Bobbling noises!

Thread Tools
 
Search this Thread
 
Old 02-24-2011, 11:04 AM
  #1  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
Bobbling noises!

Just replaced all 4 struts and expected a beautiful ride and the noises which I thought were the struts to dissapear but now the noises are still there. When I hit bumps it sounds like something is severely loose in the front and back. My front suspension is all new with the exception of the inner tie rods so I can't understand what the noise could be. Any suggestions would be appreciated.
The following users liked this post:
bamaborn74 (02-13-2014)
Old 02-24-2011, 07:54 PM
  #2  
Pro
 
97'CL2.2's Avatar
 
Join Date: Jun 2009
Location: Chagrin Falls, OH
Age: 38
Posts: 504
Received 36 Likes on 26 Posts
sounds like ur gona hafta get under there w a prybar and see whats loose...probably a bad bushing...inspect em all
The following users liked this post:
bamaborn74 (02-13-2014)
Old 02-24-2011, 09:35 PM
  #3  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
If they're bad, I'll notice it for sure if I pry at it? I was thinking control arms of some sort, or sway bars cuz they look old as hell.
The following users liked this post:
bamaborn74 (02-13-2014)
Old 02-25-2011, 08:29 AM
  #4  
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
 
97BlackAckCL's Avatar
 
Join Date: Jan 2005
Location: ShitsBurgh
Age: 43
Posts: 92,204
Received 4,464 Likes on 3,058 Posts
Have you replaced the ball joints and/or bushings?
The following users liked this post:
bamaborn74 (02-13-2014)
Old 02-25-2011, 09:04 AM
  #5  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
The front upper and lower ball joints I replaced and the stabilizer bushings as well. That's it for bushings though. Just wanna figure it out and replace, because it's very frustrating to hit a bump and hear this all around the car. I'm gonna do upper control arm and rearward and forward control arms in the rear of the car within a few weeks so I'll keep you posted.
The following users liked this post:
bamaborn74 (02-13-2014)
Old 02-25-2011, 12:06 PM
  #6  
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
 
97BlackAckCL's Avatar
 
Join Date: Jan 2005
Location: ShitsBurgh
Age: 43
Posts: 92,204
Received 4,464 Likes on 3,058 Posts
I had this issue when my shock tower bushings went, I replaced all my bushings with PolyUrethayne
The following users liked this post:
bamaborn74 (02-13-2014)
Old 02-25-2011, 02:05 PM
  #7  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
<Noob lol I put all new strut mounting kits when I did the struts, is that what your talking about? Or is there something different that you mean? Thanks man!
The following users liked this post:
bamaborn74 (02-13-2014)
Old 03-08-2011, 03:57 PM
  #8  
Advanced
 
cwindsor's Avatar
 
Join Date: Feb 2010
Posts: 68
Likes: 0
Received 1 Like on 1 Post
Originally Posted by 97BlackAckCL
I had this issue when my shock tower bushings went, I replaced all my bushings with PolyUrethayne

Where did you get these?
The following users liked this post:
bamaborn74 (02-13-2014)
Old 04-18-2011, 07:07 PM
  #9  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
Update! Replaced my front swaybar bushings(the middle two) and the bobbles in the front are gone. Yay!!!!!!!! On to the rear as that's been worse from the start. Just ordered the two middle bushings for the rear swaybar today from Acura and already have the outers from rockauto.com. Think I'm gonna pull the whole bar off and sand it down as it looks rusted and ancient.
The following users liked this post:
bamaborn74 (02-13-2014)
Old 04-18-2011, 07:53 PM
  #10  
10th Gear
 
soloed's Avatar
 
Join Date: Apr 2011
Age: 37
Posts: 10
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by timeizmoney22
Update! Replaced my front swaybar bushings(the middle two) and the bobbles in the front are gone. Yay!!!!!!!! On to the rear as that's been worse from the start. Just ordered the two middle bushings for the rear swaybar today from Acura and already have the outers from rockauto.com. Think I'm gonna pull the whole bar off and sand it down as it looks rusted and ancient.
you should check out the poly bushing sway bars from st suspension much better than stock :0
The following users liked this post:
bamaborn74 (02-13-2014)
Old 04-18-2011, 07:55 PM
  #11  
10th Gear
 
soloed's Avatar
 
Join Date: Apr 2011
Age: 37
Posts: 10
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by cwindsor
Where did you get these?
if you want the ploy bushings all around order them from energy suspension..94-97 accord master set..will fit our cars
The following users liked this post:
bamaborn74 (02-13-2014)
Old 04-18-2011, 08:19 PM
  #12  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
At the moment, just trying to get her riding smooth on a budget. For the 4 sway bar bushings, it cost me like $19 and probably another $30 for the front links and bushings. Can't cough up $120 +shipping at the moment. What is included in that kit? Pretty much every bushing for the suspension?
The following users liked this post:
bamaborn74 (02-13-2014)
Old 04-18-2011, 09:05 PM
  #13  
10th Gear
 
soloed's Avatar
 
Join Date: Apr 2011
Age: 37
Posts: 10
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by cwindsor
Where did you get these?
Originally Posted by timeizmoney22
At the moment, just trying to get her riding smooth on a budget. For the 4 sway bar bushings, it cost me like $19 and probably another $30 for the front links and bushings. Can't cough up $120 +shipping at the moment. What is included in that kit? Pretty much every bushing for the suspension?
includes everything..worth the buy
The following users liked this post:
bamaborn74 (02-13-2014)
Old 04-20-2011, 10:59 PM
  #14  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
Finished the rear swaybar bushings today and it sounds even better. The back is tighter feeling although there is still some clunk in the back right, but less since I replaced the 4 swaybar bushings!
The following users liked this post:
bamaborn74 (02-13-2014)
Old 07-01-2013, 09:28 AM
  #15  
Racer
Thread Starter
 
timeizmoney22's Avatar
 
Join Date: May 2010
Location: Hartford,Ct
Age: 42
Posts: 440
Received 32 Likes on 32 Posts
Older thread but ended up being the rear right trailing arm. One of the 2k out of the arm. smaller bushings wal
The following users liked this post:
bamaborn74 (02-13-2014)
Old 07-03-2013, 01:41 PM
  #16  
MMkay.
iTrader: (2)
 
Project_CLean's Avatar
 
Join Date: Jun 2009
Location: Boston,MA
Age: 32
Posts: 1,403
Received 188 Likes on 154 Posts
Good deal.
The following 2 users liked this post by Project_CLean:
bamaborn74 (02-13-2014), timeizmoney22 (07-03-2013)
Old 02-13-2014, 08:21 AM
  #17  
10th Gear
 
bamaborn74's Avatar
 
Join Date: Feb 2014
Posts: 12
Received 1 Like on 1 Post
Thumbs up

GREAT thread! I have a 1997 CL 3.0 and it sounds like I have turkeys tied up in my trunk!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
SexyRL
4G TL Problems & Fixes
6
08-19-2016 10:03 PM
xsilverhawkx
2G TL Problems & Fixes
4
10-05-2015 11:00 AM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM



Quick Reply: Bobbling noises!



All times are GMT -5. The time now is 10:22 AM.