JDM Red Euro R
06-28-2006, 09:14 PM
#41
Three Wheelin'
Join Date: May 2004
Location: Massachusetts
Posts: 1,758
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by s001y
My model is relatively quite old, at least 5 years old and made by Mitsubishi. I have seen newer versions like what the Camry uses. There is also one version like the Mercedes type, where 2 arms slide up from both ends and raise the shade net.
Control unit is a simple up and down switch. Installation will mean the rear upper speakers may partially be covered and distort the rear speakers a little. SOlution, use the rear door for speakers but sound wise less effective. So, focus the sound from the front end and leave the rear empty......
Control unit is a simple up and down switch. Installation will mean the rear upper speakers may partially be covered and distort the rear speakers a little. SOlution, use the rear door for speakers but sound wise less effective. So, focus the sound from the front end and leave the rear empty......
(Of course, I'm sure that's true of a lot of people and all the different things you've done. =D )
06-28-2006, 11:19 PM
#42
Originally Posted by s001y
here you go, another pic...
Forgot to include my suspension is Tomei. Most of you may not have heard about it but it is like Tein SS rubber mount (Stock) and hardness of Flex. Settings are variable for front and rear. Gold casing and looks like Arragosta......muahahahah....
Forgot to include my suspension is Tomei. Most of you may not have heard about it but it is like Tein SS rubber mount (Stock) and hardness of Flex. Settings are variable for front and rear. Gold casing and looks like Arragosta......muahahahah....
06-29-2006, 07:44 PM
#49
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by afici0nad0
i'll post them up once i have some available.
05 graphite pearl
6mt
stock
05 graphite pearl
6mt
stock
Cool. Well about time you have a think about de-stocking.....so many new toys, just get a distraction now and then......What is on your mind for next mod?
06-29-2006, 09:59 PM
#53
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MyK24a
wahaha Uncle Shawn decided to venture into the TSX forum ah 
Hie Julian,
As you could recognise the beautiful shots you took of my car.......By the way, need your help to photo up the mods etc. Some of the friends here want to see what we have....from roller blinds to meters.....
06-29-2006, 10:44 PM
#56
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CL Platano
Nice whip, I had a milano red as a loaner once and loved it. If I were to ever get a tsx someday for the wifey it would definately be a red one.
Yup. My wifey also liked the Red and presto, I agreed as it was an exclusive Euro R colour besides the blue.
06-29-2006, 10:45 PM
#57
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by el chile grande
Beautiful color!
Yea, like the colour and maintenance is as difficult as black and white....red makes it striking richly bright spark....in day light..
06-30-2006, 03:29 AM
#60
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CJams
The car is beautiful! Love the red. But the bug shield needs to be replaced with a clear bra.
Thanks for the advice. I do have a clear version and this dark one was to give it a unique look......
06-30-2006, 07:50 AM
#61
Intermediate
Join Date: May 2006
Age: 46
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by s001y
Hello Loius,
so many lurkers now........hehehe, how is your ride? Still have your mods coming?
so many lurkers now........hehehe, how is your ride? Still have your mods coming?
so where are you now? SG or which part of the world? I will prob pop by Jerry's place 2 weeks later....
06-30-2006, 10:54 AM
#63
Burning Brakes
Join Date: Sep 2004
Location: Queensland, Australia
Age: 37
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by s001y
Thanks for the advice. I do have a clear version and this dark one was to give it a unique look......
07-01-2006, 04:38 AM
#67
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chris_F
keep the black, its something different
yea, as i thought and it does make it different and i may occassionally swap with the transparent one.....
Guess you guys have the full bra version which is useful for our runs on highway....some of the pebbles thrown up can be a craqck in the paint work....
muahahahah. Well, it will indeed bereverse of what most of you guys like..... 
07-04-2006, 07:44 PM
#70
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ShortyeuroR
sweeet euro R!!! damn it.
Cheers and thank u! Still working on some projs and some customised stuff and just my updated mods to date :
Mods
1. DIY Open pod air intake
2. APEXI RSM plus audio warning buzzer
3. Pivot 3 shift lights flash
4. manual overide clutch switch and 2 blue warning lights
5. Stand alone Electronic Compass gauge
6. Stand alone Electronic Pitch & Roll gauge
7. Pivot Grounding cables
8. Pivot Voltage stabiliser
9. S2000 gear knob
10. Mugen leather gear shift wrap
11. EGR light protectors and hood protector
12. DIY lower arm bar front and rear bar
13. CUSCO front strut upper
14. CUSCO 4 point brace lower
15. FujiSurbo Exhaust
16. Rear reverse sensors x 4 with distance read out
17. remote locking
18. ICE Pioneer 12 CD / MP3 + aux-Stock head unit with boozoka and amps
19. Glass tinting
20. Rear motorised shade
21. Red leather handbrake cover.
22. Alu Engine oil cover
23. Mugen fuel cap
24. Tomei coilovers
25. mesh covered fog lights
Coming soon
Flat wipers, customised lic plate holder, customised spoiler, customised grill etc
07-05-2006, 08:04 PM
#71
2nd Gear
Join Date: Apr 2005
Age: 51
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Wow, nice chio chio Red Euro-R. I like lah how much ah ?
:lol
:lol
Originally Posted by s001y
Hello to all,
It has been long since I last posted. I have been admiring the various rides here and just a short preview of some small projects on my ride....Please feel free to comment. They are just some basic stuff added to knock off boredom. Any technical discussion is also welcome.
Stock JDM LA-CL7 Euro R 2005 - 220bhp, 206 NM, i-vtec, DOHC, 6SP, Red
Mods
1. DIY Open pod air intake
2. APEXI RSM plus audio warning buzzer
3. Pivot 3 shift lights flash
4. manual overide clutch switch and 2 blue warning lights
5. Stand alone Electronic Compass gauge
6. Stand alone Pitch & Roll gauge
7. Pivot Grounding cables
8. Pivot Voltage stabiliser
9. S2000 gear knob
10. Mugen leather gear shift wrap
11. EGR light protectors and hood protector
12. DIY lower arm bar front and rear bar
13. CUSCO front strut upper
14. CUSCO 4 point brace lower
15. FujiSurbo Exhaust
16. Rear reverse sensors x 4 with distance read out
17. remote locking
18. ICE Pioneer 12 CD / MP3 + aux-Stock head unit with boozoka and amps
19. Glass tinting
20. Rear motorised shade
21. Red leather handbrake cover.
22. Aluminium engine cover
some other like fog light black netting, darkened reflectors etc.
More mods to come......includes customised rear spoiler....
I have not find time to put together more pics, so apologies.....
It has been long since I last posted. I have been admiring the various rides here and just a short preview of some small projects on my ride....Please feel free to comment. They are just some basic stuff added to knock off boredom. Any technical discussion is also welcome.
Stock JDM LA-CL7 Euro R 2005 - 220bhp, 206 NM, i-vtec, DOHC, 6SP, Red
Mods
1. DIY Open pod air intake
2. APEXI RSM plus audio warning buzzer
3. Pivot 3 shift lights flash
4. manual overide clutch switch and 2 blue warning lights
5. Stand alone Electronic Compass gauge
6. Stand alone Pitch & Roll gauge
7. Pivot Grounding cables
8. Pivot Voltage stabiliser
9. S2000 gear knob
10. Mugen leather gear shift wrap
11. EGR light protectors and hood protector
12. DIY lower arm bar front and rear bar
13. CUSCO front strut upper
14. CUSCO 4 point brace lower
15. FujiSurbo Exhaust
16. Rear reverse sensors x 4 with distance read out
17. remote locking
18. ICE Pioneer 12 CD / MP3 + aux-Stock head unit with boozoka and amps
19. Glass tinting
20. Rear motorised shade
21. Red leather handbrake cover.
22. Aluminium engine cover
some other like fog light black netting, darkened reflectors etc.
More mods to come......includes customised rear spoiler....
I have not find time to put together more pics, so apologies.....
07-05-2006, 08:29 PM
#72
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SnS
Wow, nice chio chio Red Euro-R. I like lah how much ah ?
:lol
:lol
I know u like red in the day and your grey looks beautiful at nite with the GC10 rims....... .....What are u doing here in the TSX forum???
07-06-2006, 01:36 AM
#73
2nd Gear
Join Date: Apr 2005
Age: 51
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Helo Shawn,
U just had your humble pie is it ? Me look see look see see got what things I can learn from the folks in US. :lol:
U just had your humble pie is it ? Me look see look see see got what things I can learn from the folks in US. :lol:
Originally Posted by s001y
Good morning SnS,
I know u like red in the day and your grey looks beautiful at nite with the GC10 rims....... .....What are u doing here in the TSX forum???
I know u like red in the day and your grey looks beautiful at nite with the GC10 rims....... .....What are u doing here in the TSX forum???
07-06-2006, 02:12 AM
#74
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SnS
Helo Shawn,
U just had your humble pie is it ? Me look see look see see got what things I can learn from the folks in US. :lol:
U just had your humble pie is it ? Me look see look see see got what things I can learn from the folks in US. :lol:
07-10-2006, 09:54 PM
#75
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Update so far......
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear shift
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Mugen front high speed tilt licensed plate holder
Mugen grill with black netting and Type R badge
Rear fin
Flat wipers
Simota Polyurethane exhaust bushings
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear shift
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Mugen front high speed tilt licensed plate holder
Mugen grill with black netting and Type R badge
Rear fin
Flat wipers
Simota Polyurethane exhaust bushings
07-12-2006, 05:16 AM
#76
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
12 July Update so far......
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear shift
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red badge
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Mugen front high speed tilt licensed plate holder
Rear fin
Flat wipers
:wish
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear shift
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red badge
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Mugen front high speed tilt licensed plate holder
Rear fin
Flat wipers
:wish
07-12-2006, 09:45 PM
#77
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
13 July Update so far......
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear shift
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red badge
41. Mugen front high speed tilt plate
42. Flat wipers
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Rear fin
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear shift
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red badge
41. Mugen front high speed tilt plate
42. Flat wipers
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Rear fin
07-13-2006, 02:48 AM
#79
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by afici0nad0
that's a long list...
keeps the pics coming.
keeps the pics coming.
Just putting the transformation and will take a while as I need to respray my rims and also touch up .....busy with work and travel , so not much time with the work on the car......and will do so when i get some time...
Thanks and stay tune...
07-13-2006, 02:51 AM
#80
Racer
Thread Starter
Join Date: Aug 2005
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
13 July Update so far......
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red badge
41. Mugen front high speed tilt plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Rear fin (not sure if I will do this as it makes the car seem strange....)
Modifications
1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red badge
41. Mugen front high speed tilt plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Rear fin (not sure if I will do this as it makes the car seem strange....)