Will not fit our 3.0? What the F*%@
#1
aLL* sTaR
Thread Starter
Join Date: Apr 2002
Location: OrAnGe StAtE
Age: 50
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Will not fit our 3.0? What the F*%@
I'm sure this has probably been asked before. Who would be interested in a Comptech's Supercharger? Mike B says that it would not fit our 3.0 engines due to that is based on 96-97 Accord and that there is no demand on this kit from the 3.0 CL camp.
The engine bay is similar to the 98 ACCORD more than the 97 ACCORD. This kit just hit the streets. Could we show Comptech that we are interested. Go to www.comptechusa.com web forum and let them know. Power is in numbers
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#3
i think ross' supercharger is comptech from the accord v6. i dont know if he had it custom fit or if it was direct bolt on but i do know that he blew his tranny on one of his first drives with it and is now getting his tranny rebuilt by a guy with a 5-6 sec vette (i think thats right...correct me if im wrong)
#6
Pimpin with style
Join Date: Mar 2002
Location: Jax, Fl
Age: 43
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
I had thought it didnt work out and he sent it back or is tryin something else, I think it hurt something in his car, tranny maybe, guess he'll have to let us know
#7
A-CL Post Whore w/N2O
Originally posted by moforose3.0
Didnt something happen to it?
Didnt something happen to it?
Trending Topics
#8
aLL* sTaR
Thread Starter
Join Date: Apr 2002
Location: OrAnGe StAtE
Age: 50
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Well, I hope Ross reads this thread and give us some updates on what he did exactly, what happened to his tranny and foremost was it worth trying. I hope everything is ok with his ride.
#9
I've been emailing them (CT) for a years asking the same question. If they don't release an official kit for the 3.0CL, then I am probably just gonna get the one for the 3.0 Accord. Ross has shown that it is possible to fit it, the customized difference appears to be the IceBox Intake which may not fit our bay correctly. From the accordv6.com forum, looks like the SC will be running 4.5psi of boost to prevent overwhelming their tranny. If you guys beef up the tranny, you can probably get a smaller pulley and run a higher boost.
#10
aLL* sTaR
Thread Starter
Join Date: Apr 2002
Location: OrAnGe StAtE
Age: 50
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Comptech has got to be dumb!
There is potential of more cutomers buying their supercharger if they included it us in this forum. I'm pretty sure at least 200 potential buyers! WTF are they thinking, is not like they have to redo the whole supercharger! Maybe like you said is the ICE BOX that needs to be adjusted
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
#11
Same diff with AEM....why make a CAI and market for the 98-00 accord but not the 3.0 CL's. All they would have to do is move a mount slightly...Thing is it costs a lot for these companies to change even the slightest thing...but I am with you all when I say comptech just doesnt know how much potential us CL'ers have. I asked them about making sways for us before but mike just refused saying that there would be not market for them and that they would lose too much money.
This after selling headers for 1000+
![Roll Eyes](https://acurazine.com/forums/images/smilies/rolleyes.gif)
#13
i like chicken
Join Date: Mar 2001
Location: MobileWest Headquarters
Posts: 1,226
Likes: 0
Received 0 Likes
on
0 Posts
nothing was wrong with the sc, but i dont i have time to rebuild the tranny like i want so it is sent back. blew 2nd gear up and replaced the whole tranny with a new one.
by next summer i will have a twin turbo in my cl. i am builing the piping for it now.
by next summer i will have a twin turbo in my cl. i am builing the piping for it now.
#14
aLL* sTaR
Thread Starter
Join Date: Apr 2002
Location: OrAnGe StAtE
Age: 50
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RMSTOICO: Good luck with your turbo build up
but I prefer a Supercharger on my automatic, just my 2 cents. Anyways we should keep bugging Mike at Comptech and show him that we are potentail buyers! More power to 1st Gen. CLs where the J30 was born!
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#15
Originally posted by rmstoico
nothing was wrong with the sc, but i dont i have time to rebuild the tranny like i want so it is sent back. blew 2nd gear up and replaced the whole tranny with a new one.
by next summer i will have a twin turbo in my cl. i am builing the piping for it now.
nothing was wrong with the sc, but i dont i have time to rebuild the tranny like i want so it is sent back. blew 2nd gear up and replaced the whole tranny with a new one.
by next summer i will have a twin turbo in my cl. i am builing the piping for it now.
#17
You Fawkin Kiddin Me!
Join Date: Jul 2001
Location: Westchester, NY
Age: 43
Posts: 4,501
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by tw1112
Same diff with AEM....why make a CAI and market for the 98-00 accord but not the 3.0 CL's. All they would have to do is move a mount slightly...Thing is it costs a lot for these companies to change even the slightest thing...but I am with you all when I say comptech just doesnt know how much potential us CL'ers have. I asked them about making sways for us before but mike just refused saying that there would be not market for them and that they would lose too much money.
This after selling headers for 1000+
Same diff with AEM....why make a CAI and market for the 98-00 accord but not the 3.0 CL's. All they would have to do is move a mount slightly...Thing is it costs a lot for these companies to change even the slightest thing...but I am with you all when I say comptech just doesnt know how much potential us CL'ers have. I asked them about making sways for us before but mike just refused saying that there would be not market for them and that they would lose too much money.
![Roll Eyes](https://acurazine.com/forums/images/smilies/rolleyes.gif)
1. we do not have very popular cars that are seen as "hot imports" YET that is!
2. to change a mount location =
a new mold > new tooling > more materials > more labor > alot of $$$$ > not a large market to sell and make $$$ in!!!!
#18
Originally posted by Casper98CL
an honest and simple answer....
1. we do not have very popular cars that are seen as "hot imports" YET that is!
2. to change a mount location =
a new mold > new tooling > more materials > more labor > alot of $$$$ > not a large market to sell and make $$$ in!!!!
an honest and simple answer....
1. we do not have very popular cars that are seen as "hot imports" YET that is!
2. to change a mount location =
a new mold > new tooling > more materials > more labor > alot of $$$$ > not a large market to sell and make $$$ in!!!!
#19
i like chicken
Join Date: Mar 2001
Location: MobileWest Headquarters
Posts: 1,226
Likes: 0
Received 0 Likes
on
0 Posts
since when does the 98+ accord intake not fit the cl? mine fit perfectly, so did my injen intake. they even used different mounts between them but both lined up perfectly.
i am that damn good or what?
i am that damn good or what?
#20
Originally posted by rmstoico
since when does the 98+ accord intake not fit the cl? mine fit perfectly, so did my injen intake. they even used different mounts between them but both lined up perfectly.
i am that damn good or what?
since when does the 98+ accord intake not fit the cl? mine fit perfectly, so did my injen intake. they even used different mounts between them but both lined up perfectly.
i am that damn good or what?
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
#21
i like chicken
Join Date: Mar 2001
Location: MobileWest Headquarters
Posts: 1,226
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by tw1112
Actually a lot of people had them fit perfectly...just not me
hehe I guess you guys are just that damn good! Mine line up to the hole that is closest to the engine block, but that hole isn't threaded...
Actually a lot of people had them fit perfectly...just not me
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
take a toothpick and stick it in the hole. as you are holding the toothpick in the hole (against the side of the hole) spin the rubber mount into the hole. the toothpick will make the hole smaller plus it is soft wood and will thread. then break it off towards the end and you wont even see it.
good trick when threaded holes are bigger than the screw. good luck!
#22
Originally posted by rmstoico
here is a little trick i learned over the years.
take a toothpick and stick it in the hole. as you are holding the toothpick in the hole (against the side of the hole) spin the rubber mount into the hole. the toothpick will make the hole smaller plus it is soft wood and will thread. then break it off towards the end and you wont even see it.
good trick when threaded holes are bigger than the screw. good luck!
here is a little trick i learned over the years.
take a toothpick and stick it in the hole. as you are holding the toothpick in the hole (against the side of the hole) spin the rubber mount into the hole. the toothpick will make the hole smaller plus it is soft wood and will thread. then break it off towards the end and you wont even see it.
good trick when threaded holes are bigger than the screw. good luck!
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#23
aLL* sTaR
Thread Starter
Join Date: Apr 2002
Location: OrAnGe StAtE
Age: 50
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
I guess nobody else is interested on the Comptech supercharger since only 30clstyle and my self posted on Comptech website
Anyhow thanks for posting 30clstyle
I guess now I see that there is no demand from the CL camp
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
#24
A-CL Post Whore w/N2O
Originally posted by VeilSideCL
I guess nobody else is interested on the Comptech supercharger since only 30clstyle and my self posted on Comptech website
Anyhow thanks for posting 30clstyle
I guess now I see that there is no demand from the CL camp
I guess nobody else is interested on the Comptech supercharger since only 30clstyle and my self posted on Comptech website
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
#25
Hey,
I posted there too, I was the one who had to correct "what's his name's" response who said our engines were more similar to the 95-97 Accord V6. Which he bluntly responded with, "We have no plans to fit the SC to the 97-99 CL".
Well, like I said Ross has done it and shown it is possible. The only thing I question is that the Icebox is a box intake with an intake pipe that runs down into the fender. Not sure if the box & pipe will line up correctly in the CL. I'm sure regular pipe-only CAI fit the CL as Ross has mentioned. I'm probably gonna get the SC around June-July and hope it all works out.
I posted there too, I was the one who had to correct "what's his name's" response who said our engines were more similar to the 95-97 Accord V6. Which he bluntly responded with, "We have no plans to fit the SC to the 97-99 CL".
Well, like I said Ross has done it and shown it is possible. The only thing I question is that the Icebox is a box intake with an intake pipe that runs down into the fender. Not sure if the box & pipe will line up correctly in the CL. I'm sure regular pipe-only CAI fit the CL as Ross has mentioned. I'm probably gonna get the SC around June-July and hope it all works out.
#26
aLL* sTaR
Thread Starter
Join Date: Apr 2002
Location: OrAnGe StAtE
Age: 50
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cldriver
Hey,
I posted there too, I was the one who had to correct "what's his name's" response who said our engines were more similar to the 95-97 Accord V6. Which he bluntly responded with, "We have no plans to fit the SC to the 97-99 CL".
Well, like I said Ross has done it and shown it is possible. The only thing I question is that the Icebox is a box intake with an intake pipe that runs down into the fender. Not sure if the box & pipe will line up correctly in the CL. I'm sure regular pipe-only CAI fit the CL as Ross has mentioned. I'm probably gonna get the SC around June-July and hope it all works out.
Hey,
I posted there too, I was the one who had to correct "what's his name's" response who said our engines were more similar to the 95-97 Accord V6. Which he bluntly responded with, "We have no plans to fit the SC to the 97-99 CL".
Well, like I said Ross has done it and shown it is possible. The only thing I question is that the Icebox is a box intake with an intake pipe that runs down into the fender. Not sure if the box & pipe will line up correctly in the CL. I'm sure regular pipe-only CAI fit the CL as Ross has mentioned. I'm probably gonna get the SC around June-July and hope it all works out.
![Sleep](https://acurazine.com/forums/images/smilies/sleep.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Puke](https://acurazine.com/forums/images/smilies/puke.gif)
#28
I've got a link to a page that gives a little info on the on the SC that's being used. I'll post it later when I get home. I too, read that post on the SC not fitting the 97-99 3.0 cL. I think it's a crock of SHIT!! We need to call and email comptech with our demands! More and more people are buying cl(s) now a days.
Ross, how hard was it to fit the SC in the 3.0cL engine bay? If I'm not mistaken that SC can be mounted 8-10 different ways? Did you take any pics of the install? What came with the SC that comptech gave you?
Ross, how hard was it to fit the SC in the 3.0cL engine bay? If I'm not mistaken that SC can be mounted 8-10 different ways? Did you take any pics of the install? What came with the SC that comptech gave you?
#30
100% Dominicano
Join Date: Apr 2002
Location: Connecticut
Age: 41
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by CL SLeePeR
Ross, how hard was it to fit the SC in the 3.0cL engine bay? If I'm not mistaken that SC can be mounted 8-10 different ways? Did you take any pics of the install? What came with the SC that comptech gave you?
Ross, how hard was it to fit the SC in the 3.0cL engine bay? If I'm not mistaken that SC can be mounted 8-10 different ways? Did you take any pics of the install? What came with the SC that comptech gave you?
#35
teh Senior Instigator
Join Date: Sep 2000
Location: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
Age: 42
Posts: 44,090
Received 957 Likes
on
328 Posts
Originally posted by KitsJAG5254
hey guys.. how about Jackson Racing Superchargers??? Are they better or at least the same quality as Comptechs??
hey guys.. how about Jackson Racing Superchargers??? Are they better or at least the same quality as Comptechs??
not any better, they are good quality, unfortunately they don't make one
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Thread
Thread Starter
Forum
Replies
Last Post
emailnatec
5G TLX Tires, Wheels & Suspension
29
09-28-2018 04:27 PM
xsilverhawkx
2G TL Problems & Fixes
5
09-28-2015 06:51 PM