Complete TSX LED replacement guide (link on pg. 17)
10-09-2007, 01:06 PM
#401
Suzuka Master
Join Date: Jul 2003
Location: Cincinnati, OH
Age: 48
Posts: 7,594
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by thunder04
Did anybody ever find a place to host the guide? If not, I can host it. I run my own little homebrewed webserver, and was actually pondering buying a TSX related domain name. :-D
10-09-2007, 01:45 PM
#402
boost owns
Anyone know the bulbs for the glove compartment and the trunk? Those are the only two I need to have the interior totally done and I want to get it over with finally. Thanks!
10-09-2007, 06:28 PM
#403
Suzuka Master
Join Date: Jul 2003
Location: Cincinnati, OH
Age: 48
Posts: 7,594
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by Audioserf
Anyone know the bulbs for the glove compartment and the trunk? Those are the only two I need to have the interior totally done and I want to get it over with finally. Thanks!
10-10-2007, 03:18 PM
#408
Suzuka Master
Join Date: Jul 2003
Location: Cincinnati, OH
Age: 48
Posts: 7,594
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by CGTSX07
^thunder, awesome list. Moda_way, you should post the link on the first page so people won't have to go to page 17 to find it.
10-15-2007, 06:28 AM
#410
Pro
Join Date: Nov 2005
Location: CT
Age: 52
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moda_way
Yep, those are the ones. Hoen is just top notch, quality stuff. Probably won't be as intense as the LEDs were, but I'll take that over having to replace them every few months. 
anybody got those Hoen bulbs in for the license plates yet?
10-15-2007, 11:25 AM
#411
where is my garage?!
iTrader: (2)
Join Date: Oct 2006
Location: nassau county, ny
Age: 46
Posts: 1,857
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by DLTSX6MT
anybody got those Hoen bulbs in for the license plates yet?
i'll try to post some pics.
10-15-2007, 10:20 PM
#413
07 NHBP
Join Date: Jul 2007
Location: Lake Forest, Illinois
Age: 50
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Alright, Im totally confused! I want to buy the rear LED license plate bulbs but for some reason I cant seen to figure out what kind they are. Any help would be greatly appreciated! :>
10-15-2007, 10:40 PM
#414
Instructor
Join Date: Aug 2007
Age: 37
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thunder04
*drum roll*
The TSX LED replacement guide can now be found on my personal server here:
http://tsx.hhsn.net/leds/
The TSX LED replacement guide can now be found on my personal server here:
http://tsx.hhsn.net/leds/
damn thunder good looking... great find
01-05-2008, 09:42 PM
#415
Instructor
Join Date: Mar 2007
Location: So CA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Im trying to replace my white Back up lights (which is 7440 stock), by a brighter LED bulb from www.superbrightleds.com
Can anyone advise if Im looking at the right replacement:
7440-15 LED bulb "has 9 LEDs aiming out the end and 6 radially mounted LEDs aiming 90 degrees from the base"
or
7440-xHP3 LED bulb "Our brightest 7440 bulb,3 High Power LEDs, Wide 120 degree Viewing Angle"
If it is the right replacment I will get the 7440-xHP3 LED bulb
any input
Can anyone advise if Im looking at the right replacement:
7440-15 LED bulb "has 9 LEDs aiming out the end and 6 radially mounted LEDs aiming 90 degrees from the base"
or
7440-xHP3 LED bulb "Our brightest 7440 bulb,3 High Power LEDs, Wide 120 degree Viewing Angle"
If it is the right replacment I will get the 7440-xHP3 LED bulb
any input
01-06-2008, 07:14 PM
#416
Instructor
Join Date: Mar 2007
Location: So CA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by csun2004
Im trying to replace my white Back up lights (which is 7440 stock), by a brighter LED bulb from www.superbrightleds.com
Can anyone advise if Im looking at the right replacement:
7440-15 LED bulb "has 9 LEDs aiming out the end and 6 radially mounted LEDs aiming 90 degrees from the base"
or
7440-xHP3 LED bulb "Our brightest 7440 bulb,3 High Power LEDs, Wide 120 degree Viewing Angle"
If it is the right replacment I will get the 7440-xHP3 LED bulb any input
Can anyone advise if Im looking at the right replacement:
7440-15 LED bulb "has 9 LEDs aiming out the end and 6 radially mounted LEDs aiming 90 degrees from the base"
or
7440-xHP3 LED bulb "Our brightest 7440 bulb,3 High Power LEDs, Wide 120 degree Viewing Angle"
If it is the right replacment I will get the 7440-xHP3 LED bulb
any input
01-07-2008, 03:44 AM
#417
O.o
Join Date: Feb 2007
Location: Buckeye, AZ
Age: 40
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by csun2004
Im trying to replace my white Back up lights (which is 7440 stock), by a brighter LED bulb from www.superbrightleds.com
Can anyone advise if Im looking at the right replacement:
7440-15 LED bulb "has 9 LEDs aiming out the end and 6 radially mounted LEDs aiming 90 degrees from the base"
or
7440-xHP3 LED bulb "Our brightest 7440 bulb,3 High Power LEDs, Wide 120 degree Viewing Angle"
If it is the right replacment I will get the 7440-xHP3 LED bulb any input
Can anyone advise if Im looking at the right replacement:
7440-15 LED bulb "has 9 LEDs aiming out the end and 6 radially mounted LEDs aiming 90 degrees from the base"
or
7440-xHP3 LED bulb "Our brightest 7440 bulb,3 High Power LEDs, Wide 120 degree Viewing Angle"
If it is the right replacment I will get the 7440-xHP3 LED bulb
any inputi will be getting the Luxeon LED bulb for my reverse lights
01-07-2008, 09:02 AM
#418
Instructor
Join Date: May 2004
Location: Charlotte, NC
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
I have thier regular 7443-15 led Red as my break lights. I had the 7449xHP3 in red but I did not think they were brighter than the 15led. Looking at the lights head on I could see the power of the HP3 but I though the 15 Led did a better job of lighting up the whole housing.
Just my 2 Cents
I hope the Luxeons will be even brighter since they have 130 Degree dispusrement
Just my 2 Cents
I hope the Luxeons will be even brighter since they have 130 Degree dispusrement
01-07-2008, 05:17 PM
#421
Instructor
Join Date: Mar 2007
Location: So CA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Led
I am placing my order for LEDs I just need to confirm. Am I supposed to purchase the tail light bulbs and the stop lights bulbs in White? or Red?
Does it matter if I get them in red?
Does it matter if I get them in red?
01-07-2008, 05:21 PM
#422
O.o
Join Date: Feb 2007
Location: Buckeye, AZ
Age: 40
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by csun2004
I am placing my order for LEDs I just need to confirm. Am I supposed to purchase the tail light bulbs and the stop lights bulbs in White? or Red?
Does it matter if I get them in red?
Does it matter if I get them in red?
01-08-2008, 06:40 AM
#424
Originally Posted by csun2004
I am placing my order for LEDs I just need to confirm. Am I supposed to purchase the tail light bulbs and the stop lights bulbs in White? or Red?
Does it matter if I get them in red?
Does it matter if I get them in red?
.
01-09-2008, 10:27 PM
#425
Instructor
Join Date: Mar 2007
Location: So CA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CoquiTSX
I believe it’s recommended to get them in red. When you use white or any other color, any color other than red will be filtered by the red lens. So in theory you could have a different color light, brighter than a red light if put side by side, but when put behind a red lens it would look dimmer since red light is the only light that is not filtered by the red lens. That's what I remembered from reading more posts than I care a couple of years ago .
.
01-15-2008, 06:39 PM
#426
Advanced
Join Date: Aug 2007
Age: 42
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
is it me or is the Festoon 3022x4 not bright enough for the dome lights?? Can anyone recommend one with more than 4 LED dots?
By the way, does anyone know how to remove the two plastic covers holding the two front dome lights?
By the way, does anyone know how to remove the two plastic covers holding the two front dome lights?
01-16-2008, 05:56 AM
#427
Suzuka Master
Join Date: Jul 2003
Location: Cincinnati, OH
Age: 48
Posts: 7,594
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by justinangil
is it me or is the Festoon 3022x4 not bright enough for the dome lights?? Can anyone recommend one with more than 4 LED dots?
By the way, does anyone know how to remove the two plastic covers holding the two front dome lights?
By the way, does anyone know how to remove the two plastic covers holding the two front dome lights?
Already been discussed in the 17 pages, but for review....
Wrap electrical tape around a thin flat head screw driver.
Pry them out carefully from a corner.
Yep... its that simple.
01-16-2008, 06:18 AM
#428
Pro
For all those people our there who are planning on purchasing the led stop lights be warned that it probably won't disperse the light in the housing. A few months ago I was behind a Ford F-150 with them and all that I could see is a red light the size of a quarter on that housing. I can tell you that if someone ends up hitting your car and you have these on that you could be held at fault for not having proper lighting. I doubt that these are even street legal. Be warned.
07-05-2008, 12:44 PM
#430
JDM Addict
Originally Posted by MMsTSX
DOOR LIGHTS:
TRUNK LIGHT:
LICENSE PLATE LIGHTS:
http://www.superbrightleds.com/mini-wedge.html
scroll down till you see:
WLED-WHP LED Wedge Base Bulbs
Buy these, they're a blue/white glow, very nice and bright
You'll need at least 5 of these.
------------------------------------------------------------------------------------
VANITY LIGHTS:
http://autolumination.com/festoon.htm
scroll down till you see:
Vanity Mini 3 Led SMT Festoon
You'll need to buy 2 (at least)
Get white, they glow blue/white.
-----------------------------------------------------------------------------------
MAP LIGHTS:
DOME LIGHT:
http://autolumination.com/festoon.htm
scroll down till you see:
6 LED Super High Flux
You'll need to buy 3 (at least) of the:
31mm = 1-1/4" Long 6LED
I'd get the white, it matches the blue/white hue perfectly of the others
------------------------------------------------------------------------------------
CENTER CUBBY LIGHT:
GLOVE BOX LIGHT:
http://www.superbrightleds.com/cgi-b...8.2376&next=50
scroll down until you see:
74-xHP Wedge Base LED Bulb
you'll need about 2 or so of these, in white. they also glow blue/white.
-------------------------------------------------------------------------------------
there you have it.
here, this is just to add.
07-07-2008, 12:00 AM
#431
Pro
Join Date: Nov 2005
Location: CT
Age: 52
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MMsTSX
here, this is just to add.
07-07-2008, 12:17 AM
#432
CL9 ABP
iTrader: (1)
Join Date: Feb 2005
Location: Commack, Long Island -> Queens NY
Age: 37
Posts: 4,528
Received 245 Likes
on
112 Posts
The gear shifter light can be replaced with a
http://www.superbrightleds.com/cgi-...38.2376&next=50
scroll down until you see:
74-xHP Wedge Base LED Bulb
Problem is it needs to be glued in or taped down into the socket. since its a bit larger.
The white led i did lights up the shifter partially but its better than having it out.
Not as good as i expected but enough to illuminate it
For jdm headlights i replaced my 2 led piaa leds with 194
WLED-x5 LED Wide Angle LED bulb
12 VDC 5-LED
http://www.superbrightleds.com/cgi-b...8.2376&next=50
They really light up my jdm corners well. since now they go beyond the clear lens.
http://www.superbrightleds.com/cgi-...38.2376&next=50
scroll down until you see:
74-xHP Wedge Base LED Bulb
Problem is it needs to be glued in or taped down into the socket. since its a bit larger.
The white led i did lights up the shifter partially but its better than having it out.
Not as good as i expected but enough to illuminate it
For jdm headlights i replaced my 2 led piaa leds with 194
WLED-x5 LED Wide Angle LED bulb
12 VDC 5-LED
http://www.superbrightleds.com/cgi-b...8.2376&next=50
They really light up my jdm corners well. since now they go beyond the clear lens.
07-07-2008, 11:43 AM
#433
where is my garage?!
iTrader: (2)
Join Date: Oct 2006
Location: nassau county, ny
Age: 46
Posts: 1,857
Likes: 0
Received 1 Like
on
1 Post
did anyone have trouble with the #74 cubby light? i just changed mine to the blue LED bulb over the weekend. it didn't fit as snug as the OEM bulb, and i had to take a few minutes to get the socket back into the housing and twist. i think the bulb from superbright is just a tad too long, but it's in there now.
i also took the time to change the front driver/passenger door bulbs to blue also. i think the only other thing i may do is the ambient lighting under the dash.
i also took the time to change the front driver/passenger door bulbs to blue also. i think the only other thing i may do is the ambient lighting under the dash.
07-07-2008, 11:50 AM
#434
Originally Posted by xjohnkdoex
did anyone have trouble with the #74 cubby light? i just changed mine to the blue LED bulb over the weekend. it didn't fit as snug as the OEM bulb, and i had to take a few minutes to get the socket back into the housing and twist. i think the bulb from superbright is just a tad too long, but it's in there now.
i also took the time to change the front driver/passenger door bulbs to blue also. i think the only other thing i may do is the ambient lighting under the dash.
i also took the time to change the front driver/passenger door bulbs to blue also. i think the only other thing i may do is the ambient lighting under the dash.
https://acurazine.com/forums/showthread.php?t=39262
I used a regular #74 (nonled) bulb from autolumination, and it looks closer to stock. It was a tight fit, and I almost felt that the glass was going to break...but the look is subtle like the stock incandescent bulb. I tried three replacement #74 bulbs (2 were led's) and all of them were a bit wider and longer than the stock bulb.
07-07-2008, 12:02 PM
#435
CL9 ABP
iTrader: (1)
Join Date: Feb 2005
Location: Commack, Long Island -> Queens NY
Age: 37
Posts: 4,528
Received 245 Likes
on
112 Posts
Yea the leds don't fit but you just rig it up that it sits in the socket it works.
The footwell lights i got leds from superbrights and used t-taps on the cubby light.
The footwell lights i got leds from superbrights and used t-taps on the cubby light.
07-10-2008, 10:44 AM
#438
2008 Acura TSX
Originally Posted by xjohnkdoex
did anyone have trouble with the #74 cubby light? i just changed mine to the blue LED bulb over the weekend. it didn't fit as snug as the OEM bulb, and i had to take a few minutes to get the socket back into the housing and twist. i think the bulb from superbright is just a tad too long, but it's in there now.
i also took the time to change the front driver/passenger door bulbs to blue also. i think the only other thing i may do is the ambient lighting under the dash.
i also took the time to change the front driver/passenger door bulbs to blue also. i think the only other thing i may do is the ambient lighting under the dash.
07-10-2008, 11:08 AM
#439
where is my garage?!
iTrader: (2)
Join Date: Oct 2006
Location: nassau county, ny
Age: 46
Posts: 1,857
Likes: 0
Received 1 Like
on
1 Post
yeah. i think it's a whole bunch of things. the direction of the light, the brightness, and then slit where the light comes through. all of those things combined really limit the light in there.
eh. no big deal. it's not like i could see much in there even with the stock bulb.
eh. no big deal. it's not like i could see much in there even with the stock bulb.
07-10-2008, 11:24 AM
#440
CL9 ABP
iTrader: (1)
Join Date: Feb 2005
Location: Commack, Long Island -> Queens NY
Age: 37
Posts: 4,528
Received 245 Likes
on
112 Posts
I agree john my gear shift light went out so i stuck a same 74 bulb in it. its right now wedged in and hope it stays but it beats having a dark gear shift at night.