I was wondering if anyone would be interested in seeing a FAQ for the 1st generation CL's? I see that there is a wealth of information running around, and it would be nice to have it all in one concise document. Of course, I would be the one volunteering to write the FAQ. If anyone is interested, let me know...

 

I am interested to see 1.
Maybe sometimes I would help.

------------------
Black '97 Acura 3.0CL Premium (Leather,WoodTrim,SunRoof Visor,Spoiler,Gold,Fogs,Air Intake,Clear Bumper Lights,Gold/Wood Pedals)

 

I'd love to see one.

------------------
97 2.2CL Premium - Black
Cleared bumpers, int / ext lights
'87 CRX Si Shift Knob =>

 

Sounds good especially since the board seems to be dominated by 2nd generation owners.

Thanks,



------------------
Tom T
'97 5-speed Red CL

 

i would like to see a faq also. thans man!

------------------
'97 red CL 3.0
nose mask
venom 400
cai is next!

 

I think it's a great idea, let's get it going.

------------------
97 CL 2.2

 

I'll help. I'm getting a Helms for the car, both service manual and electrical manuel. Should be here next week.

------------------
1997 Acura 2.2 CL (5spd)
rubber tires, windshield wipers, headlights, horn, steering wheel, BRAKE PEDAL, clutch, brake pads, driver seat, passenger seat, back seat, front windshield, rear windshield (with defroster), lumbar support, cruise control, intermitent wiper control, sun roof (tinted), engine, pistons (only 4), emergency brake handle, trunk w/ tools, spare tire

 

Great to see so much interest. I will start writing a preliminary version with what I think a 1st gen CL FAQ should contain. I'm quite new to the CL so I for one do not know everything, so it'll definately be written by more than 1 person. If anyone has any ideas, please feel free to send me mail at: guyfoster@hotmail.com

Thanks,

MontrealCL

 

Sounds good!

 

I've got the 2.2 down to a science. Engine, I'm not super great with. I do my own mods, but as for maintenance... I'm still in the process of getting really greasy. Interior, I can just about take everything apart.

------------------
1997 Acura 2.2 CL (5spd)
rubber tires, windshield wipers, headlights, horn, steering wheel, BRAKE PEDAL, clutch, brake pads, driver seat, passenger seat, back seat, front windshield, rear windshield (with defroster), lumbar support, cruise control, intermitent wiper control, sun roof (tinted), engine, pistons (only 4), emergency brake handle, trunk w/ tools, spare tire

 

How do you make an aftermarket CD player fit without a kit. I want to keep it stock looking.


------------------
97 CL 2.2

 

[/b][/QUOTE]
How do you make an aftermarket CD player fit without a kit. I want to keep it stock looking.
[/B][/QUOTE]

What I did was make a bracket, very much like the stock L bracket with the original two bolts holding the stock unit and tray in place. Folded small gauge sheet metal and drilled the holes where the stock ones were. It worked perfect. I did use an aftermarket wiring harness so if I sell, I can put back the stock unit.



------------------
'97 2.2CL (5 spd)cleared bumbers, pedals, superwhite gauges, stock chromed rims (wanted to keep the original CL feel)Sony ES CDX-M750 head unit,Nokia hands free kit,35% on the windows..
http://24.48.88.82/acura.htm

 

That's a great idea. Montreal, once you have a preliminary one completed, post it as a new topic on here. I can then archive it to the FAQ section where it will stay!!



------------------
1998 Iced Blue CL 3.0 ** Some mods, but who cares, I want a Type-S!!

Moderator - 1st Gen Forum

Email: juniorbean@acura-cl.com