First Gen TL ( UA-1,2) Kit
#4
The grill looks pretty cool, It just looks like it comes to a point in the middle.
I think the front is a little too wild for our car..
the sides look alright(just cut the front high piece off)...
The back is alright also (IMO the Skipper looks better)
I almost forgot about the wing...I like it..it looks better than the value..
I think the front is a little too wild for our car..
the sides look alright(just cut the front high piece off)...
The back is alright also (IMO the Skipper looks better)
I almost forgot about the wing...I like it..it looks better than the value..
#7
Three Wheelin'
Join Date: Nov 2000
Location: Bay Area
Age: 44
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
i don't like the grille at all. it doesn't really flow with the rest of the car cause of the point. the front spoiler is crazy though, pretty aggressive looking. at first glace i couldn't even tell it was a TL. must be the eyelids too. the sideskirts looks fine, might look pretty nice with the skipper kit. the rear is alright. i don't like the wing though. just some thoughts. but heck if the price is right, you never know, i might just change my opinions
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Trending Topics
#11
Three Wheelin'
Join Date: Feb 2001
Location: Toms River
Age: 40
Posts: 1,525
Likes: 0
Received 0 Likes
on
0 Posts
wooooooooooowwwwwwwwwwwww i likes alot i didnt like the skipper kit that much anyway
btw . could you teach me to read japaneese so i can find some of this stuff
btw . could you teach me to read japaneese so i can find some of this stuff
#33
Ex-Mod
Any more pics of the grill? I'm looking to buy a nice grill. I'm getting bored of my mesh. I was leaning towards the stock Inspire grill but maybe this one looks nicer. Its hard to tell in that pic.
BTW, ValueTL, remember when I asked you about those folding mirror harnesses? Is it possible to buy just the plug that goes into the folding mirror switch and getting some kind of wiring diagram so I can wire these up? I just got the mirrors on Tuesday and I can't wait to install them. PLEEZ let me know.
BTW, ValueTL, remember when I asked you about those folding mirror harnesses? Is it possible to buy just the plug that goes into the folding mirror switch and getting some kind of wiring diagram so I can wire these up? I just got the mirrors on Tuesday and I can't wait to install them. PLEEZ let me know.
#39
Burning Brakes
Thread Starter
Join Date: Apr 2000
Location: Honolulu
Posts: 1,164
Likes: 0
Received 0 Likes
on
0 Posts
962.5tl: I dug up some 19"wheels for you to think about and emailed you. Let me know what you think. If you need more let me know.
96TL: Do you have the plugs for the 4 wires and 2 wire harness from the mirrors?? Doesn't look like you can buy plugs seperate only harness.
Your switch is located in the dash correct. I'm worried about getting you a harness because it is going to be setup for the switch on the right hand side drivers location. I think the door harness should be OK though.
96TL: Do you have the plugs for the 4 wires and 2 wire harness from the mirrors?? Doesn't look like you can buy plugs seperate only harness.
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
#40
Ex-Mod
The mirrors have 2 plugs each. One is for the glass motor and the other is for the folding mirror motor. I plan on cutting the folding mirror motor plugs and soldering wires to them. The folding mirror motors only have 3 wires each its not a big deal to run my own wires. I would really like to get the plug but if I have to buy the whole harness then forget it. I can probably open it up and solder my own connections. The switch for the dash has 10 pins. 6 pins are for the folding mirror motors. I think I know what the rest do. 1 is probably ignition, 1 is power, 1 is ground, and the other for illumination. I just don’t know what pin does what though. ![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
Is there anyway to figure out what the pins do? Like a diagram or something?
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
Is there anyway to figure out what the pins do? Like a diagram or something?