Anyone have their cars on a dyno? If so post your results

Mine:

202 hp (at the wheels)
177 tq (at wheels)

adjusting for about 18% driveline loss (due to AT transmission)

240ish HP at the crank
210 ft pounds of torque

 

I'm too stock to care

 

I plan on adding an intake and maybe a voltage regulator but thats it. All I want is better gas mileage, not speed. lol.

 

Well if you want that.. keep the stock wheels, get some non-sporty tires and keep the PSI at 36 front and 33 rear.

You'll see well over 24 mpg on the freeway

 

What are the dyno numbers for a totally stock engine?

 

Hmm on a stock 3.2

Probably around 166 whp and 172 ft pounds torque


Stock 2.5

Probably around 150 whp and 140 ft pounds of torque


Basically I've been able to make a bit more torque (especially in the lower rev ranges) and 40 extra horses

 

I didn't take it to the dyno yet, but I ran a 13.8 on the track! I have a T3/T4 gerret turbo-charger, but that was at 7psi which is 10 lbs of boost.

 

Nice! My best is 14.6 but obviously no turbo. Good times!

 

Hehehe, with something around 30/30PSI, on the highway, I got 28.x mpg out of my 2.5. I can get 24 in town if I drive right

 

Nice!

I'm doing 26 mpg or so if I'm gentle, 24 if I'm a bit of a leadfoot

 

your post is worthless w/o pics