AcuraZine - Acura Enthusiast Community
0 2026/04/25 07:15:37
0 2026/04/25 07:15:15
0 2026/04/25 07:15:13
0 2026/01/16 13:15:08
0 2026/01/16 13:15:07
0 2026/01/16 13:15:05
0 2026/01/10 08:52:26
Amp location
Amp location
0 2026/01/01 11:08:38
Phantom Audio Amp
Phantom Audio Amp
0 2026/01/01 11:08:37
Audible Physics RAM 2SR center channel speaker upgrade
Audible Physics RAM 2SR center channel speaker upgrade
0 2026/01/01 11:08:31
Amp location
Amp location
0 2026/01/01 11:08:29
0 2025/11/16 13:42:05
0 2025/11/16 13:42:03
0 2025/11/16 13:42:01
0 2025/11/16 13:41:58
0 2025/11/16 13:41:55
0 2025/11/10 15:39:18
0 2025/11/10 15:39:16
0 2025/11/10 15:39:14
0 2024/12/01 15:30:24
0 2024/01/02 13:05:50
0 2024/01/02 13:05:47
The grill from the audible physics doesn't allow the speaker to sit as flush with the OEM cover. Though not an issue, just dont over tighten the screws!
The grill from the audible physics doesn't allow the speaker to sit as flush with the OEM cover. Though not an issue, just dont over tighten the screws!
0 2023/10/22 11:29:08
OEM tweeter and pillar - 3 small tabs hold it in place
OEM tweeter and pillar - 3 small tabs hold it in place
0 2023/10/22 11:29:02
OEM tweeter removed (right) next to Phantom Audio's Extendre tweeter (left)
OEM tweeter removed (right) next to Phantom Audio's Extendre tweeter (left)
0 2023/10/22 11:28:57
Not pictured here was before i sand papered the edges and covered it with harness tape.
Not pictured here was before i sand papered the edges and covered it with harness tape.
0 2023/10/22 11:28:51
Due to size and depth of the Phantom Audio tweeter, it requires trimming of the OEM plastic mount.
Due to size and depth of the Phantom Audio tweeter, it requires trimming of the OEM plastic mount.
0 2023/10/22 11:28:46
Capacitor soldered to my home made speaker harness
Capacitor soldered to my home made speaker harness
0 2023/10/22 11:28:42
Completed new tweeter connections
Completed new tweeter connections
0 2023/10/22 11:28:37
0 2023/10/22 11:28:31
Amp mods completed - from Jesse
Amp mods completed - from Jesse
0 2023/10/22 11:28:27
Center channel: Audible Physics (top), OEM (bottom) - from Jesse
Center channel: Audible Physics (top), OEM (bottom) - from Jesse
0 2023/10/22 11:28:20
Audible Physics integrated into OEM center channel bracket - from Jesse
Audible Physics integrated into OEM center channel bracket - from Jesse
0 2023/10/22 11:28:16
Anchor installed
Anchor installed
0 2023/01/27 13:37:45
Body panel reinstalled and collar installed
Body panel reinstalled and collar installed
0 2023/01/27 13:37:44
Rivet nut installed
Rivet nut installed
0 2023/01/27 13:37:43
Dorman rivet nut ready for torqueing. Wrench used to hold body panel out of the way
Dorman rivet nut ready for torqueing. Wrench used to hold body panel out of the way
0 2023/01/27 13:37:41
0 2023/01/27 13:37:40
Cargo net installed
Cargo net installed
0 2023/01/27 13:37:38
Step 11 - revised
Step 11 - revised
0 2023/01/27 13:32:39