I was pulling out of a parking spot that had a very high curb on one side. When I was cutting the wheel I did some real damage to the corner of the bumper. It was originaly pushed in and I was able to push it out but there is still a scratch on the paint along the bottom and there is a deep gash on the bottom lip of the fog light hole.

What do you guys suggest replace/repaint bumper of compound/sand/repaint bumper

 

do you have OEM lip on the front or is it stock? if its stock, get a OEM lip, would it cover it?

 

we can tell ya if it'll cover it up

 

agree

 

Thanks for the replies and I will get some pictures up soon

 

http://pg.photos.yahoo.com/ph/abbachia/my_photos

 

I suggest you have it done by a professional :P

 

get a oem lip it will cover it im pretty sure

 

 

Anybody have pics of a side view of a TSX with OEM lip ond no side body moldings?

 

[image]http://pic7.picturetrail.com/VOL183/2045578/3963669/65101269.jpg[\image]
[image]]http://us.f2.yahoofs.com/users/4115faa8zecb5c18a/d9cf/__sr_/b321.jpg?phStjNBBofALMTyg[\image]

 

[IMG]http://us.f2.yahoofs.com/users/4115faa8zecb5c18a/d9cf/__sr_/b321.jpg?phStjNBBofALMTyg[\IMG]
[IMG]http://pic7.picturetrail.com/VOL183/2045578/3963669/65101269.jpg[\IMG}

 

side body moldings? no tsx have side body moldings get an oem lip it will cover it and will look good

 

I assume you mean side skirts, not side moldings

coujac's ride

 

that doesnt even look bad without the rest of the kit

 

I am going to take it to a local body shop for an estimate on the bumber fix and then decide which way I am going to go on this.

You guys have been great!