Need help on my stance and wheel
#1
Advanced
Thread Starter
Need help on my stance and wheel
Hey guys, I know this may seem repetitive but I gotta ask because I haven't seen anyone ask about these exact dimensions yet.
Well anyways, I am going to buy the Chromium Black XXR 530's:
19 x 8.75 +15 in Front
19 x 10.75 +15 in Rear
I have purchased H&R Race Springs, and I want to do everything at once.
So here is my question...what tires do you guys think? I really want a beefy tire, I run 285/35/18 in front and 315/35/18 on my mustang in the rear with a 2.5" drop and rolled fenders. They are absolutely perfect. I would like to have the same type of scheme on my Type S. Can I run 265/35/19 in the front and 315/25/19 in the rear? I will roll my fenders completely as well on the Acura...
Let me know what you guys think, and please brutal honesty. I am not one of those pussies that gets butt hurt when someone is honest about their stupidity. I am not a foreign car guy so this is a different world to me.
Thanks for you guys help!
Josh
Well anyways, I am going to buy the Chromium Black XXR 530's:
19 x 8.75 +15 in Front
19 x 10.75 +15 in Rear
I have purchased H&R Race Springs, and I want to do everything at once.
So here is my question...what tires do you guys think? I really want a beefy tire, I run 285/35/18 in front and 315/35/18 on my mustang in the rear with a 2.5" drop and rolled fenders. They are absolutely perfect. I would like to have the same type of scheme on my Type S. Can I run 265/35/19 in the front and 315/25/19 in the rear? I will roll my fenders completely as well on the Acura...
Let me know what you guys think, and please brutal honesty. I am not one of those pussies that gets butt hurt when someone is honest about their stupidity. I am not a foreign car guy so this is a different world to me.
Thanks for you guys help!
Josh
#2
Pro
Have you looked thru the sticky at top of this page? New wheel/tire spec thread.
I would look thru the last 3 or 4 pages just to give you what people are running.
There is one guy running 275 rears and 265 fronts I think, but I could be wrong
But 315 rears never seen it! That is one big tire.
I would look thru the last 3 or 4 pages just to give you what people are running.
There is one guy running 275 rears and 265 fronts I think, but I could be wrong
But 315 rears never seen it! That is one big tire.
#5
Advanced
Thread Starter
#6
Moderator
iTrader: (3)
Josh, those wheel/tire specs are WAY too aggressive for the TL. Your fender is going to be sitting on top of the tire and you won't be able to move without damaging something.
You should ditch those springs and get a set of coilovers. That way you can adjust the ride height to accommodate the rubber instead of being stuck at one preset height.
You should ditch those springs and get a set of coilovers. That way you can adjust the ride height to accommodate the rubber instead of being stuck at one preset height.
#7
This is the second time I've seen those specs specified for being flush. Are you running this, or where did you find them? Does this mean that the rim will be flush with both the front and rear fenders?
I wonder if there are any pictures of this setup. I'd love to see what it looks like.
Here's the post I saw earlier.
https://acurazine.com/forums/showpos...08&postcount=6
I wonder if there are any pictures of this setup. I'd love to see what it looks like.
Here's the post I saw earlier.
https://acurazine.com/forums/showpos...08&postcount=6
Trending Topics
#8
Advanced
Thread Starter
Josh, those wheel/tire specs are WAY too aggressive for the TL. Your fender is going to be sitting on top of the tire and you won't be able to move without damaging something.
You should ditch those springs and get a set of coilovers. That way you can adjust the ride height to accommodate the rubber instead of being stuck at one preset height.
You should ditch those springs and get a set of coilovers. That way you can adjust the ride height to accommodate the rubber instead of being stuck at one preset height.
#9
Moderator
iTrader: (1)
This is the second time I've seen those specs specified for being flush. Are you running this, or where did you find them? Does this mean that the rim will be flush with both the front and rear fenders?
I wonder if there are any pictures of this setup. I'd love to see what it looks like.
Here's the post I saw earlier.
https://acurazine.com/forums/showpos...08&postcount=6
I wonder if there are any pictures of this setup. I'd love to see what it looks like.
Here's the post I saw earlier.
https://acurazine.com/forums/showpos...08&postcount=6
They are the perfect sized because it clears brembos WHILE being flush with fenders.
#10
The following 2 users liked this post by justnspace:
robocam (04-16-2014),
Undying Dreams (04-16-2014)
#12
Can't wait to see the results!
Here's a car with similar specs with 19s and slightly different tires (225/45R19) in the front.
https://acurazine.com/forums/showpos...&postcount=834
Here's a car with similar specs with 19s and slightly different tires (225/45R19) in the front.
https://acurazine.com/forums/showpos...&postcount=834
#13
Did you get your car back? =) If the spokes on my wheel stick out past the edge of the rim, should I still make the rim flush with the fenders or should I make the spokes flush with the fenders?
Thread
Thread Starter
Forum
Replies
Last Post
JByron
Car Parts for Sale
7
01-08-2016 09:49 PM