New first gen CL. Suggestions!?!?!?
#121
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Now we're talking
#123
Instructor
Thread Starter
Well i traded my old XXR's with the tires + $200 for these
The old tires had camber wear on both sides so i needed new ones
The wheels came with Some brand new Achilles ATR's (Which if anyone is wondering, are AMAZING for the price) so I pretty much paid for tires i was going to get anyways, and the wheels were free.
#126
SANJOCL
Well i traded my old XXR's with the tires + $200 for these
The old tires had camber wear on both sides so i needed new ones
The wheels came with Some brand new Achilles ATR's (Which if anyone is wondering, are AMAZING for the price) so I pretty much paid for tires i was going to get anyways, and the wheels were free.
The old tires had camber wear on both sides so i needed new ones
The wheels came with Some brand new Achilles ATR's (Which if anyone is wondering, are AMAZING for the price) so I pretty much paid for tires i was going to get anyways, and the wheels were free.
The following users liked this post:
97BlackAckCL (10-09-2013)
#128
Moderator
iTrader: (3)
#131
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Lookin good man
The following users liked this post:
97BlackAckCL (10-15-2013)
#134
Moderator
iTrader: (3)
Damn I love this CL
Moar pics!
Moar pics!
#135
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
#136
Instructor
Thread Starter
This is a horrible pic of my interior. I have 2 JP neck pads, JP Fusa, and an NRG wheel, quick release and slim hub. oh yeah and a Rockford Fosgate 12 in the trunk.
And a couple more shots of the exterior
And a couple more shots of the exterior
The following users liked this post:
97BlackAckCL (10-17-2013)
#138
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Love the stance
#140
Instructor
Thread Starter
The following users liked this post:
97BlackAckCL (10-24-2013)
#141
Instructor
Thread Starter
#143
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
The following users liked this post:
HeartlessMonsta (12-04-2013)
#148
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
sick stance
#149
2600lb CL
iTrader: (2)
How do the wheels sit in comparison to the body line of the car? Do the wheels stick out ay from the body of the car and where the wheel well area is?
Here is a picture for reference in regards to what I'm referring to. This was with a 17x8 in wheel with a +25 offset.
Here is a picture for reference in regards to what I'm referring to. This was with a 17x8 in wheel with a +25 offset.
Last edited by 97BlackAckCL; 12-27-2013 at 12:21 PM.
The following users liked this post:
97BlackAckCL (12-17-2013)
#151
Instructor
Thread Starter
How do the wheels sit in comparison to the body line of the car? Do the wheels stick out ay from the body of the car and where the wheel well area is?
Here is a picture for reference in regards to what I'm referring to. This was with a 17x8 in wheel with a +25 offset.
[URL=http://s71.photobucket.com/user/j35j32/media/Work005.jpg.html][IMG]
Here is a picture for reference in regards to what I'm referring to. This was with a 17x8 in wheel with a +25 offset.
[URL=http://s71.photobucket.com/user/j35j32/media/Work005.jpg.html][IMG]
#152
2600lb CL
iTrader: (2)
I was curious about your specs because I plan to go 9.5" wide, but have been undecided with the offset to chose. I'm undecided atm because even though the current setup creates a wider stance for greater stability, IF I were to go lower with the offset as you have to compensate for the additional width, I'm uncertain if the change in the scrub radius would offset the additional stance by more than what its worth. I only have one shot at getting this right before ordering the new wheels. And atm I'm still considering keeping the same offset.
#153
Instructor
Thread Starter
I'm completely lost as to how a wider rim with a lower offset would sit flush with the fenders compared to my wheel specs. Per calculations, yours should stick out more.
I was curious about your specs because I plan to go 9.5" wide, but have been undecided with the offset to chose. I'm undecided atm because even though the current setup creates a wider stance for greater stability, IF I were to go lower with the offset as you have to compensate for the additional width, I'm uncertain if the change in the scrub radius would offset the additional stance by more than what its worth. I only have one shot at getting this right before ordering the new wheels. And atm I'm still considering keeping the same offset.
I was curious about your specs because I plan to go 9.5" wide, but have been undecided with the offset to chose. I'm undecided atm because even though the current setup creates a wider stance for greater stability, IF I were to go lower with the offset as you have to compensate for the additional width, I'm uncertain if the change in the scrub radius would offset the additional stance by more than what its worth. I only have one shot at getting this right before ordering the new wheels. And atm I'm still considering keeping the same offset.
Front
Rear (Excuse my finger lol)
all are on 205/40r17
The following users liked this post:
HeartlessMonsta (12-23-2013)
The following users liked this post:
97BlackAckCL (02-26-2014)
#159
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Love it, I've been toying with the idea of getting an NRG wheel for quite a while, do you have the quick release, or just the regular hub?
#160
SANJOCL
damn that wheel is sexy. how much did the hub and the wheel cost you and whered you pick it up from. was thinking of doin one of those but i dont like the idea of losing an air bag. lol what if you need it. seems kinda weird that the passenger would have one but not the dude driving the car haha..scared me a little