Anyone use these with the OEM wheels? If so any size suggestions? I'm keeping the stock wheels for a year or so and keeping a low profile on mods from my other household unit, you know the deal. Stock is ok for now but I think the rears in at least .6 in to close and the fronts .3, they need to be more flush.

 

For one, you are going to need longer studs. Are the Ichiba hub-centric? You would want the spacer to hang on the stock hub and the wheel to hang on the spacer rather than having the the wheels hang on studs alone.

 

They are. They come with the studs as well.

 

It would probably look nicer if the wheels stuck out another 15mm or so. The stock setup makes the wheels look too sunken in.

 

Will putting 12mm spacers on the front and 20mm on the rear mess up the ride or the tire wear? I know some people stagger wheel width and that would basicl give the same affect, I just didn't know with these how may affect any balance with the vehicle.

 

Found this thread with 20mm Ichiba and stock wheel pics: https://acurazine.com/forums/1g-rdx-tires-wheels-suspension-362/spacers-684593/