s001y

gauge pod? Currently just using the independent stands but I also have a DIY 3 gauge pod in the making based on a Jap specially tilted type for the Euro R.... But likely I will not use this and leave the gauges as they are but reorganised them again later when a new part arrives....

H8TKTZ

Definitely a hott car, good luck w/it!

s001y

Seriously, have u heard of work? I also get involved and move many DIY projects for fun...helps to save cost and does the job...

s001y

Look, on weekdays, I am overseas. Only spent weekends with my car. I have much going on and I really need to find time for some pics. The Mugen full kit on red is really one horny look...

s001y

Yo,

keep in mind that it only fits for 03 to 05 pre-facelift models. Should fit for TSX . But the FL models, unless they have 3 holes inverted (for the strip on the bonnet) is available, then possibly yes.

s001y

Just sharing and just a hobby on my car to keep my sanity.....

inkedup

Yeah, I called EGR USA yesterday to see if they could get me the part even though its only listed in the Australian catalog but they said no... oh well.

ml2spin

Stop teasing people and post some pixs of your new bodykit lah!!!

TSeXaholic

are those the euro r rims?

Louis V

yeah, too much foreplay downplays the sex.....

s001y

Just did off my last project and hopefully should get sometime for photos now....but based overseas and just time is my enemy la...

For u, just come over and view first hand la....How's work? busy busy must be....

s001y

waaaaaa, Louis V, just come over and we could have some orgy shots of our cars.... and anyway, your car is also one hot hot mod and this stays here in this forum, ok?

s001y

The front pics show the Euro R rims and I have moved on back to my old sparco racing rims...

Louis V

hahahaha... yeah bro... still have not had the chance to visit Clover Garage yet. An orgy sounds nice... but my car very stock looking bro...

CooLeh

Nevermind those mods...seen before, heh heh. Show them the 'Angels'.....sure they'll go nutz!

EuRTSX

Car Orgies..

PsYcHoSPIKE

wow cc ,nice to see yur ride here ..so diff as of nw ..u r the DIY king ..

s001y

14 Aug 07 Update in orange

Just an update since I have been based overseas, have very little time to modify further and just some recent things done. Apologies.


Modifications

Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. Mugen '03 Front Bumper with DIY stock fog lights integrated
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
41. Mugen front high speed tilt license plate
42. Flat wipers
48. ProDrive GC014 Rims - British Black 225/45/17 8JJ/ offset 43
Tyres : Bridgestone RE 001 225/45/17 8JJ
Mugen side skirts '03 look
Mugen '03 lower rear lip with british black strip between exhaust

Lights



53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. LED white bulbs reverse lights


Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
DIY lower rear wheelbase bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3


Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield Total cover

9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. NGK K20 racing plugs
14. CUSCO upper front strut bar
15. 40000IU Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Exhaust header.
60. Customised battery sockets and flat acrlic holder.


Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor [/B] + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Defi amber meters Oil / water temp / oil pressure
Autometers airfuel / vaccum / volt / front manifold temp on 2 level stock dashboard panel.

Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
DIY Rear seat reinforced aluminium flexing bar
DIY rear boot aluminium bar

s001y

21 Aug 07 Update in orange

Just an update since I have been based overseas, have very little time to modify further and just some recent things done. Apologies.


Modifications

Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. Mugen '03 Front Bumper with DIY stock fog lights integrated
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
41. Mugen front high speed tilt license plate
42. Flat wipers
48. ProDrive GC014 Rims - British Black 225/45/17 8JJ/ offset 43
Tyres : Bridgestone RE 001 225/45/17 8JJ
Mugen side skirts '03 look
Mugen '03 lower rear lip with british black strip between exhaust

Lights



53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. LED white bulbs reverse lights
57. DIY Open door red LED throw light underneath door

Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
DIY lower rear wheelbase bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3


Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield Total cover

9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. NGK K20 racing plugs
14. Upper Front strut bar with DIY Brake drum stopper15. 40000IU Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Exhaust header.
60. Customised battery sockets and flat acrlic holder.


Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor [/B] + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Defi amber meters Oil / water temp / oil pressure
Autometers airfuel / vaccum / volt / front manifold temp on 2 level stock dashboard panel.

Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
DIY Rear seat reinforced aluminium flexing bar
DIY rear boot aluminium bar[/QUOTE]

s001y

20 Sept 07 Update in orange

Just an update since I have been based overseas, have very little time to modify further and just some recent things done. Apologies.


Modifications

Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. Mugen '03 Front Bumper with DIY stock fog lights integrated
4. Mugen side skirts '03 look
5. Mugen '03 lower rear lip with british black strip between exhaust
6. Mugen rear spoiler
7. Mugen front high speed tilt license plate
8. Mugen petrol cover
9. Ferrado front brake pads high temp 500
10. Ferrado rear brake pads high temp 500
11. Goodrich PTFE Teflon brake hoses
12. Tomei adjustable Coilovers & dampers
13. EGR bonnet protector (coloured red)
14. EGR Front lens covers
15. Flat wipers
16. Rims : ProDrive GC014 - British Black 225/45/17 8JJ/ offset 43
17. Tyres : Bridgestone RE 001 225/45/17 8JJ
18. 4 point Reverse sensors with digital distance readout

Lights
20. H1 high light 100W
21. Yellow bulbs rear side lights
22. Red bulbs rear brake lights
23. LED white bulbs reverse lights
24. DIY Open door red LED throw light underneath door
25. White LED door courtesy lights (front)

Undercarriage
30. DIY lower front strut bar
31. DIY lower rear reinforced bar
32. DIY lower rear wheelbase bar
33. DIY 4 pt improved under braced bar
34. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3


Engine Bay & Performance
40. DIY Open pod air intake system with Heat Shield Total cover
41. DIY Oil Catch tank TWE
42. DIY ULTRA grounding cables + extra grounding points
43. NGK K20 racing plugs
44. Front strut bar with DIY Brake drum stopper
45. 40000IU Voltage stabilizer
46. Mugen engine oil cap
47. Magnetised oil filter
48. SPC Rear Camber Kit
49. Neuspeed short shift
50. Exhaust header.
51. Customised battery sockets and flat acrlic holder.


Interior
60. DIY Clutch by-pass switch
61. Some customised logos
62. PIVOT Audio stabilizer
63. PIVOT 3 point Shift light
64. APEXI Rev Speed meter with sound buzzer
65. Niken Pitch & roll meter
66. Niken Altitude meter
67. Defi amber meters Oil / water temp / oil pressure
68. Autometers airfuel / vaccum / volt / front manifold temp on 2 level stock dashboard panel.
69. Mitsubishi motorized rear shade
70. Front - Blue strobe light with switch
71. Rear – Blue strobe light with switch
72. Mugen leather gear boot
73. Leather red handbrake cover
74. Pioneer ICE with 12 CD changer, MP3, with integrated stockhead unit as aux
75. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
76. S2000 gear knob
77. Accord scuff plates
78. Add-on LED spot lights throw for leg room
79. Mugen door lock knobs

Boot
80. Rear side luggage netting
81. In trunk side netting
82. Blue neon boot light to light up the rear.
83. DIY Rear seat reinforced aluminium flexing bar
84. DIY rear boot aluminium bar

kaliraver69

godfather2

^ true

EuRTSX

pictures man pictures!

s001y

Hie there,

my apologies. Over the last half a year, i have been travelling like 80% of my time. Did not get a chance to polish for a phot taking as so much to do when I get back home. I see what I can do at end of this year when I think I have a little more time....

s001y

So sorry, and managed to get some pics done and I travel tomorrow, so found some time and here is some pics and feel free to comment or ask where each mod goes....

s001y

s001y

Some DIY stuff, nothing too serious and DIY stuff is just a hobby of mine and see what u can spot here........

s001y

see if you can spot the mods......just some special DIY touches....

Louis V

Finally, some pics.......nice ride! Saw it real life few days back.... shd check out the interior meters.....

ole_dawg

Sweet! Loving the fogs! Would like to see some pics of your DIY bars.

Also, what header are you running?

afici0nad0

i like the stock exterior more than what you have now.

nevertheless, your car is amazing.

s001y

The Mugen 03 bumper does not cater for fog lights and I had to DIY it in and as far as I know, probably the first to do this...at least here at home....

I have some DIY bars but I am now in a airport lounge and will see if I can do this during my trip...

The header is a hush hush topic.....

s001y

Thanks. Just wanted to share on what can be done on the car. I have some more DIY work and currently, I travel every week and you know this zaps energy and real time...... Any mods to your ride yet?

s001y

I also saw your black ride and it was a quick glance and real nice with the J's bonnet ....whoppeeeee!

I have a pic of the meters and this could take down the house here....did you see my meters layout real life? I had this video of someone peeping in.....

godfather2

amazing ride!! wheels look great too

ole_dawg

I understand ... I am in the market for a header for my car but Toda & Mugen are a little too pricey. Looking for other options ...

s001y

Thanks and they are Prodrive GC 014i british black...

s001y

Well, Toda full headers give more flow and thus noise, but high end is really good. Mugen ones are also good is what I heard. There is this Spoon for the top piece and using back the stock lower pipes.

We also have some customised headers from taiwan etc. Can't remember the brand. Most headers are expensive but this one from taiwan seems reasonable.

I don't know this taiwan headers performance at all. Heard there is one that fits CL9 or the 2.4 model

s001y

One of the lower 4 pt brace. Becareful about the cat covers as aftermarket exhaust could hinder a "knocking". Thus, requires some DIY to correct some problems with branded ones.




another one for the undercarriage rear, and this one really does a good job. DIY aluminium and required some tricky bend.




This one for the rear seat and DIY brace...



Think it is enough to get an idea and 2 more but could not get photo shots..
Sorry.

ole_dawg

Nice job. You really are the DIY King!

I heard about the Spoon header but didnt realise the lower half of the stock header was to be reused. Was wondering how come it was much cheaper than the others. Maybe I just gotta save for the Toda ....

Thanks man.