http://www.power-division.com/produc...cat=385&page=1

Could these be adapted to our K23A1's?

Has anyone tried to get custom cams ground?

With the flash pro available, was wondering what people did....

 

From:Dustin Spencer (dustin@briancrower.com)Sent:Tue 1/07/14 5:01 PMTo: the_wrench116@hotmail.com

It’s about 65K to do the tooling to make the cam core so we just have to justify the demand before committing introducing a new cam line.

Thank you,

Dustin Spencer
-------
Brian Crower, Inc.
161 So Marshall Ave
El Cajon CA 92020
P: 619-749-9018 - ext 101
F: 619-749-9128
www.runbc.com




From: joshua fletcher [mailto:the_wrench116@hotmail.com]
Sent: Monday, January 06, 2014 1:50 PM
To: Dustin Spencer
Subject: RE: K23


ok that sounds good. what kind of interest would it take to make a production run at this? albeit a small run but a run none the less.


From: dustin@briancrower.com
To: the_wrench116@hotmail.com
Subject: RE: K23
Date: Mon, 6 Jan 2014 13:45:28 -0800
Joshua,
Unfortunately we do not have any cams available but we can regrind your factory cams for $495 and 2 week lead time.

Thank you,

Dustin Spencer
-------
Brian Crower, Inc.
161 So Marshall Ave
El Cajon CA 92020
P: 619-749-9018 - ext 101
F: 619-749-9128
www.runbc.com




From: joshua fletcher [mailto:the_wrench116@hotmail.com]
Sent: Thursday, January 02, 2014 10:26 PM
To: info@briancrower.com
Subject: K23



Sent from Windows Mail

hello my name is joshua fletcher and I am the proud owner of an 08 Acura RDX Tech with SHawd. I have a majority of the equipment available for it from the aftermarket and am interested in what is next. I was hoping you would be willing to develop a set of cams for our under appreciated platform. thanks for your time sincerely Sgt fletcher

 

anyone know if the cams on a 07-09 are the same on the 10-12.. i have the specs for the 10-12s.. just curious

 

B series cams will Not work in anything other than a b series. I'm not 100% certain but I don't think k20a3 cams would even work. They both share the crappy vtec.

 

Just look up the acura part number

 

For 2010,
Intake cam for us is part #14110-RWC-A00
Exahust cam for us is part #14120-RWC-A00

It's about $700+ for new ones to get reground I guess...
My concern is, once you get the new ones reground, how much tuning would be need for it to idle correctly?