch it for me when he left and the sound was nice - pretty deep, not too loud and definitely not raspy. I wouldn't get it primarily for the HP increase, but maybe for the exhaust note.
But I met the fella w/ the RJ sponsored gray TL while filling gas. He was running the ATLP. Fitment looked good.
I asked the guy to punch it for me when he left and the sound was nice - pretty deep, not too loud and definitely not raspy. I wouldn't get it primarily for the HP increase, but maybe for the exhaust note.
#32
Moderator Alumnus
If I still had my CL I would buy this. Granted I remember my CL being crazy loud with full custom exhaust. Went from straight pipes to mag quad muffs and the sob was still loud. I'm loving the sound of the setup phee.
#33
Well, we are getting the 2g TL systems tomorrow. I am expecting to have a left over one. Then all I need is a test CL to bring in and have the kit fitted to, post pics, etc. If you guys like it then we can do the GB.
#34
Suzuka Master
iTrader: (3)
The thing is it is not going to bolt up to OEM mufflers, or any other aftermarket mufflers. We cn make just B-pipes but there is going to be some fab needed no matter what.
High ranking politicians and corporate executives are on the same side. It isn't these guys versus those guys...it is all of US versus all of THEM.
It does look nice, but ATLP phased them out a while back. I cannot say why really. I don't see why we could not bring it back if people wanted it.
Well, we are getting the 2g TL systems tomorrow. I am expecting to have a left over one. Then all I need is a test CL to bring in and have the kit fitted to, post pics, etc. If you guys like it then we can do the GB.
High ranking politicians and corporate executives are on the same side. It isn't these guys versus those guys...it is all of US versus all of THEM.
It does look nice, but ATLP phased them out a while back. I cannot say why really. I don't see why we could not bring it back if people wanted it.
Well, we are getting the 2g TL systems tomorrow. I am expecting to have a left over one. Then all I need is a test CL to bring in and have the kit fitted to, post pics, etc. If you guys like it then we can do the GB.
#37
G.uns O.n D.emand
iTrader: (1)
Join Date: Aug 2008
Location: STATEN ISLAND, N.Y.C.
Age: 44
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
this is off topic but what happened to the 8th gen accord v6 atlp exhaust. it was suppossed to be made for our cars and then ??? does anyone know if i can use cl or tl exhaust or axlebacks on the 8th gen accord v6?
#38
Well, Being that the 8th gen thing came up before I took over ATLP, and there was a relatively low amount of interest in the system (I don't visit 8th gen forums much....or these forums much to be honest) we just kinda put it on a 'side' burner. I believe there are people that want this system for sure. But the squeaky wheels, and the wheels in front of me, get the grease.
#39
Three Wheelin'
iTrader: (7)
Quote:
Originally Posted by MrHeeltoe
Here is the tip although we have now moved to smooth inside tips rather than the perforated ones.
GAHH!!! Why did you do that? I thought the perforated inner tip was a pretty cool looking feature.
Originally Posted by MrHeeltoe
Here is the tip although we have now moved to smooth inside tips rather than the perforated ones.
GAHH!!! Why did you do that? I thought the perforated inner tip was a pretty cool looking feature.
![Yum](https://acurazine.com/forums/images/smilies/yum.gif)
#40
I already addressed how this is different than the roof spoiler thing. It should not be an issue. The problem with the roof spoiler was no access to a car that we could keep for a week. This time we rely on people to make deposits. If this does not go through, it will be for different reasons than for roof spoiler.