Finally DONE Navi conversion
#47
I am extremely interested in the other set you have!!
Been looking locally for parts but can't find none, GOOD JOB MAN!
Your other set, it contains basically everything you would need to set this up? What if i wanted to also have the handsfree controls, can i simply get those from the dealer etc?
PM, sent. Thanks
Been looking locally for parts but can't find none, GOOD JOB MAN!
Your other set, it contains basically everything you would need to set this up? What if i wanted to also have the handsfree controls, can i simply get those from the dealer etc?
PM, sent. Thanks
#48
Originally Posted by AchcA
it comes with all the OEM connectors when i bought it. this is all about luck. it's very hard to find someone selling the TSX navi system with all the pig tail plugs.
VSS, ACC, +B, CAN H, CAN L, Back up switch, and dash light are the additional wiring which you have to find in your car and connect them to your navi display and dvd unit. other wires are just some signal goes from the display to the dvd unit.
VSS, ACC, +B, CAN H, CAN L, Back up switch, and dash light are the additional wiring which you have to find in your car and connect them to your navi display and dvd unit. other wires are just some signal goes from the display to the dvd unit.
So are these wires all on a single connector on the Navi display unit? So basicially, there are two new plugs (aside from the existing HVAC/stereo plugs), one that goes to the DVD unit, which I think you can just match the color of the wires on both sides, and the other plug contains the VSS, ACC, +B, etc wires?
Can you tell us where to tap into those wires?
Great job, btw!
#50
Originally Posted by MTLer
I am extremely interested in the other set you have!!
Been looking locally for parts but can't find none, GOOD JOB MAN!
Your other set, it contains basically everything you would need to set this up? What if i wanted to also have the handsfree controls, can i simply get those from the dealer etc?
PM, sent. Thanks
Been looking locally for parts but can't find none, GOOD JOB MAN!
Your other set, it contains basically everything you would need to set this up? What if i wanted to also have the handsfree controls, can i simply get those from the dealer etc?
PM, sent. Thanks
what year is your tsx? if you have 04 TSX then you only need the navi version homelink, handsfree controls and the harness (only $10) to do the handsfree control install. but if your TSX is 05 then you have to pay about 300+ for just to do the handsfree control install.
#51
Originally Posted by supraken
So are these wires all on a single connector on the Navi display unit? So basicially, there are two new plugs (aside from the existing HVAC/stereo plugs), one that goes to the DVD unit, which I think you can just match the color of the wires on both sides, and the other plug contains the VSS, ACC, +B, etc wires?
Can you tell us where to tap into those wires?
Great job, btw!
Can you tell us where to tap into those wires?
Great job, btw!
thanks
The ACC and +B go to display and dvd unit. VSS, CAN H and CAN L go to the DVD unit. there's two connectors that you need to added behind the display unit (one for display and one for audio unit). there are 4 connectors that you need to added hehind the dvd unit.
ACC is located at under dash fuse box (N36)
+B is located at left side of dash (below the sunroof and VSA switch)
CAN H and L are located behind the glove box. but that connector is missed for non-navi TSX so i took those signal behind the gauge control module.
#52
1) Someone should create a DETAILED writed up with Step by step instructions
2) I think we should find out how others can reproduce this more easily especially creating a package to buy for example all the Wires needed and etc.
So all one has to do is buy a navi unit.
2) I think we should find out how others can reproduce this more easily especially creating a package to buy for example all the Wires needed and etc.
So all one has to do is buy a navi unit.
#53
Nice job on the installation. You are one of the few pioneers and you are giving a lot more of us hopes that we can do the same. It doesn't seem nearly as intimidating as it did before your post.
Soon as I figure out an organized way to ask some questions, I will start asking. May have to scan a picture to show you what I am talking about.
Soon as I figure out an organized way to ask some questions, I will start asking. May have to scan a picture to show you what I am talking about.
#54
Originally Posted by AchcA
thanks
The ACC and +B go to display and dvd unit. VSS, CAN H and CAN L go to the DVD unit. there's two connectors that you need to added behind the display unit (one for display and one for audio unit). there are 4 connectors that you need to added hehind the dvd unit.
ACC is located at under dash fuse box (N36)
+B is located at left side of dash (below the sunroof and VSA switch)
CAN H and L are located behind the glove box. but that connector is missed for non-navi TSX so i took those signal behind the gauge control module.
The ACC and +B go to display and dvd unit. VSS, CAN H and CAN L go to the DVD unit. there's two connectors that you need to added behind the display unit (one for display and one for audio unit). there are 4 connectors that you need to added hehind the dvd unit.
ACC is located at under dash fuse box (N36)
+B is located at left side of dash (below the sunroof and VSA switch)
CAN H and L are located behind the glove box. but that connector is missed for non-navi TSX so i took those signal behind the gauge control module.
Thanks for the info, it's a little more complex than I thought, but I guess still manageable. So when are you going to take a trip to the East Coast? I'll hire you for 2 days to do the conversion for me
Joking aside, I noticed that you didn't get a new clock/temp display unit. Any problems with that? or you rely on the Navi display for that information?
#55
Originally Posted by supraken
Thanks for the info, it's a little more complex than I thought, but I guess still manageable. So when are you going to take a trip to the East Coast? I'll hire you for 2 days to do the conversion for me
Joking aside, I noticed that you didn't get a new clock/temp display unit. Any problems with that? or you rely on the Navi display for that information?
Joking aside, I noticed that you didn't get a new clock/temp display unit. Any problems with that? or you rely on the Navi display for that information?
i did get the sub-display unit for navi model. you need to enter the CD player code in that sub-display. with the sub-display, you can still control the climate and audio without using the navi LCD.
#56
Originally Posted by A Cake On
Nice job on the installation. You are one of the few pioneers and you are giving a lot more of us hopes that we can do the same. It doesn't seem nearly as intimidating as it did before your post.
Soon as I figure out an organized way to ask some questions, I will start asking. May have to scan a picture to show you what I am talking about.
Soon as I figure out an organized way to ask some questions, I will start asking. May have to scan a picture to show you what I am talking about.
#57
Originally Posted by xenonhid
1) Someone should create a DETAILED writed up with Step by step instructions
2) I think we should find out how others can reproduce this more easily especially creating a package to buy for example all the Wires needed and etc.
So all one has to do is buy a navi unit.
2) I think we should find out how others can reproduce this more easily especially creating a package to buy for example all the Wires needed and etc.
So all one has to do is buy a navi unit.
#58
its alright but to help the other members, how about a more detailed parts list?
Please add to this and clarify and elaborate if you wish
Navigation (39540-SEC-A01)
H-VAC display unit (tv)
Navigation Dvd (39010-SDA-A41)
Sub clock display unit (39710-SEC-A51)
Sub wire, cable reel harness (behind airbag) (77901-SDA-A40)
GPS antenna (39835-SEC-A01)
Homelink buttons (navi edition includes a mic) (34404-SDA-A21)
Switch assy., Navigation Guide (35890-SEC-A01)
Case (3A) for switch assy (35891-SEC-A01)
Plate switch set (78517-SDN-A81)
2x Screw-washer (4X12) (93893-04012-07)
2x Screw-washer (4X12 ) (93893-04012-17)
Some clarification on
1) Size 22 wire
2) CAN H and CAN etc wires is this part of the pigtail wiring you luckily got?
Please add to this and clarify and elaborate if you wish
Navigation (39540-SEC-A01)
H-VAC display unit (tv)
Navigation Dvd (39010-SDA-A41)
Sub clock display unit (39710-SEC-A51)
Sub wire, cable reel harness (behind airbag) (77901-SDA-A40)
GPS antenna (39835-SEC-A01)
Homelink buttons (navi edition includes a mic) (34404-SDA-A21)
Switch assy., Navigation Guide (35890-SEC-A01)
Case (3A) for switch assy (35891-SEC-A01)
Plate switch set (78517-SDN-A81)
2x Screw-washer (4X12) (93893-04012-07)
2x Screw-washer (4X12 ) (93893-04012-17)
Some clarification on
1) Size 22 wire
2) CAN H and CAN etc wires is this part of the pigtail wiring you luckily got?
#60
Must . . . resist . . . buying . . . navi unit . . . and . . . installing myself. I'd love to have the factory nav, especially in the sub-$1000 range. Maybe one of these days, while I still have a third car.
#64
Originally Posted by die4you
AchcA.......I can't send a pm message to u. Do you still have oem dvd-navi unit?
For those who wants to buy the used oem navi system, you MUST find the system which also come with all the connectors. This will make your conversion much much easy
#66
AchcA
thank you for replay.^^
do you know where can i find it? or where do you find it?. thanks.
thank you for replay.^^
do you know where can i find it? or where do you find it?. thanks.
Originally Posted by AchcA
Sorry, I sold the navi unit. thx
For those who wants to buy the used oem navi system, you MUST find the system which also come with all the connectors. This will make your conversion much much easy
For those who wants to buy the used oem navi system, you MUST find the system which also come with all the connectors. This will make your conversion much much easy
#69
Great Job!!! I would do it if I didn't get nav from the getgo. You're the second to document it here. Your trade in value also went up. Gotta love that part! Congrats! now get Doms nav to vid conversion unit
#72
Originally Posted by peterjedi
I hear the 2006 Nav is faster and has Zaggat. Would this be a easy upgrade?
I asked the dealer but they didn't know.
I asked the dealer but they didn't know.
https://acurazine.com/forums/showthr...5&page=1&pp=25
#73
Originally Posted by CJams
Did you add the steering wheel controls or no?
#74
Originally Posted by AchcA
You just need to buy the 06 navi dvd unit and then replace with your 05 unit.
https://acurazine.com/forums/showthr...5&page=1&pp=25
https://acurazine.com/forums/showthr...5&page=1&pp=25
#75
Originally Posted by peterjedi
I have an 2004 TSX. Would this cause any problems?
#76
Originally Posted by AchcA
do you mean voice command? I didn;t add it cause i don;t want to spend extra $300 for those parts. IMO, it's worthless without bluetooth functions like 06 tsx
#78
Originally Posted by die4you
AchcA..
let me have a question. do i really need a service book? for oem navi?
also, is it hard to assbemly to 04 tsx?
is it hard to make a pig tail connection?,..
compuse it,,, all mix up in my head..T.T
let me have a question. do i really need a service book? for oem navi?
also, is it hard to assbemly to 04 tsx?
is it hard to make a pig tail connection?,..
compuse it,,, all mix up in my head..T.T
You may not need the service manual but i highly recommended to buy the electrical manual. You need it for making the harness with your oem connector.
#79
thanks a lot. If I have more question, let me ask to you.
Originally Posted by AchcA
You may not need the service manual but i highly recommended to buy the electrical manual. You need it for making the harness with your oem connector.