Grilles, Grilles...and more Grilles!! Show/Give Ideas Here!
04-02-2008, 01:14 PM
#85
~Da Nocturnal Cheetah~
Thread Starter
Ok Titan...after I finished crying laffin' of course at that friggin avatar...but man, first you have to slow down and write out what you want to say carefully. Kind of hard to understand you the way you write.
DOn't take this the wrong way but...As for the grilles, WTF??
Who did that work for you and what kind of mesh are you using? It doesn't look like it fits at all, in a MAJOR way! Not touching the edges, uneven, and too many gaps playa. You need to go back and do that again dude. I would hold back on asking these guys if they want some of that til you get yours right playboy! Good luck. 
DOn't take this the wrong way but...As for the grilles, WTF??
Who did that work for you and what kind of mesh are you using? It doesn't look like it fits at all, in a MAJOR way! Not touching the edges, uneven, and too many gaps playa. You need to go back and do that again dude. I would hold back on asking these guys if they want some of that til you get yours right playboy! Good luck.
04-02-2008, 02:42 PM
#86
In Search Of Sunrise....
^^^ word.. that shits a hot mess! I feel bad for that car... ain't trying to hate son, but you killed it.
but ayy, if you feeling it, thats you..
but ayy, if you feeling it, thats you..
04-02-2008, 03:55 PM
#87
Cruisin'
Join Date: Mar 2008
Location: Fort Myers, FL
Age: 41
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
your right
i did it my self it was arush job my wife was having my dauter
and just didnt have time to finish thats why i ask u guys for feedback
and im new to this cumputer stuf sory for the mis spel
the mesh is ss dipd in crome the top plate is also ss no pic yet
give me ideas thanks
and just didnt have time to finish thats why i ask u guys for feedback
and im new to this cumputer stuf sory for the mis spel
the mesh is ss dipd in crome the top plate is also ss no pic yet
give me ideas thanks
04-03-2008, 12:20 PM
#89
Cruisin'
Join Date: Mar 2008
Location: Fort Myers, FL
Age: 41
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KSuchdeve
Am I the only one that thinks this guy just found these pics and is playing some sort of sick, sick joke?
Doing the grill while your wife was in labor?
Doing the grill while your wife was in labor?
so i just slapt it in
04-03-2008, 12:27 PM
#90
Originally Posted by titan tl
i did it my self it was arush job my wife was having my dauter
and just didnt have time to finish thats why i ask u guys for feedback
and im new to this cumputer stuf sory for the mis spel
the mesh is ss dipd in crome the top plate is also ss no pic yet
give me ideas thanks
and just didnt have time to finish thats why i ask u guys for feedback
and im new to this cumputer stuf sory for the mis spel
the mesh is ss dipd in crome the top plate is also ss no pic yet
give me ideas thanks
04-03-2008, 04:02 PM
#91
Cruisin'
Join Date: Mar 2008
Location: Fort Myers, FL
Age: 41
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lights
so you were doing your grill when your wife was giving birth??
i was just test fiting but never took them out to finish
so if eny body can be real i need som input on how to make it better
i could use the stok botom for trim or ss flat bar like everybody else that
makes grills.but i wanted to change it up and mak seamles but darksom is right is uneaven on the botom with no trim.
will finish this weekend & post mor picks .
04-03-2008, 04:22 PM
#92
Lol..so you got the call you were having a kid...so you put on ALL of the grills back on and THEN went to your wife? lol
Anyways..congrats on the daughter!
I think the grilles came out kind of eh because everything looks too plain. I left the horizontal bar in the middle of the lower grill. Like this:
Anyways..congrats on the daughter!
I think the grilles came out kind of eh because everything looks too plain. I left the horizontal bar in the middle of the lower grill. Like this:
04-05-2008, 08:24 PM
#94
Cruisin'
Join Date: Mar 2008
Location: Fort Myers, FL
Age: 41
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tlnewbie870
hey titan tl where can i get a grill like that...would look great with my rj body kit
wen i close on new house.contact @ titanmfginc@embarqmail.com
04-21-2008, 11:11 AM
#96
In Search Of Sunrise....
^^^ That actually looks pretty good! One of the better "mesh" grilles ive seen to date.
The only thing I dont like is the 2 wedges on the side where the T bar connected. If there was a way to smooth that out, then i think it would look REALLY good!
The only thing I dont like is the 2 wedges on the side where the T bar connected. If there was a way to smooth that out, then i think it would look REALLY good!
04-21-2008, 12:51 PM
#97
Night and Day
Originally Posted by TiggaMan909
^^^ That actually looks pretty good! One of the better "mesh" grilles ive seen to date.
The only thing I dont like is the 2 wedges on the side where the T bar connected. If there was a way to smooth that out, then i think it would look REALLY good!
The only thing I dont like is the 2 wedges on the side where the T bar connected. If there was a way to smooth that out, then i think it would look REALLY good!
i notice a lot of people on here without the wedges in their trim. how was this accomplished? are there aftermarket grille trims for this car?
04-28-2008, 03:25 PM
#102
Night and Day
Originally Posted by aSPECtL06
I really like gwai1o's grill. How would that look with the center bar with the Acura emblem on?
Originally Posted by titan tl
looks good just need the botom 
Justin-
05-02-2008, 05:24 PM
#103
Cruisin'
Join Date: Mar 2008
Location: Fort Myers, FL
Age: 41
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gwai1o
i have no idea. im still waiting for to previous owner to get the center bar to me..
yes. i know. i actually have to remove the grille and spray it because it rusts. i wasn't thinking about rust! d'oh!
Justin-
yes. i know. i actually have to remove the grille and spray it because it rusts. i wasn't thinking about rust! d'oh!
Justin-
or just go whith alum or ss.this one is alum if u need it i got it by the palet
o ya i got the hol stock grill to
its lighter to
05-03-2008, 09:59 AM
#107
~Da Nocturnal Cheetah~
Thread Starter
That doesn't look right, not at all. You should paint the grille, or use mesh that has a nicer look to it. That looks very cheesy on your car. Don't go cheap mesh on a nice car. It just ruins the whole look of the car. I can't believe that you can't see this. The grille looks very uneven in color and just doesn't look good at all. Keep working on it, you'll get it!
05-03-2008, 01:50 PM
#108
Cruisin'
Join Date: Mar 2008
Location: Fort Myers, FL
Age: 41
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by darksom1
That doesn't look right, not at all. You should paint the grille, or use mesh that has a nicer look to it. That looks very cheesy on your car. Don't go cheap mesh on a nice car. It just ruins the whole look of the car. I can't believe that you can't see this. The grille looks very uneven in color and just doesn't look good at all. Keep working on it, you'll get it!
If eny thing evry one on this form has cheap mesh!!It's a luxury car not a rice burner im trying to sho an easear way to do it why do you think no one makes grills for this car even after 4yrs.I have the idea but don't have the funds for a grill punch like all the big names.For the werk involved and doing it my self
I THANK IT'S PIMP NOT RACEY.Ya dig
05-03-2008, 09:49 PM
#112
~Da Nocturnal Cheetah~
Thread Starter
Originally Posted by titan tl
beuty is in the eye of the beholder besides its not cheap mesh its the same shit they use in all top line grills strut/lexani/cadilac/asanti exsetra..
If eny thing evry one on this form has cheap mesh!!It's a luxury car not a rice burner im trying to sho an easear way to do it why do you think no one makes grills for this car even after 4yrs.I have the idea but don't have the funds for a grill punch like all the big names.For the werk involved and doing it my self
I THANK IT'S PIMP NOT RACEY.Ya dig
If eny thing evry one on this form has cheap mesh!!It's a luxury car not a rice burner im trying to sho an easear way to do it why do you think no one makes grills for this car even after 4yrs.I have the idea but don't have the funds for a grill punch like all the big names.For the werk involved and doing it my self
I THANK IT'S PIMP NOT RACEY.Ya dig
05-04-2008, 09:48 AM
#115
Slow Paper> No Paper
Originally Posted by titan tl
beuty is in the eye of the beholder besides its not cheap mesh its the same shit they use in all top line grills strut/lexani/cadilac/asanti exsetra..
If eny thing evry one on this form has cheap mesh!!It's a luxury car not a rice burner im trying to sho an easear way to do it why do you think no one makes grills for this car even after 4yrs.I have the idea but don't have the funds for a grill punch like all the big names.For the werk involved and doing it my self
I THANK IT'S PIMP NOT RACEY.Ya dig
If eny thing evry one on this form has cheap mesh!!It's a luxury car not a rice burner im trying to sho an easear way to do it why do you think no one makes grills for this car even after 4yrs.I have the idea but don't have the funds for a grill punch like all the big names.For the werk involved and doing it my self
I THANK IT'S PIMP NOT RACEY.Ya dig
05-06-2008, 03:47 PM
#116
10th Gear
Join Date: May 2008
Age: 38
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Where Can I Get It???
Originally Posted by PPLAPW
where do u get those?
please let me know
thank you
09-14-2008, 10:08 AM
#117
Does anyone have this same setup with the trim unpainted? I'm afraid a painted trim will chip. I have an appointment at the body shop this weekend and I need to instruct them on how to paint the grille.
Looking for pics of a WDP with blacked out grille, with trim and emblem untouched. Anyone?
Thanks.
The following users liked this post:
Jp09 (06-13-2011)