ATLP Exhaust Sys!
#1
ATLP Exhaust Sys!
Just got off the phone with Mike at AcuraTLParts and he said that they are gathering names for people interested in their CAT back exhaust system. They had discontinued production on it but it seems that people have been calling in about it, thus the FINAL production run should start some time in the future.
Down Pipe; Apparently they did have a prototype made of this but the chap that was developing it left the company and the proto part with him!
However Mike says that if ATLP can get a list of at least ten(10) names then they will make the downpipe on a partial deposit basis.
You can contact Mike at 818 746 6997 or mike@acuratlparts.com
Contact him and put in your request.
Down Pipe; Apparently they did have a prototype made of this but the chap that was developing it left the company and the proto part with him!
However Mike says that if ATLP can get a list of at least ten(10) names then they will make the downpipe on a partial deposit basis.
You can contact Mike at 818 746 6997 or mike@acuratlparts.com
Contact him and put in your request.
#5
Mike Email me Today.
We are actually gathering interest for another batch. This is a discontinued item, but because of the interest in the last 2 weeks, we can offer this, probably, for one last final run.
If you are interested in an exhaust for the RDX, this would probably be the time. All we are requiring at the moment is the deposit of $200, and the remainder of the balance will be due when we are mid-production. I estimate that time being 1-2 months, which is just based on the remainder of people interested in an exhaust.
I've also attached the graphs. Please note that it's not only increased as far as peak power, but also has a consistent increase mid-range and starting low-end as well. It will give it more "pep" all around driving, especially driving around town.
Let me know if you are interested and I can e-mail you a Google checkout link for the deposit.
Thanks,
Michael Yu
I'm going to put $200.00 deposit.
We are actually gathering interest for another batch. This is a discontinued item, but because of the interest in the last 2 weeks, we can offer this, probably, for one last final run.
If you are interested in an exhaust for the RDX, this would probably be the time. All we are requiring at the moment is the deposit of $200, and the remainder of the balance will be due when we are mid-production. I estimate that time being 1-2 months, which is just based on the remainder of people interested in an exhaust.
I've also attached the graphs. Please note that it's not only increased as far as peak power, but also has a consistent increase mid-range and starting low-end as well. It will give it more "pep" all around driving, especially driving around town.
Let me know if you are interested and I can e-mail you a Google checkout link for the deposit.
Thanks,
Michael Yu
I'm going to put $200.00 deposit.
#6
Mike Email me Today.
We are actually gathering interest for another batch. This is a discontinued item, but because of the interest in the last 2 weeks, we can offer this, probably, for one last final run.
If you are interested in an exhaust for the RDX, this would probably be the time. All we are requiring at the moment is the deposit of $200, and the remainder of the balance will be due when we are mid-production. I estimate that time being 1-2 months, which is just based on the remainder of people interested in an exhaust.
I've also attached the graphs. Please note that it's not only increased as far as peak power, but also has a consistent increase mid-range and starting low-end as well. It will give it more "pep" all around driving, especially driving around town.
Let me know if you are interested and I can e-mail you a Google checkout link for the deposit.
Thanks,
Michael Yu
I'm going to put $200.00 deposit.
We are actually gathering interest for another batch. This is a discontinued item, but because of the interest in the last 2 weeks, we can offer this, probably, for one last final run.
If you are interested in an exhaust for the RDX, this would probably be the time. All we are requiring at the moment is the deposit of $200, and the remainder of the balance will be due when we are mid-production. I estimate that time being 1-2 months, which is just based on the remainder of people interested in an exhaust.
I've also attached the graphs. Please note that it's not only increased as far as peak power, but also has a consistent increase mid-range and starting low-end as well. It will give it more "pep" all around driving, especially driving around town.
Let me know if you are interested and I can e-mail you a Google checkout link for the deposit.
Thanks,
Michael Yu
I'm going to put $200.00 deposit.
Trending Topics
#8
#11
Just got off the phone talking to mike. he said that guy took the down pipe with him.
He said that he put down pipe on his car.
he got new job and can't locate him.
Mike willing to make the down pipe him self again but no time frame when.
Plus he already got 4 people waiting for 6 more to start working on cat back exhaust system.
You guys better hurry if you want the cat back system.
He said that he put down pipe on his car.
he got new job and can't locate him.
Mike willing to make the down pipe him self again but no time frame when.
Plus he already got 4 people waiting for 6 more to start working on cat back exhaust system.
You guys better hurry if you want the cat back system.
#19
I've been e-mailing him, got a good response he said he'd e-mail me something so I could put down the $200 and I never heard back from him. I want the ATLP!!! Should I call in or am I added to the list by being on here?
#20
Mike Email me Today.
We are actually gathering interest for another batch. This is a discontinued item, but because of the interest in the last 2 weeks, we can offer this, probably, for one last final run.
If you are interested in an exhaust for the RDX, this would probably be the time. All we are requiring at the moment is the deposit of $200, and the remainder of the balance will be due when we are mid-production. I estimate that time being 1-2 months, which is just based on the remainder of people interested in an exhaust.
I've also attached the graphs. Please note that it's not only increased as far as peak power, but also has a consistent increase mid-range and starting low-end as well. It will give it more "pep" all around driving, especially driving around town.
Let me know if you are interested and I can e-mail you a Google checkout link for the deposit.
Thanks,
Michael Yu
I'm going to put $200.00 deposit.
We are actually gathering interest for another batch. This is a discontinued item, but because of the interest in the last 2 weeks, we can offer this, probably, for one last final run.
If you are interested in an exhaust for the RDX, this would probably be the time. All we are requiring at the moment is the deposit of $200, and the remainder of the balance will be due when we are mid-production. I estimate that time being 1-2 months, which is just based on the remainder of people interested in an exhaust.
I've also attached the graphs. Please note that it's not only increased as far as peak power, but also has a consistent increase mid-range and starting low-end as well. It will give it more "pep" all around driving, especially driving around town.
Let me know if you are interested and I can e-mail you a Google checkout link for the deposit.
Thanks,
Michael Yu
I'm going to put $200.00 deposit.
#22
You can contact Mike at 818 746 6997 or mike@acuratlparts.com
#26
im dissapointed too, but i'm actually quite impressed with the customized atlp exhaust Mike did for me, it sounds way better, the tone is nice and deep in compararisant to the original one I had before. A+ job, it actually sounds pretty loud when you drive 4000rpm and up and when the turbo kicks in the intake with exhaust sounds very very aggressive :P
#29
yes ive been told its very easy. mike was even saying for me to do it myself but i'm better off seeing a local guy just to be safe. Maybe this will help: http://www.vimeo.com/3261154
#30
#31
Christmas! This is what I told my wife and she was cool with it. Not to mention I bought her a $1,300 Yorky puppy last October and an eastern Caribean cruise for Christmas...so this year she can budge some Do the deposit! Mike at ATLP is VERY helpful, cool & honest...not just trying to make sales but trying to provide the best product for your car & needs.
#36
The pricing for the exhaust system is actually $925, not $950.
Happy holidays!
#38
I believe it went smaller than 2" at some points, as it was a varying ID size. Exhaust cutout's are cool, but I also think their kinda tacky and un-classy. Something I wouldn't mind putting on my track car, but on my daily, I'll pass.
#39
The size of the downpipe (stock) is around 2". It houses the primary cat.
You cant use the cutout without throwing a check light on this vehicle.
Do a search on deleting the cats all info has been covered plenty!
You cant use the cutout without throwing a check light on this vehicle.
Do a search on deleting the cats all info has been covered plenty!