Help Needed!!!

Thread Tools
 
Search this Thread
 
Old 11-28-2004, 09:37 PM
  #1  
Gentlemen Racer
Thread Starter
 
Kanon23's Avatar
 
Join Date: Jul 2003
Location: Vancouver, BC
Age: 46
Posts: 603
Likes: 0
Received 0 Likes on 0 Posts
Help Needed!!!

Guys I need help. I just changed my windshield and fog light because of rock chips (highway driving). Guess what? Not even a month I already got a chip on my fog light! FAWK!

So aside from replace it again does anyone have some solutions so it won't break on me? A guy from my insurance suggested using silicone to fill the void. I know it kinda works but it doesn't look too good...anyone have experience to this matter or should I just suck it up?

Thanks for the help in advance.

Old 11-28-2004, 11:02 PM
  #2  
Racer
 
euroStyle's Avatar
 
Join Date: May 2004
Location: LA, CA
Age: 41
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts
you can try stuff like clear bra, they make stuff for fog lights.
www.stoneguard.com (they make good stuff, kind of expensive though, alot of people from audiworld, my last home, use their stuff.)

http://www.clearbra.com/ (x-pel) has good stuff too.

these are the two popular brands/place i know of when i was with the audi family.
good luck.
Old 11-28-2004, 11:43 PM
  #3  
Moderator Alumnus
 
sauceman's Avatar
 
Join Date: Jul 2003
Location: Windsor-Quebec corridor
Age: 47
Posts: 7,709
Likes: 0
Received 6 Likes on 4 Posts
Originally Posted by euroStyle
you can try stuff like clear bra, they make stuff for fog lights.
www.stoneguard.com (they make good stuff, kind of expensive though, alot of people from audiworld, my last home, use their stuff.)

http://www.clearbra.com/ (x-pel) has good stuff too.

these are the two popular brands/place i know of when i was with the audi family.
good luck.
Careful with the clear bra on the fog lights! A few members have reported that the foglights get hot enough that they will bake the film, and it turns brown, making it less than elegant.
Old 11-28-2004, 11:54 PM
  #4  
Gentlemen Racer
Thread Starter
 
Kanon23's Avatar
 
Join Date: Jul 2003
Location: Vancouver, BC
Age: 46
Posts: 603
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by sauceman
Careful with the clear bra on the fog lights! A few members have reported that the foglights get hot enough that they will bake the film, and it turns brown, making it less than elegant.
That's why I didn't use it...and I got chipped...it's a small hole...what should I do?
Old 11-28-2004, 11:57 PM
  #5  
Moderator Alumnus
 
sauceman's Avatar
 
Join Date: Jul 2003
Location: Windsor-Quebec corridor
Age: 47
Posts: 7,709
Likes: 0
Received 6 Likes on 4 Posts
I don't know. That's why I decided to drop the foglights on mine, because I knew within a month I'd have them both busted and I wouldn't really be able to do anything about it.

I used to have pieces of Lexan I had molded with a heat gun to put over some PIAA foglights I had, but it didn't really work out too well, because the Lexan got really sandblasted in no time, and it looked like crap afterwards.
Old 11-29-2004, 09:10 AM
  #6  
Team Owner
iTrader: (1)
 
CGTSX2004's Avatar
 
Join Date: Feb 2004
Location: Beach Cities, CA
Posts: 24,299
Received 378 Likes on 198 Posts
Originally Posted by sauceman
Careful with the clear bra on the fog lights! A few members have reported that the foglights get hot enough that they will bake the film, and it turns brown, making it less than elegant.
This apparently only occurs when you leave the fog lights on while the vehicle is sitting still. There is not enough air flowing over the lights to cools them, which results in the burns. Best way to prevent this is to simply turn the fog lights off while the vehicle is not in motion.
Old 11-29-2004, 10:31 AM
  #7  
Obnoxious Philadelphian
 
jcg878's Avatar
 
Join Date: Jul 2003
Location: South Jersey
Age: 47
Posts: 5,549
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CGTSX2004
This apparently only occurs when you leave the fog lights on while the vehicle is sitting still. There is not enough air flowing over the lights to cools them, which results in the burns. Best way to prevent this is to simply turn the fog lights off while the vehicle is not in motion.
I am too cautious to rely on that. What about in areas such as where you and I (and TRU) live where you're often stuck in traffic? Is 3 mph fast enough to prevent browning?
Old 11-29-2004, 10:36 AM
  #8  
Team Owner
iTrader: (1)
 
CGTSX2004's Avatar
 
Join Date: Feb 2004
Location: Beach Cities, CA
Posts: 24,299
Received 378 Likes on 198 Posts
Originally Posted by jcg878
I am too cautious to rely on that. What about in areas such as where you and I (and TRU) live where you're often stuck in traffic? Is 3 mph fast enough to prevent browning?
Hard to say. I know that TRU said he left his lights on with the car parked for well over half an hour while he was trying to shoot some pics.
Old 11-29-2004, 10:47 AM
  #9  
 
dabuda's Avatar
 
Join Date: Jul 2003
Posts: 11,967
Likes: 0
Received 1 Like on 1 Post
i've had clearbra type shield on my fogs for over a year now. so far no chips but there is browing from the foglight heat.
Old 11-29-2004, 07:03 PM
  #10  
I feel the need...
 
Fibonacci's Avatar
 
Join Date: May 2004
Location: Motown
Posts: 14,957
Received 515 Likes on 363 Posts
I hate to rain on your parade...but do fog lights really add value other than appearance? I only hear of complaints about them. A high school buddy of mine is a cop -- once told me that at night, he'd always notice a car coming at him with fogs more often than one without.

PistonFan: who prefers to keep his speeding on the down low.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
oo7spy
2G RL (2005-2012)
18
06-19-2023 12:48 AM
notfast
1/2G MDX (2001-2013)
9
03-28-2023 08:10 AM
2015TLX
5G TLX (2015-2020)
1
09-11-2015 02:56 PM
nuldabz
3G TL Tires, Wheels & Suspension
3
09-03-2015 05:49 PM



Quick Reply: Help Needed!!!



All times are GMT -5. The time now is 02:38 PM.