I did a search but it is not responding so I got a question.... Is there is exhaust system for the CL 2.2??? If not alot can I buy the accord 97 exhaust system and put it on my CL 2.2 without any mods to install it?????

 

no, it will require a little bending for it to fit. otherwise it uses the same hangers.

 

If I where you I'd get a custom exhaust made. I got one made and it was cheaper and sounds really good. And it added some pick up.

 

I didn't have to bend anything to get my DC Sports cat-back to fit.

 

which one do you have?

some of the cat-back clear the suspension in the back in a different manner, or so i have heard some people complain.

i had my greddy re-piped so i didnt have any problems.

 

It is just the DC Sports cat-back system, they only have that and the TCS system.


pic 1

pic 2

 

if it works it works

 

i like dc, not too ricey, but the tip sticks out too far from the muffler. I am a bigger fan on the apexi's

 

Do apexi make any for the cl 2.2? Also if I have to do the bending how much will I have to do? alot? Last question everyone who has a exhaust system for there cl 2.2 can you tell me what you did to make it fit or which exhaust system will fit without bending or doing the custom piping.

 

Bosal/Brospeed 97-99 CL Coupe 2.2, 2.3 112-301 Stainless



Heres what it looks like on mine.

 

hks super dragger. no probs cept i had to use new bolts to hold the mid and rear section the ones provided just bent in half. hahah

 

Custom CAT back piping and 3A muffler. Low resonance, kinda loud and ballzy, but clean. < $300 cut, bent and installed. IT's not a greedy, brospeed, etc, but it left me with some cash for other items

 

What'd ya pay for your dc?

 

I can't remember exactly how much it was. The cheapest place I could find at the time was autodynamic.com, it was about $500.

 

Hey, do you like your DC? How would you describe the sound? I think I'm going to get it for my 98 2.3...what exact Accord model did you get... 97 ex 4cyl? Thanks dude, I agree you get what you pay for...and DC has a great name and quality to back it up, I had Tanabe on my Civic and it never failed or sounded bad!!!!

 

Have any of you with brand name cat back systems ever had just muffler shop bent piping and a generic muffler before getting the brand name system? If so, is there a big difference? Or if anyone has an idea or input, I'm wondering if I got a cat-back system how much I would gain...

 

has anyone heard more than one type of exhaust on a cl? just wondering cus i wanted do some comparison on how throaty/load each was

 

I have wav files of my NA setup

Bosal header, racing cat, and cat back.

Send me an email and I'll reply with them (too big for my website)

niedejb@insightbb.com

 

you've got mail, can you "hooka" brotha up?

 

[QUOTE]Originally posted by niedejb
[B]Bosal/Brospeed 97-99 CL Coupe 2.2, 2.3 112-301 Stainless



I couldnt find any pricing on this system. How much is it for everything in the pic?

 

HKS supper dragger is very deep. 2.5" piping. kills some low end but there was little bump in power at higher rpms

 

Google.com

$487.50

Just found out summit racing has it too.

In the catalog that came today:

BOS 112-301 1994-96 Honda Accord DX/LX/EX $489.95

Wrong years but right part number.

 

Ractive universl ss.



http://photos.yahoo.com/bc/o1fastsum...c=ph%26.view=t

 

Greetings,

I recently had a Bosal Header and Catback upgrade on my 97 CL2.2. Both of the sections are advertised in the Accord section as well as the CL section. However, there are problems with the header's down tubes interfering with the block's oil pan mounting surface. The welds around the manifold mounting flange are not properly filleted. The combination of these two things are resulting in leaks. Aside from the noise emitting from under the hood the exhaust sounds pretty good. I'm expecting to hear from a Bosal rep on Monday. Hopefully they will make it right. I'll follow up and let you know how it goes. Check them out at Bosal Performance.

Jules¯±¯

 

I'd be interested in hearing about fittment issues with a catback system.. Im looking at maybe doing that soon to my CL.

 

Bosal is making it right. They are drop shipping a new header to my shop.

 

what the hell is this?

noobs need to stop bumping old threads