Anyone for a Blown //M5?
Thread Starter
....................
Joined: Jan 2001
Posts: 5,063
Likes: 0
From: united states
Anyone for a Blown //M5?
Trending Topics
teh Senior Instigator
Joined: Sep 2000
Posts: 44,094
Likes: 980
From: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
Originally posted by Zapata
RMS Headers Headers 1499.99.........
For all the whinning and complaing about comptech headers.
RMS Headers Headers 1499.99.........
For all the whinning and complaing about comptech headers.
viper guys pay close to 3K for like 5 HP
Safety Car
Joined: Aug 2002
Posts: 4,910
Likes: 1
From: So Cal
Pictures
The second picture (modified runners for the individual throttle-bodies) are for the NA application. It puts like 470hp out of the M5 motor.
The 'blown' M5 puts close to 530hp in the Stage III application. I saw one at the LA Auto Show on a Z8 (same engine). The Stage I is like 470 or something like that. The stage III is around 9psi and includes a second set of injectors and a thicker head-gasket to reduce compression a tad bit. Plus it has a lot more timing control and stuff to prevent detonation etc. Those motors are likes ours with hefty compression from the factory!
The Stage I kits for the M3 and the M5 are around 7psi and don't do much extra other than more fuel.
The 'blown' M5 puts close to 530hp in the Stage III application. I saw one at the LA Auto Show on a Z8 (same engine). The Stage I is like 470 or something like that. The stage III is around 9psi and includes a second set of injectors and a thicker head-gasket to reduce compression a tad bit. Plus it has a lot more timing control and stuff to prevent detonation etc. Those motors are likes ours with hefty compression from the factory!
The Stage I kits for the M3 and the M5 are around 7psi and don't do much extra other than more fuel.
teh Senior Instigator
Joined: Sep 2000
Posts: 44,094
Likes: 980
From: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
All_motor, that 2nd one is for the blown M5, that silver thing in the middle is the aftercooler. I sat and talked to the guy at the RMS stand for about 30 minutes at the auto show.
They also lower the Redline of the cars about 400 RPM to prevent detonation.
They also lower the Redline of the cars about 400 RPM to prevent detonation.
teh Senior Instigator
Joined: Sep 2000
Posts: 44,094
Likes: 980
From: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
Originally posted by allmotor_2000
What? You are kidding me. I didn't see that mod - looked more like a plenum. That's pretty sick if you ask me!
Thanks for the info!
What? You are kidding me. I didn't see that mod - looked more like a plenum. That's pretty sick if you ask me!
Thanks for the info!
exactly why I said it was the sickest picture I had seen
Thread
Thread Starter
Forum
Replies
Last Post
ripit
4G TL Audio, Bluetooth, Electronics & Navigation
1
Sep 26, 2015 06:19 PM
polish_pat
3G TL Audio, Bluetooth, Electronics & Navigation
1
Sep 25, 2015 12:24 PM