AcuraZine - Acura Enthusiast Community
0 2021/01/31 16:55:12
Rivnuts attached this mount to the frame rail. Battery relocated to trunk to make this work. You could still find a way to mount battery near oem spot but i decided on rear right trunk area for battery.
Rivnuts attached this mount to the frame rail. Battery relocated to trunk to make this work. You could still find a way to mount battery near oem spot but i decided on rear right trunk area for battery.
0 2021/01/31 16:47:22
Innovative mount on the back. A few washers lined everything up square.
Innovative mount on the back. A few washers lined everything up square.
0 2021/01/31 16:46:26
Modified front mount. I cut that "ear" piece off my stock right side motor mount.
Modified front mount. I cut that "ear" piece off my stock right side motor mount.
0 2021/01/31 16:42:44
2 bolts lined up the other 2 were drilled and the whole center console was shimmed up an inch in the rear the clear it with the boot on otherwise moving side to side would bang the surrounding plastic.
2 bolts lined up the other 2 were drilled and the whole center console was shimmed up an inch in the rear the clear it with the boot on otherwise moving side to side would bang the surrounding plastic.
0 2021/01/31 16:37:11
Ill have to do something to the empty side.
Ill have to do something to the empty side.
0 2021/01/31 16:24:33
3" super50 Dual 2.5 out.
3" super50 Dual 2.5 out.
0 2021/01/31 16:23:41
0 2021/01/31 16:04:24
The front headers were hitting the subframe so trimmed a small tab off the 2nd layer and then made 2 small cuts heated and smashed in a small section. Weld the cuts after.
The front headers were hitting the subframe so trimmed a small tab off the 2nd layer and then made 2 small cuts heated and smashed in a small section. Weld the cuts after.
0 2021/01/31 15:43:45
Thats it now with decent clearance. Im not worried with the 95a mounts.
Thats it now with decent clearance. Im not worried with the 95a mounts.
0 2021/01/31 15:43:39
0 2021/01/31 15:43:32
0 2021/01/31 15:43:26
With the '05 TL wheels i need a 5mm spacer but if i put the spacer i dont think ill have enough hub left sticking out for the rim to grab. So i ordered 20mm hubcentric spacers (64.1mm)
With the '05 TL wheels i need a 5mm spacer but if i put the spacer i dont think ill have enough hub left sticking out for the rim to grab. So i ordered 20mm hubcentric spacers (64.1mm)
0 2020/12/12 08:55:55
Pad sticks out 3/16ths (ish) off the rotor. I am going to grind the pads on an angle to match the rotor so they dont start making noise.
Pad sticks out 3/16ths (ish) off the rotor. I am going to grind the pads on an angle to match the rotor so they dont start making noise.
0 2020/12/12 08:55:22
0 2020/12/02 14:07:27
0 2020/12/02 14:06:00
0 2020/11/29 07:18:12
0 2020/11/29 07:17:20
0 2020/11/22 06:27:42
Some progress. I decided to dig right in yesterday.
Some progress. I decided to dig right in yesterday.
0 2020/11/15 08:38:56
Some progress this weekend.
Some progress this weekend.
0 2020/11/15 08:32:39
0 2020/10/19 11:35:18
0 2020/10/19 11:33:59
Out from the bottom
Out from the bottom
0 2020/10/19 11:31:50
0 2020/10/07 09:26:25
0 2020/10/07 09:26:06
0 2020/10/07 09:23:39
Where does this wire go?! Lol
Where does this wire go?! Lol
0 2020/01/04 12:18:00
0 2019/06/30 12:28:47
0 2019/06/30 12:28:10
0 2019/06/30 12:25:22
0 2019/06/30 12:24:40
0 2018/04/12 02:56:55
3 valve cover bolt gromet things for spacers.
3 valve cover bolt gromet things for spacers.
0 2018/02/27 04:31:24
Small piece of center beam cut.
Small piece of center beam cut.
0 2018/02/27 04:31:12
0 2018/02/24 21:07:24
0 2018/02/21 19:03:55
tight parking in here but got it out and down.
tight parking in here but got it out and down.
0 2018/02/21 08:00:40
Couldnt waite lol. suprisingly there was enough room to lift AND take the motor out i was scared i was gonna have to drag the car back out a bit but with no front wheels that woulda sucked.
Couldnt waite lol. suprisingly there was enough room to lift AND take the motor out i was scared i was gonna have to drag the car back out a bit but with no front wheels that woulda sucked.
0 2018/02/21 08:00:21
This was not from my car but from the one i scrapped for parts. June 17th 2011 someone was in there. rebuilt maybe? hope so. This is the one going in the car as mine was doing the 2 - 3 fluckaround
This was not from my car but from the one i scrapped for parts. June 17th 2011 someone was in there. rebuilt maybe? hope so. This is the one going in the car as mine was doing the 2 - 3 fluckaround
0 2018/02/21 07:59:39