Hello,

Here at Nexus Industry, we are proud to announce the arrival of our latest container of Alphawerks Racing Development headers, exhausts, and turbo manifolds. We have received the Acura CL/TL stainless-steel HEADER and Acura CL/TL stainless-steel CAT-BACK EXHAUST.

These products have gone through our R+D department to ensure: perfect seal, perfect fitment, and perfect power. These headers and cat-back exhaust fit all Acura TL and all Acura CL models.

Below are some specs on the products and the dyno runs on both an Acura CL and an Accord V6 that has the same engine.

The Acura CL dyno from www.acura-cl.com member -- bigguyonbike.

Dynos are baseline v. Alphawerks header+CAI+Pulleys. If you want to see the actual post go to https://acurazine.com/forums/showthr...ght=alpha+dyno

DYNO SPECS:
1. +30bhp SAE corrected
2. +16lbs/tq. SAE corrected
3. Both runs done w/ 19 wheels
4. Both runs done with engine at operating temp to simulate normal driving conditions
5. Car has 92,000+ miles
6. 3rd gear pulls



Accord V6 Dyno of 100% stock V6 (same engine as Acura). The only parts added here were the Alphawerks Header and the Alphawerks cat-back exhaust.

DYNO SPECS:
1. +34hp SAE Corrected
2. +26lbs/tq SAE Corrected
3. Baseline 100% Stock
4. Dynojet Dyno
5. Average temp: 95 degrees



HEADER SPECS:
Alphawerks Racing Development 3-1 Headers
T-304 Stainless-Steel
Full Polish
Equal Length Runners
Heavy Duty 3/8” (.375 inch) Thick Flanges
02 Sensor Mount to USDM Stock Position
CNC Machined Flanges
Machine TIG Welding
1-Year Warranty
Includes Gaskets





BELOW IS PIC OF O2 SENSOR FITMENT ON HEADER




DUAL-EXHAUST SPECS
Alphawerks Racing Development Cat-Back Exhaust
Dual High-Flow Canister
T-304 Stainless-Steel
Full Polish
CNC Machined Flanges
Machine TIG Welding
1-Year Warranty
Includes Gaskets

ALPHAWERKS STAMP OF AUTHENTICITY ON EVERY EXHAUST





PERFECT HANGER FITMENT





ACURA-CL THREAD ON THE HEADER'S QUALITY
https://acurazine.com/forums/showthread.php?t=131913

ACURA-CL THREAD ON THE HEADER'S INSTALL
https://acurazine.com/forums/showthread.php?t=92749


If anyone has any questions please PM me or post your question here. I will be available practically 7 days a week. My job is to ensure that we go above and beyond any other company in addressing your questions and customer service needs beginning with this thread that is in response to inquires about our product.

Congrats to everyone here at acura-cl.com for their true enthusiast spirit and good luck with your mods.

Best regards,

Victor D.
www.nexusindustry.com
Exclusive North American Distributor of Alphawerks Racing Development

 

awaiting the lock on this, but I will ask a question....

When, if ever, will there be a version of these headers for people with the 6speed version of the CLS?

 

wheres the prices? and no free advertising...

:ibtehjonesi:

 

You need to contact Smitty if you wish to advertise your product on the forum.

They look good though... Good luck.

 

Prices are on our site. I am here to reply an to previous posts on the products and to answer any R+D questions. I do not work in the sales department.

Again I am posting all the possible information on the product I have and putting links to all the other mentions of the product on your forum for everyones convenience.

Lastly, I am not here to sell only inform and answer any questions and am not looking for free advertising only here to repond to something members on this forum have an interest in. That is why my sig has no pics or headers or logos or banners, just my name and site.

Thank you for the opportunity and again congradulations on a great forum and community of real enthusiasts.

Best,
Victor D.
www.nexusindustry.com

 

Those are some HUGE looking coffee cans

 

How do I PM on this forum...and who is smitty and how do I contact him to make sure that I am operating w/in the bounds of the forum because again I am replying to others posts.

 

Top right... click on Quick Links... Private Messages

send one to 'Smitty'

 

so we now have comptech, obx, megan, stone, and aw. they are all the same design, only thing to worry about now is fitment and possibly quality down the road. i hope that your company has equal or better quality and fitment than comptechs, cuz at a few hundred short of a comptech a set, these are the second most expensive alternative to date.
i dont think smitty even needs to lock this thread, the price is going to ensure that these wont sell. oh and the exhaust which imo doesnt look great isnt exactly a bargain at a price so close to comptechs!

 

 

No 6 speed version = no care

WTF is it so difficult to put a godamn bend in a pipe??

 

Give them a chance.

It even took Comptech time to make a six speed version.

 

Buyer beware!!!
I know this is an old thread but I believe it disserves a warning to potential
buyers.

https://acurazine.com/forums/showthr...0&page=1&pp=25
https://acurazine.com/forums/showthread.php?t=127902
https://acurazine.com/forums/showthr...61#post1346061

 

Anyone that can read and visits this site even minimally knows about alphaworks and their products. I'd venture to say that you won't even pick up one sale from this forum after your previous performance with those with defective headers. Maybe you should give an update when you fixed your customer service problem.
(I just realized how old this thread is!!!!!!!!)

 

you're a year late my friend.

 

Sure, We all know how old this thread is. If you read my posting clearly you will notice that all I said was, "Buyer beware!!!I know this is an old thread but I believe it disserves a warning to potential buyers". You will also notice that the word "defect" was not even mentioned in this old thread. Now that the word “defect” has been mentioned, my job is done.

 

i'd consider the entire exhaust system if the mufflers dint look so ricey.

 

Old news and a multitude of threads on this.