Strut Bar DIY
#41
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,641
Received 2,329 Likes
on
1,309 Posts
Ok I'm going to order an RL bar and see if it fits, if not, a Legend bar. Also going to get the sway bar meant for a Legend GS sedan.
#44
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,641
Received 2,329 Likes
on
1,309 Posts
Originally Posted by 2.5tl inspire
would this fit the 2.5 cuz im not sure which car ken got
#48
Acura Vet
Join Date: Oct 2003
Location: Snellville, GA
Age: 46
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KaMLuNg
legend or RL bar??? they are relatively affordable if u want to buy it brand new from the dealership...
Well, what's a 2.5er to do?
#49
Instructor
Join Date: Oct 2006
Location: Lawrenceville, GA
Age: 33
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KaMLuNg
my back hurts... but its in..
its really not even that hard to put in.. there are stock holes for the bolts.. covered with a black sticker... the hardest part was mounting the bracket to the firewall.. had to mark and drill and not much space to work back there.. P.I.T.A... still have to play with it more tomm, the bar is resting on a sensor at the back top of the engine and it rattles at low RPMS.. i will have to relocate it.. anyone tell me what that sensor is??? top middle right in the back... don't think u can see it in my picks..
its really not even that hard to put in.. there are stock holes for the bolts.. covered with a black sticker... the hardest part was mounting the bracket to the firewall.. had to mark and drill and not much space to work back there.. P.I.T.A... still have to play with it more tomm, the bar is resting on a sensor at the back top of the engine and it rattles at low RPMS.. i will have to relocate it.. anyone tell me what that sensor is??? top middle right in the back... don't think u can see it in my picks..
#54
Originally Posted by dreamweaver883
where coudl i get that intake at?? and the strut bar?
#55
Originally Posted by KaMLuNg
my back hurts... but its in..
its really not even that hard to put in.. there are stock holes for the bolts.. covered with a black sticker... the hardest part was mounting the bracket to the firewall.. had to mark and drill and not much space to work back there.. P.I.T.A... still have to play with it more tomm, the bar is resting on a sensor at the back top of the engine and it rattles at low RPMS.. i will have to relocate it.. anyone tell me what that sensor is??? top middle right in the back... don't think u can see it in my picks..
its really not even that hard to put in.. there are stock holes for the bolts.. covered with a black sticker... the hardest part was mounting the bracket to the firewall.. had to mark and drill and not much space to work back there.. P.I.T.A... still have to play with it more tomm, the bar is resting on a sensor at the back top of the engine and it rattles at low RPMS.. i will have to relocate it.. anyone tell me what that sensor is??? top middle right in the back... don't think u can see it in my picks..
#56
Originally Posted by KaMLuNg
that intake i custom made from 3" mandrel bent tube that i ordered from JC Whitney... and the strut bar i got off a wrecked Legend for $20... check the junk yards... but u can even get the strut bar brand new from acura.. it is only 50$ brand new...
would this short ram be good for an 96 acura tl?
#57
大日本帝国
Originally Posted by reaper0206
http://www.andysautosport.com/acura/...p00027475.html
would this short ram be good for an 96 acura tl?
would this short ram be good for an 96 acura tl?
~Cheers~
#59
a lifelong mechanic commented when i mentioned my interest in the secret weapon. he opined it would throw of the fuel-to-air ratio. (using more gas in the process). makes sense right? not to mention that if the headers and exhaust are not upgraded at the same time, it/the air actually leads to somewhat of a bottleneck on the way out. any thoughts? (for this reason he recommended to settle for a K and N)
also, Kamlung, whats that revolver looking thing on your battery?
also, Kamlung, whats that revolver looking thing on your battery?
#60
大日本帝国
^ The K&N would also throw it off because of more flow. It's nothing the ECU can't handle, and the added exhaust leaving through the stock system equals more torque.
The disc is part of a grounding kit, based off the HKS Circle Earth.
~Cheers~
The disc is part of a grounding kit, based off the HKS Circle Earth.
~Cheers~
#65
Khmer Pride
#67
#69
Khmer Pride
#70
#74
i think the second pic gives a better angle because you can see the screws... if you look at the plate that the sensor is mounted onto, you will see 4 nuts and bolts... the thicker plate in front and the top two holes is stock OEM where the sensor bolted into... so if you can imagine the sensor bolted into that location, it would sit higher and on top of the metal plate above where i cut the notch out...
so what i did was cut a notch into the oem plate so that the sensor can be moved down... but if you look at the shape of the OEM plate, there is nothing to then bolt the sensor into because it is empty... so we cut a piece of sheet metal (and also a notch into this sheet metal) and screwed the sheet metal into the oem plate at the original top holes... what the sheet metal is doing is extending beyond the oem plate where it is empty so you have a place to screw the sensor into... so the bottom two bolts is the sensor screwed into the sheet metal...
i will take more pics this weekend of the back side of the sensor... it can help a bit more...
#76