JDM Red Euro R
#121
Originally Posted by Iakonafuji
That's a beautiful car you have there...but I'm quite new to the JDM scene of the TSX/Accord...do you think you could enlighten me as to what the difference is between the CL7 and the CL9?
CL7
- JDM Euro R
K20A2? 2.0 litre engine, 220 hp, 206 NM torque, 6SP manual, Recaro seats, FWD, 215R17/7. 5LUGS, PCD 114.3. 0-100 km/h = 7s.
- JDM Accord
K20A3 (I think) 165hp, tritronic 5SP
CL9
- JDM Accord
K24 200hp, 5SP tritronic. 0-100 around 8s.
Outside Japan, they made the K24 as the "euro" model i.e not the "euro R" but more or less like the "euro R".....
#122
Originally Posted by drigo
yeah...can we get some updated pics?
I am still working through my next set of mods on the battery terminals and layouts. I will try to get some pics on on exterior . many apologies as very very busy..
#123
Originally Posted by s001y
No offence dude, but what do you mean by RonJon wheels?
Think this guy is sh#t stirring people with JDM conversion but US wheels...
#124
Originally Posted by CCColtsicehockey
can i get a picture of the accord scuff plate
This is the front for driver and passenger side. Rear ones, some self bending needed to fit the curves. Original set was meant for the CM5 or CM4 model. The front fits over the pastic scuffs in much bigger coverage and looks nice in chrome and the protruding Accord words.
#125
Originally Posted by CooLeh
RonJon are US made wheels so highly unlikely to be seen on a JDM Euro....
Think this guy is sh#t stirring people with JDM conversion but US wheels...
Think this guy is sh#t stirring people with JDM conversion but US wheels...
I thought so RonJon was rims. Anyway, my are Sparco and not american.....
#126
28 Sept Update so far......
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black
49. Toda exhaust header
50. DIY Lower front grill
51. Yellow H11 fog lights
52. DIY Rear lower 2 fins
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
57. Add-on LED spot lights mounted behind lower grill.
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black
49. Toda exhaust header
50. DIY Lower front grill
51. Yellow H11 fog lights
52. DIY Rear lower 2 fins
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
57. Add-on LED spot lights mounted behind lower grill.
#127
Cruisin'
Join Date: May 2004
Location: Germany
Age: 48
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
wow - nice car - unfortunately, one does not get the Euro-R in Germany. But my real question: Where from one gets this Hood Protector (bug shield) - can somebody help me?
Thank you
By
Carli
wow - nice car - unfortunately, one does not get the Euro-R in Germany. But my real question: Where from one gets this Hood Protector (bug shield) - can somebody help me?
Thank you
By
Carli
#128
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,603
Received 3,802 Likes
on
2,560 Posts
darn I was hoping the scuff plate was a metal skid plate under the engine. I really need to find a skid plate for under my car cause I keep it so low.
#129
Originally Posted by Carli
Hi,
wow - nice car - unfortunately, one does not get the Euro-R in Germany. But my real question: Where from one gets this Hood Protector (bug shield) - can somebody help me?
Thank you
By
Carli
wow - nice car - unfortunately, one does not get the Euro-R in Germany. But my real question: Where from one gets this Hood Protector (bug shield) - can somebody help me?
Thank you
By
Carli
Already message you details and maybe we can do a barter trade. Let me know as I am waiting for the next shipment to arrive and see if they have anymore.
cheers
#130
Originally Posted by CCColtsicehockey
darn I was hoping the scuff plate was a metal skid plate under the engine. I really need to find a skid plate for under my car cause I keep it so low.
In stock set up, there is no rubber plastic piece that covers up from the front axle backwards. The stock comes with a plastic piece till where the under pan of the engine oil pan is. The oil pan is quite low down and exposed, so a real easy problem to get a whack and cracks it.
So, what I have done, I customised a front lower arm aluminimum bar that locks into the 2 front arm bolts by making a customised brackets (as the bolts sit deep inside) and have the aluminimum stut bar (yes, it is the same aluminimum strut bar for the top) across and "protecting" any knocks to my bar first instead of the oil pan. The lower strut gets hit all the time but beats the hell of having a cracked oil pan.
If you want to make a customised metal plate for below the car (often used with WRXs and Evos), it can be done as long you can raise up the car and do some simply measurements of where you could mount. Just watch out for your headers and flanges and the cat. Problem is that it will be too low.
Hope this helps...
#131
19 Oct Update so far......
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
7a. DIY heat shield with Bumper air scoop (mugen design)
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. DIY 4 pt improved under braced bar
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black
49. Toda exhaust header
50. DIY Lower front grill
51. Yellow H11 fog lights
52. DIY Rear lower 2 fins
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
57. Add-on LED spot lights mounted behind lower grill.
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
7a. DIY heat shield with Bumper air scoop (mugen design)
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. DIY 4 pt improved under braced bar
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black
49. Toda exhaust header
50. DIY Lower front grill
51. Yellow H11 fog lights
52. DIY Rear lower 2 fins
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
57. Add-on LED spot lights mounted behind lower grill.
#132
20 Dec 06 Update so far......and i just rearrange it so it reads better...
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with fan intake & switch with CAI
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
Boot
37. Rear side luggage netting
47. In trunk side netting
Will try to get pic over this christmas period as apologies due to work and travels...
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with fan intake & switch with CAI
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
Boot
37. Rear side luggage netting
47. In trunk side netting
Will try to get pic over this christmas period as apologies due to work and travels...
#135
Originally Posted by CSpaR
I like the front air deflector. I just googled it and couldn't find anyone selling this. Where did you get yours?
Made by EGR in Australia. Comes in plastic acrylic but had it sprayed black. Then now I sprayed it red to body colour. My next pic will show this and makes the colour front another look.
The eye covers are also made by EGR. There is a black carbon trimming for the light covers but better stay with clear ones as they look better. Unless your car is black, else the carbon ones look strange with 2 holes for the lights to project out.
So get a set of both. They call it the TSX (Euro R) Euro Model in Aussie land....
#136
Originally Posted by stephen8512
pics of the mods to date please and the car itself as is atm
I agree it is my damn fault for no newer pics as I have been busy. End of the year is even worse for me but I will struggle with this. Pse give me more time.....
#137
Racer
Join Date: Jan 2005
Location: Colorado
Age: 55
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
wow, painted it red huh? That sounds nice. I have a silver TSX. Might get it and paint the inside or back what ever you call the part that doesnt face outward, the same silver color.
Cant wait to see a pic of it in your red color.
Cant wait to see a pic of it in your red color.
#140
Originally Posted by CSpaR
wow, painted it red huh? That sounds nice. I have a silver TSX. Might get it and paint the inside or back what ever you call the part that doesnt face outward, the same silver color.
Cant wait to see a pic of it in your red color.
Cant wait to see a pic of it in your red color.
The black was orginally such that painted in reverse, so acrlic on the top while the black paint below. Now the top is red and makes the car look a little fiercer i think..... Hang on, as heavey heavy rain the last 3 weeks and floods too. No sunshine to shoot a few shots....so sad. wet christmas too...
#142
27 Dec 06 Update in BOLD
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with fan intake & switch with CAI
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with fan intake & switch with CAI
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels
#143
04 Jan 07 Update in BOLD
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels[/QUOTE]
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels[/QUOTE]
#144
Originally Posted by s001y
09 Jan 07 Update in BOLD
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
61. 4 doors window visors (mugen design)
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
61. 4 doors window visors (mugen design)
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels
#146
Originally Posted by VegaTSX
Need more pics!
S001Y....think before u do ur next update to ur extensive list, better come armed with pictures or they'll be a riot here
No more TEASING
#147
Time to Climb
Originally Posted by s001y
04 Jan 07 Update in BOLD
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. DIY front scoop black netting.
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
50. DIY Lower front bumper grill
52. DIY Rear lower 2 fins
Lights
5. DIY fog light black netting
38. EGR front light covers
51. Yellow H11 fog lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
7a. DIY heat shield with Bumper air scoop (mugen design)
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
Will try to get pic over this christmas period as apologies due to work and travels
now that's dedication! how about some more pics to go along with that list?
#149
Dear all,
I am busy in my regional job as much as the Accord Club (loads of activities) and my family etc. It has also been raining for the past few weeks and the car gets dirty or timing out for a photo shot when I have some spare time.
Cooleh could vow for me as we see each other frequently. The weather is simply raining.
I agree with most that I simply need to get this done and between a next mod and some pics, guess I am in for the former first.....wahahahah!
I am busy in my regional job as much as the Accord Club (loads of activities) and my family etc. It has also been raining for the past few weeks and the car gets dirty or timing out for a photo shot when I have some spare time.
Cooleh could vow for me as we see each other frequently. The weather is simply raining.
I agree with most that I simply need to get this done and between a next mod and some pics, guess I am in for the former first.....wahahahah!
#151
Originally Posted by CSpaR
I think you've almost replaced every piece of the car except for the body panels! Shoot, just gave you a new idea for more mods!!!
Hehehe, not really, just some touches here n there. I am looking for some FRP panels if any. There is carbon bonnets but so far, I have resisted all aftermarket bodykits and CF bonnets. I have been thinking of it and simply waiting for the options surface....
I still have some more projects cooking...so....time is my enemy...
#153
Originally Posted by minkl81
still no new pictures?? oh come on~ i'll have to do this again
yea yea yea. It is entirely my fault. Car is dirty and no polish session available. Raining hard too. I have so many excuses for this long delay.
Keep whacking me here please. My fault!
Now I have to prepare the car for a track next week. About 15 of us will be at track day attack....running with evils and scoobies....integras and civics....
Sigh.....I am really busy...
#154
12 April 07 Update in BOLD
Unfortuantely since I last logged in was feb 07 and I am on an overseas assignments and stationed overseas on weekdays. However, only spent little weekend getting some more mods for the car. New additions are in orange....
No time for pics, very very sorry as so busy and can u imagine that I only drive the car on weekends now....
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. Mugen '03 Front Bumper with DIY stock fog lights integrated
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
Mugen side skirts '03 look
Mugen '03 lower rear lip with british black strip between exhaust
Lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
DIY lower rear wheelbase bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Defi amber meters Oil / water temp / oil pressure
Autometers airfuel / vaccum / volt / front manifold temp
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
DIY Rear seat reinforced aluminium flexing bar
DIY rear boot aluminium bar
Unfortuantely since I last logged in was feb 07 and I am on an overseas assignments and stationed overseas on weekdays. However, only spent little weekend getting some more mods for the car. New additions are in orange....
No time for pics, very very sorry as so busy and can u imagine that I only drive the car on weekends now....
Modifications
Exterior & Bodywork & Brakes
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
6. Mugen '03 Front Bumper with DIY stock fog lights integrated
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
29. Mugen petrol cover
35. 4 point Reverse sensors with digital distance readout
39. EGR bonnet protector (coloured red)
41. Mugen front high speed tilt license plate
42. Flat wipers
48. Sparco Racing Rims - British Black
Mugen side skirts '03 look
Mugen '03 lower rear lip with british black strip between exhaust
Lights
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights
Undercarriage
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
DIY lower rear wheelbase bar
13. DIY 4 pt improved under braced bar
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
Engine Bay & Performance
7. DIY Open pod air intake system with Heat Shield
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
28. Mugen engine oil cap
36. Magnetised oil filter
45. SPC Rear Camber Kit
46 Neuspeed short shift
49 Toda exhaust header.
60. Customised battery sockets and flat acrlic holder.
Interior
8. DIY Clutch by-pass switch
12. Some customised logos
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
30. Mugen leather gear boot
31. Leather red handbrake cover
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. Preforma 800 Watts amps + Capacitor + rear & front speakers + tweeters + boozoka base tube
43. S2000 gear knob
44. Accord scuff plates
57. Add-on LED spot lights throw for leg room
59. Mugen door locks
Defi amber meters Oil / water temp / oil pressure
Autometers airfuel / vaccum / volt / front manifold temp
Boot
37. Rear side luggage netting
47. In trunk side netting
58. Blue neon boot light to light up the rear.
DIY Rear seat reinforced aluminium flexing bar
DIY rear boot aluminium bar
#158
Where can I order the EGR hood protector from?
EDIT: nevermid, just found this post...
EDIT: nevermid, just found this post...
Originally Posted by CSpaR
I like the front air deflector. I just googled it and couldn't find anyone selling this. Where did you get yours?
Made by EGR in Australia. Comes in plastic acrylic but had it sprayed black. Then now I sprayed it red to body colour. My next pic will show this and makes the colour front another look.
The eye covers are also made by EGR. There is a black carbon trimming for the light covers but better stay with clear ones as they look better. Unless your car is black, else the carbon ones look strange with 2 holes for the lights to project out.
I like the front air deflector. I just googled it and couldn't find anyone selling this. Where did you get yours?
Made by EGR in Australia. Comes in plastic acrylic but had it sprayed black. Then now I sprayed it red to body colour. My next pic will show this and makes the colour front another look.
The eye covers are also made by EGR. There is a black carbon trimming for the light covers but better stay with clear ones as they look better. Unless your car is black, else the carbon ones look strange with 2 holes for the lights to project out.