Need your opinion on my grille guys...
#1
Need your opinion on my grille guys...
Well let's see here, I got a 97 grille and what I want to do is cut/sand off the center portion of it so that all i have is a big curvy shaped hole in the center and throughout the grille, then I'm going to trace a template of gutter guard or something and cut it out, then quicksteel or JBweld it to the back of the plastic grille... then put it on my car..
im gonna paint the gutter guard gloss black as well. you guys think this will turn out good? trying to get some opinions, seeing how once i start, i cant go back unless i buy a new one.
i wanna cut that red part out (kinda hard to draw the line at this angle) but i think u guys get the idea.... sooo
or ?
im gonna paint the gutter guard gloss black as well. you guys think this will turn out good? trying to get some opinions, seeing how once i start, i cant go back unless i buy a new one.
i wanna cut that red part out (kinda hard to draw the line at this angle) but i think u guys get the idea.... sooo
or ?
#3
so you want it like how ding did it on his car? i think he had the guy put some fiberglass and stuff to fill it in and he said it was a bitch to do and that the gut would never make a grill like that again
#6
#7
yuuuuuup, thats exactly how imma do it, cept maybe leave the chrome or sand it paint gloss black... why did he use fiberglass? to fill in the 3 gaps?
so far, i sanded everything and cut out the center-piece... imma sand it more, paint it black, and get the gutter guard on ASAP, ill have pics 2morrow morning
so far, i sanded everything and cut out the center-piece... imma sand it more, paint it black, and get the gutter guard on ASAP, ill have pics 2morrow morning
Trending Topics
#11
Originally Posted by Palayah8ta
Jerk!!!!!!! Damnit i couldve funded your project mr. impatient!!!
See how u theres that sexy bar coming off the sides of the acura symbol. O well.. *sniff*
See how u theres that sexy bar coming off the sides of the acura symbol. O well.. *sniff*
HOLY SHIT THAT IS AN UGLY ASS GRILLE!! jk, not that bad
damn though, 98 grilles look like they are definitely much easier to cut... i had to cut these thick parts on the side with a dremel and yea, it sucked. i think it would've been easier to cut those little bars.. u want me to do it fo rya? haha
#15
Originally Posted by DivineCL
I'll give you a whopping $10.00 plus my 98' front grill for your 97'?
Send me your paypal info. so we can proceed.
#20
yeah, 97 will have gaps at the 2 areas where the centerpiece meets with the sides... i'm going to fill it with some kind of plastic/putty material, let it dry, sand it even, then primer it flat black
the 98 grille is a good piece to do this project with
the 98 grille is a good piece to do this project with
#26
OKAY!!!!
got my grille done but gotta paint the back part of it black so that it doesn't show... that one part that holds up the stock grille sorta, yeah if you use gutter guard it shows... but i got pics of the grille on the floor
I also did my fogs... got them with some yellow H3 bulbs, check it out!
Started off with this:
Covered the gaps with Fast Steel...
Dremel sanded that shiet DOWN...
Grille before
Grille after
Grille on car (need to paint that center black) with my fogs...
Fog output with HID's! Sweet as hell in person...
don't flame on the grille yet.. it aint done, haha
got my grille done but gotta paint the back part of it black so that it doesn't show... that one part that holds up the stock grille sorta, yeah if you use gutter guard it shows... but i got pics of the grille on the floor
I also did my fogs... got them with some yellow H3 bulbs, check it out!
Started off with this:
Covered the gaps with Fast Steel...
Dremel sanded that shiet DOWN...
Grille before
Grille after
Grille on car (need to paint that center black) with my fogs...
Fog output with HID's! Sweet as hell in person...
don't flame on the grille yet.. it aint done, haha
#27
I don't see what all you guys have against the 98 grille. It looks way better than the 97 because, the 97 looks like Nissan, Ford, and Chevy grilles with the shinny bar across that black plastic crosshatch. I think the 98 grille looks more like the Lexus grille. Oh well, just my opinion. I'll be leaving my grille clean and in tact. Good luck with the project. Oh, I do like the mesh, but I don't think gutter gaurd is what you wanted. It would be more like the stuff on the front of a QuickSilver G5 Macintosh tower. Smaller holes. Gutter guard shows way too much of your radiator support.
I like the fogs though. those are nice.
I like the fogs though. those are nice.
#28
97silver2.2CL, you need to paint the radiator core support and hood latch assembly satin black - don't do gloss or flat - you need to hide what's behind the grill so it'll blend in. Good job on what you've done so far. I know you wanted to show pics with the lights on but post some pics with the grill on during the day (preferrably after you paint behind the grill).
By the way - I have a 97 grill that I'd be willing to trade for a 98 grill plus $. Any offers???
By the way - I have a 97 grill that I'd be willing to trade for a 98 grill plus $. Any offers???
#36
I know my opinion doesnt matter much, lol. But dont try to do this with the 99' style grill. I tried to do the same thing except with fiberglass and real mesh and its still undone. It was a pain to cut all the bars out and the fiberglassing wasne too bad, but attaching the mesh and everything is just alot of trouble. So ive been grilless for a couple months now lol, just b/c im too lazy.
But very good job i like the grill, fogs, and clear corners
But very good job i like the grill, fogs, and clear corners
#37
Originally Posted by BlueCLRycR
hey its his car it should be want he wants it to be. not what everybody else already has. but you know what they say; opinions are like assholes, everybody has one.
fuxk that w/ those stupid opinions..
btw, good job 97silver2.2CL