PoTMiLKz Progress Thread
#1
Moderator
Thread Starter
PoTMiLKz Progress Thread
I currently own a 2010 Acura TL FWD in Crystal Black Pearl
recently i have bought the full oem lip kit and is waiting to install in when weather is good
just a sneak peak of what i got in stored for this couple of months
19x10 19x8
recently i have bought the full oem lip kit and is waiting to install in when weather is good
just a sneak peak of what i got in stored for this couple of months
19x10 19x8
#2
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
You're going to be busy! Post pictures when everything is on.
2011 National AcuraZine Meet-Kansas City-June 12, 2011-Details Here!
.
2011 National AcuraZine Meet-Kansas City-June 12, 2011-Details Here!
.
#7
Moderator
Thread Starter
yup im aiming for the VIP look
those wheels are going to be a challenge.. considering they are 19x10 and i believe +29 offset if im correct.
im still waiting to purchase tein ss and camber kit for the car.. running low on funds..
those wheels are going to be a challenge.. considering they are 19x10 and i believe +29 offset if im correct.
im still waiting to purchase tein ss and camber kit for the car.. running low on funds..
Trending Topics
#13
Moderator
Thread Starter
Got the front lip on, here is the progress.
here is my own little mod on the rear reflectors (please dont jock me guys!) jk! lol
finished product
i also installed switchbacks for the front blinkers and led reverse light.
here is my own little mod on the rear reflectors (please dont jock me guys!) jk! lol
finished product
i also installed switchbacks for the front blinkers and led reverse light.
#16
Moderator
Thread Starter
it was a bitch to do since i did everything myself.
i did however messed up on one part. one of the rear clips came off the lip and now i gotta go run to get double sided tape to make sure it sticks.. theres a gap..
i did however messed up on one part. one of the rear clips came off the lip and now i gotta go run to get double sided tape to make sure it sticks.. theres a gap..
#28
#29
Moderator
Thread Starter
#31
How funny, i just opened up my tein ss after sitting in my closet for 3 months. I am doing the Install Tuesday, then EDFC is going in, then front and rear camber kits are getting installed at a shop.
#34
Moderator
Thread Starter
hey nexon, do me a favor, see if you can take some pics of the install. i believe the rear seats have to come out.. if you can do a diy of taking out the rear seats that would be great..
i would like to take apart my rear seats before i bring my car into shop to install... because you know.. i dont really trust them with taking care of my rear leather seats.. i.e. broken tabs and shit like that..
i would like to take apart my rear seats before i bring my car into shop to install... because you know.. i dont really trust them with taking care of my rear leather seats.. i.e. broken tabs and shit like that..
#35
I have car ADD
iTrader: (6)
^ the seats absolutely must come out, in order to change the suspensions
there are 2 plastic tabs on the bottom part of the seat, where it meets the carpet... you can use your fingers, or a pair of pliers to pull the tabs towards the front of the vehicle.. you will hear it "release". Remove the bottom half of the seat
then, there are 4 bolts you will see. remove them (i believe 10mm). Once they are off, now is the tricky part..... lift the bottom portion of the top half of the seat. Lift upwards,the tilts outwards... seat will come off its "hook"
there are 2 plastic tabs on the bottom part of the seat, where it meets the carpet... you can use your fingers, or a pair of pliers to pull the tabs towards the front of the vehicle.. you will hear it "release". Remove the bottom half of the seat
then, there are 4 bolts you will see. remove them (i believe 10mm). Once they are off, now is the tricky part..... lift the bottom portion of the top half of the seat. Lift upwards,the tilts outwards... seat will come off its "hook"
#37
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Dude, I really like what you did with the rear reflectors...can't wait to see the rest!
#39
Moderator
Thread Starter