[pixpix] aem v2 intake & Brembo rotors..
#1
[pixpix] aem v2 intake & Brembo rotors..
I installed these yesterday..
and.. here's some pix!
1. aem v2 intake
http://f2.pg.photos.yahoo.com/ph/hsw...5138/my_photos
my CL is now crrrrrrrrrrruuuuuuuuuuuueeeeeelllllllling!! j/k
-VXCL! where did you put that thing in the first pix of mine?
2. brembo rotors w/ axxis brakes
http://f2.pg.photos.yahoo.com/ph/hsw...5138/my_photos
and.. as you can see from the brembo rotors..
there are NO HOLES(two screws) for front rotors.. but there are right two holes for rear ones..
I don't know if jerry sent me wrong one, or anyone who got from him has same problems..
well.. i hope there will be no prolem..
yep.. this is for today..
I'll install the dual custom mufflers and the gauges later this week.
and.. here's some pix!
1. aem v2 intake
http://f2.pg.photos.yahoo.com/ph/hsw...5138/my_photos
my CL is now crrrrrrrrrrruuuuuuuuuuuueeeeeelllllllling!! j/k
-VXCL! where did you put that thing in the first pix of mine?
2. brembo rotors w/ axxis brakes
http://f2.pg.photos.yahoo.com/ph/hsw...5138/my_photos
and.. as you can see from the brembo rotors..
there are NO HOLES(two screws) for front rotors.. but there are right two holes for rear ones..
I don't know if jerry sent me wrong one, or anyone who got from him has same problems..
well.. i hope there will be no prolem..
yep.. this is for today..
I'll install the dual custom mufflers and the gauges later this week.
#3
ok im an intake install newbie:
what is that thing going into the intake? it's a small pipe looking thing with a rubber cover thing
what is that? do all intakes need that? cuz im gonna install my friend's AEM intake for his integra (short ram), and i wanna know what the heck that small thing is
also looking nice!
what is that thing going into the intake? it's a small pipe looking thing with a rubber cover thing
what is that? do all intakes need that? cuz im gonna install my friend's AEM intake for his integra (short ram), and i wanna know what the heck that small thing is
also looking nice!
#5
I ripped all that shit out. Since you have a 98+ you may have slightly different things to be more environmently friendly.
I sure wish I had rotor over hub setup on the front. fuckin honda bastards.
I sure wish I had rotor over hub setup on the front. fuckin honda bastards.
#6
Originally posted by dragon084
lookingreat.
what rims are u getting again?
and where did u get them breaks, im lookin for some on my 3.0
lookingreat.
what rims are u getting again?
and where did u get them breaks, im lookin for some on my 3.0
2. I got sets of brembo rotors and brakes pads from "red99cl2.3"
I meant.. he hook me up w/ Jerry.
#7
Originally posted by KLepTo
How much did they charge you for installing the rotors? also do you have any farther shots of the rotors with the wheels on? I wanna see how noticable they are
How much did they charge you for installing the rotors? also do you have any farther shots of the rotors with the wheels on? I wanna see how noticable they are
2. I'll take some pix when I get car-washed. My rims are hella dirty now, so I don't wanna take any. lol
Trending Topics
#8
Originally posted by VXCL
I ripped all that shit out. Since you have a 98+ you may have slightly different things to be more environmently friendly.
I sure wish I had rotor over hub setup on the front. fuckin honda bastards.
I ripped all that shit out. Since you have a 98+ you may have slightly different things to be more environmently friendly.
I sure wish I had rotor over hub setup on the front. fuckin honda bastards.
#9
Originally posted by DanMan1464
ok im an intake install newbie:
what is that thing going into the intake? it's a small pipe looking thing with a rubber cover thing
what is that? do all intakes need that? cuz im gonna install my friend's AEM intake for his integra (short ram), and i wanna know what the heck that small thing is
also looking nice!
ok im an intake install newbie:
what is that thing going into the intake? it's a small pipe looking thing with a rubber cover thing
what is that? do all intakes need that? cuz im gonna install my friend's AEM intake for his integra (short ram), and i wanna know what the heck that small thing is
also looking nice!
just extention rubber pipe... and.. i didn't use all.. just cut some and used.. i think u only need less than 5"
#12
Originally posted by VXCL
I ripped all that shit out. Since you have a 98+ you may have slightly different things to be more environmently friendly.
I sure wish I had rotor over hub setup on the front. fuckin honda bastards.
I ripped all that shit out. Since you have a 98+ you may have slightly different things to be more environmently friendly.
I sure wish I had rotor over hub setup on the front. fuckin honda bastards.
#13
Originally posted by KLepTo
Ahh, i c you have a 97 as well. wait, how do our front rotors look like then compared to 98+?
Ahh, i c you have a 97 as well. wait, how do our front rotors look like then compared to 98+?
nippon follow the lines on that thing. i bet they go back to one line somewhere on the firewall. rip all that shit out. then attach the one line to the second hole in the v2 intake that you have open. if your not going to do that then at least cap that second hole
#14
Originally posted by v6foryou2envy
ehm.. those not real brembos.. they're drilled blank brembos.. I wanna see some 13 inch brembos with the big assed calipers.. stinker..
ehm.. those not real brembos.. they're drilled blank brembos.. I wanna see some 13 inch brembos with the big assed calipers.. stinker..
#15
Originally posted by KLepTo
only $65? hrmm maybe its because you have a 98, I have a 97 and heard that the install was gonna be soemthing like $200
only $65? hrmm maybe its because you have a 98, I have a 97 and heard that the install was gonna be soemthing like $200
#16
Originally posted by VXCL
nippon follow the lines on that thing. i bet they go back to one line somewhere on the firewall. rip all that shit out. then attach the one line to the second hole in the v2 intake that you have open. if your not going to do that then at least cap that second hole
nippon follow the lines on that thing. i bet they go back to one line somewhere on the firewall. rip all that shit out. then attach the one line to the second hole in the v2 intake that you have open. if your not going to do that then at least cap that second hole
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
lanechanger
Member Cars for Sale
4
10-13-2015 10:56 AM