ALL Injen CAI Check-in please!
#1
Pro
Thread Starter
Join Date: Apr 2003
Location: Philadelphia, PA
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
ALL Injen CAI Check-in please!
So my buddy and I go to install my CAI tonight. Expected it to be an hour or so. We went through the wheel well, much easier than taking off the bumper (took off the fog light cover as well). Everything went pretty well and smooth until we had to get that 11" rubber hose on.
We spent about 20-30 mins trying to get the one end onto the CAI tube. It got dark and started to rain, so we improvised with a little foil tape for now. We just couldn't get the damn thing on.
Did anyone else have trouble or did Injen F-UP my order with the wrong hose size? The hose is way too small to fit around the pipe. The hose itself could fit into the opening on the pipe.
Save me please!
Thanks!
We spent about 20-30 mins trying to get the one end onto the CAI tube. It got dark and started to rain, so we improvised with a little foil tape for now. We just couldn't get the damn thing on.
Did anyone else have trouble or did Injen F-UP my order with the wrong hose size? The hose is way too small to fit around the pipe. The hose itself could fit into the opening on the pipe.
Save me please!
Thanks!
#3
Drifting
Join Date: Oct 2003
Location: Northern VA
Age: 51
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
I think I know exactly what you are talking about--is it the vacuum hose? That thing was a PITA. I think it's meant to be tight so that it's secure, but it took two people to get that thing on.
#4
Pro
Thread Starter
Join Date: Apr 2003
Location: Philadelphia, PA
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ricecake
I think I know exactly what you are talking about--is it the vacuum hose?
PITA?
#5
VP Electricity
Join Date: Jun 2004
Location: Portland OR US
Age: 58
Posts: 4,617
Likes: 0
Received 8 Likes
on
1 Post
If it was chilly weather, you want to heat it up with a heat gun or blow dryer - makes it softer and more flexible. Also, put some liquid soap onto the metal end you are sliding it onto.
#7
ATCer
Join Date: Jan 2004
Location: Houston, TX
Age: 49
Posts: 3,146
Likes: 0
Received 0 Likes
on
0 Posts
It's meant to be smaller so it will fit tight since it has no clamps. Cheap ass company should have just given us the same size hoses and we could reuse the clamps, or get new ones from Injen....oh well. You're doing nothing wrong, just have a little patience. The more frustrated you get, the harder it will actually become!
Trending Topics
#9
Pro
Thread Starter
Join Date: Apr 2003
Location: Philadelphia, PA
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by joerockt
Huh, I didnt have any problems with it. Seemed to fit perfectly for me...
damn it... I don't like how that sounds. I guess I will be giving Injen a call.
#10
Drifting
Join Date: Oct 2003
Location: Northern VA
Age: 51
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DjElucid
YUP! I think that's it. How did you get it on? W tried to stretch the hose and everything, no luck.
PITA?
PITA?
#14
Cruise Missile Lobber
Join Date: Aug 2003
Location: Newington, CT
Age: 46
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
I remember it being a little hard...I just rocked it back and forth to get it on. It sounds like you're having more trouble than I did though.
#15
Just dial 1911
Join Date: May 2004
Location: San Diego, CA
Age: 49
Posts: 12,144
Likes: 0
Received 1 Like
on
1 Post
You know, I was just thinking. This picture here:
http://www.rpi.edu/~leej19/intake/Intake%20017s.jpg
Shows a different setup that what I had. At the elbow where that long tube is, I was instruted to use the hose that was already there and a piece of the stock system, its the one in this pic, the small piece at the top right.
http://www.rpi.edu/~leej19/intake/IMG_0108s.jpg
I used this piece and the kit came with a silicon tube that had clamps. That silicon tube linked that small stock piece with the inlet on the intake. So, really different then the pic above.
I will take a picture tonight.
http://www.rpi.edu/~leej19/intake/Intake%20017s.jpg
Shows a different setup that what I had. At the elbow where that long tube is, I was instruted to use the hose that was already there and a piece of the stock system, its the one in this pic, the small piece at the top right.
http://www.rpi.edu/~leej19/intake/IMG_0108s.jpg
I used this piece and the kit came with a silicon tube that had clamps. That silicon tube linked that small stock piece with the inlet on the intake. So, really different then the pic above.
I will take a picture tonight.
#16
Cruise Missile Lobber
Join Date: Aug 2003
Location: Newington, CT
Age: 46
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
I think you're on to something here...I just can't remember exactly. It was so long ago. I did use a pre-existing hose for something and the 11 incher for something else....O2 sensor maybe. If you don't figure it our today I get home around 9PM EST tonight and I'll take a look. Damn I hate duty!!!! Recruiter didn't tell me about duty
#17
Registered AssHat
Join Date: Feb 2003
Location: Portland, OR
Age: 46
Posts: 3,777
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by joerockt
You know, I was just thinking. This picture here:
http://www.rpi.edu/~leej19/intake/Intake%20017s.jpg
Shows a different setup that what I had. At the elbow where that long tube is, I was instruted to use the hose that was already there and a piece of the stock system, its the one in this pic, the small piece at the top right.
http://www.rpi.edu/~leej19/intake/IMG_0108s.jpg
I used this piece and the kit came with a silicon tube that had clamps. That silicon tube linked that small stock piece with the inlet on the intake. So, really different then the pic above.
I will take a picture tonight.
http://www.rpi.edu/~leej19/intake/Intake%20017s.jpg
Shows a different setup that what I had. At the elbow where that long tube is, I was instruted to use the hose that was already there and a piece of the stock system, its the one in this pic, the small piece at the top right.
http://www.rpi.edu/~leej19/intake/IMG_0108s.jpg
I used this piece and the kit came with a silicon tube that had clamps. That silicon tube linked that small stock piece with the inlet on the intake. So, really different then the pic above.
I will take a picture tonight.
#18
Just dial 1911
Join Date: May 2004
Location: San Diego, CA
Age: 49
Posts: 12,144
Likes: 0
Received 1 Like
on
1 Post
Possibly. But do we have the old one, or do they? I just did mine last week. He did his the other night. The place I bought mine from is pretty much right down the road from Injen. So, I dunno
#19
Registered AssHat
Join Date: Feb 2003
Location: Portland, OR
Age: 46
Posts: 3,777
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by joerockt
Possibly. But do we have the old one, or do they? I just did mine last week. He did his the other night. The place I bought mine from is pretty much right down the road from Injen. So, I dunno
#25
Drifting
Join Date: Oct 2003
Location: Northern VA
Age: 51
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by soopa
whos the dude who goes to RPI?
ricecake, whose brother and sister in law went there
#26
Cruise Missile Lobber
Join Date: Aug 2003
Location: Newington, CT
Age: 46
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by soopa
whos the dude who goes to RPI?
I said that I stayed at RPI for Empire State Games a few years back in a different thread...is that what you mean?
#28
Just dial 1911
Join Date: May 2004
Location: San Diego, CA
Age: 49
Posts: 12,144
Likes: 0
Received 1 Like
on
1 Post
Dood, I would call whoever you got that kit from and tell them to send you out the right parts. Better yet, call Injen and tell them what you got. There is no way they would ship something like that out of the box.
#30
Drifting
Join Date: Oct 2003
Location: Northern VA
Age: 51
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
DJEuclid, I am going to move this to the Performance forum, if you don't mind--I have a hunch that there are posters that frequent that forum more often than this one who might have a better idea as to why the hose isn't fitting. PM me if you have any questions.
#33
Just dial 1911
Join Date: May 2004
Location: San Diego, CA
Age: 49
Posts: 12,144
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by domn
I hav'nt installed my Injen yet but the pipe sticking out of the intake looks to thick for the hose I think?
I don't think the hose is the problem here?
I don't think the hose is the problem here?
#34
Drifting
Join Date: Oct 2003
Location: Northern VA
Age: 51
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by joerockt
ricecake, take a look at his pictures. Pretty obvious why its not fitting. He didnt get the right parts in the kit they sent him.
For what it's worth, your setup is different than Dj's, but Dj's is common to the Injen units that we've seen (mine included). What I am saying is that there might be possible explanations--it isn't uncommon for the hose that attaches to the nipple on the primary intake to be tight.
#36
Baka Unco
Join Date: Feb 2004
Location: Beaverton, OR
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
The part that the tube is attaching to seems unusually large. The tube itself seems correct/normal.
Here's a picture of mine before while it was still in SRI mode. . .
Here's a picture of mine before while it was still in SRI mode. . .
#37
Senior Moderator
Originally Posted by corbs
The part that the tube is attaching to seems unusually large. The tube itself seems correct/normal.
Thats what I was saying. Maybe they sent him piping from an RSX or something?
#39
Advanced
Join Date: May 2004
Location: 503 Oregon
Age: 45
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
what is up with that huge box coming off the intake...
hmm... anyone want to host my images? this sucks. aww... crap i'm not a homepage builder... anyways... I don't have that box coming off mine, but those stretched hoses don't look right at all...
hmm... anyone want to host my images? this sucks. aww... crap i'm not a homepage builder... anyways... I don't have that box coming off mine, but those stretched hoses don't look right at all...
Thread
Thread Starter
Forum
Replies
Last Post
lanechanger
Member Cars for Sale
4
10-13-2015 10:56 AM