Factory Headlights Aim Spec
#1
BOSTON TSX
Thread Starter
Join Date: Dec 2005
Location: Brookline, MA
Age: 38
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Factory Headlights Aim Spec
Can anyone show me a picture of their headlight aims? I went back to the dealship for 10,000 miles service. The service advisor told me that my right headlight aims too high and they made an adjustment to the factory spec. I was charged 30 bucks for the adjustment b/c the headlights are covered by the warrenty for 1 year/12,000 miles. When I came back home, I didn't see much difference before and after the adjustment.
1)
................................._______
________________/ \___________________
or
2)..............................__________________ ________ ??
________________/
1)
................................._______
________________/ \___________________
or
2)..............................__________________ ________ ??
________________/
#2
Three Wheelin'
Join Date: Jun 2006
Location: Philadelphia Burbs
Age: 40
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
That is crap! If you do a search there is a thread with scanned in PDF's of the factory alignment specs and how to do it with pictures as well.
#4
Three Wheelin'
Join Date: Jun 2006
Location: Philadelphia Burbs
Age: 40
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
Here is the link with pics and PDF's i was talking about.... https://acurazine.com/forums/showthr...ght+adjustment
That should take care of any and all questions you have
That should take care of any and all questions you have
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#5
Unauthorized User
$30 bucks for just adjusting the headlights, dude you got ripped.
You could've just told them that you can do it yourself isn't hard to do only takes a minute.
You could've just told them that you can do it yourself isn't hard to do only takes a minute.
#6
BOSTON TSX
Thread Starter
Join Date: Dec 2005
Location: Brookline, MA
Age: 38
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for all of your reponses!
I knew I was ripped off when I was paying. The guy told me the price after the job was done. He never asked me if I wanted to do it or not. There's nothing I could have done about it.
I knew I was ripped off when I was paying. The guy told me the price after the job was done. He never asked me if I wanted to do it or not. There's nothing I could have done about it.
#7
Registered Car Nut
Join Date: Oct 2006
Location: Montreal, QC
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Call it a learning experience! I always ask how much before they do anything on my cars... they probably have a minimum charge policy on the labour... which would explain the $30 although it probably took them 2 minutes...
Trending Topics
#8
#9
Apologies for reviving an ancient thread.
Thanks for the FSM scan!
I have a question.
The FSM only states that the cutoff should be 2.1" below the center height measurement of the headlights at 25 feet away.
My question is what's the height measurement of the factory lights? My car is lowered so this recommendation doesn't help much. I lost quite a bit of night time visibility when I lowered. I need to aim them up just a tad. (No I'm not going to blind everyone!! Lol)
I hope someone can help. Thanks!!
Thanks for the FSM scan!
I have a question.
The FSM only states that the cutoff should be 2.1" below the center height measurement of the headlights at 25 feet away.
My question is what's the height measurement of the factory lights? My car is lowered so this recommendation doesn't help much. I lost quite a bit of night time visibility when I lowered. I need to aim them up just a tad. (No I'm not going to blind everyone!! Lol)
I hope someone can help. Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
11-16-2015 08:30 PM
pistacio
2G TL (1999-2003)
10
09-26-2015 09:45 AM