I'm trying to install an upper rear strut bar and can only get one of the two bolts of the top of the strut tower. I can't get to the bolt in the back. WTF? Anyone know how to tackle that one? Don't tell me I have to take out the back seat...

 

Just take the top part of the seat out. It's easy. Two or three 10mm or 12mm bolts at the bottom, then lift it out. It will be much easier.

 

u should be able to do it with a ratchet and a 2.5 inch or 3 inch extension

just climb in the trunk with a flashlight

 

HeavyP: Been there done that. Not quite enuf room. Got the front bolts, just can't get to the back ones. thanks.

CiLver2.3: Thanks - I'll try that in the morning.

 

Hey man, I'm intersted in checkin out your ride and I'm in roseville to! PM me!

Brian

 

I got mine off without removing any part of the seat. Ratchet/extensions/swivel. Plus, I was in the trunk & I'm 6'/250#.
I would advise stretching first....nothing worse than getting a cramp while you're in there - trust me!

 

Everyone: thanks for the tips. I got the bar in but I had to pop the back seat out to get to those two rear bolts. Once the seat back was out, getting to the back bolts was a snap.
Bartman: I'm only 5'7" and it wasn't comfortable for me either. I don't have any swivels - I see a tool purchase coming.