AcuraZine - Acura Enthusiast Community
0 2020/10/19 11:33:59
0 2020/10/19 11:35:18
Some progress this weekend.
Some progress this weekend.
0 2020/11/15 08:32:39
Some progress. I decided to dig right in yesterday.
Some progress. I decided to dig right in yesterday.
0 2020/11/15 08:38:56
0 2020/11/22 06:27:42
0 2020/11/29 07:17:20
0 2020/11/29 07:18:12
0 2020/12/02 14:06:00
0 2020/12/02 14:07:27
Pad sticks out 3/16ths (ish) off the rotor. I am going to grind the pads on an angle to match the rotor so they dont start making noise.
Pad sticks out 3/16ths (ish) off the rotor. I am going to grind the pads on an angle to match the rotor so they dont start making noise.
0 2020/12/12 08:55:22
With the '05 TL wheels i need a 5mm spacer but if i put the spacer i dont think ill have enough hub left sticking out for the rim to grab. So i ordered 20mm hubcentric spacers (64.1mm)
With the '05 TL wheels i need a 5mm spacer but if i put the spacer i dont think ill have enough hub left sticking out for the rim to grab. So i ordered 20mm hubcentric spacers (64.1mm)
0 2020/12/12 08:55:55
0 2021/01/31 15:43:26
0 2021/01/31 15:43:32
Thats it now with decent clearance. Im not worried with the 95a mounts.
Thats it now with decent clearance. Im not worried with the 95a mounts.
0 2021/01/31 15:43:39
The front headers were hitting the subframe so trimmed a small tab off the 2nd layer and then made 2 small cuts heated and smashed in a small section. Weld the cuts after.
The front headers were hitting the subframe so trimmed a small tab off the 2nd layer and then made 2 small cuts heated and smashed in a small section. Weld the cuts after.
0 2021/01/31 15:43:45
0 2021/01/31 16:04:24
3" super50 Dual 2.5 out.
3" super50 Dual 2.5 out.
0 2021/01/31 16:23:41
Ill have to do something to the empty side.
Ill have to do something to the empty side.
0 2021/01/31 16:24:33
2 bolts lined up the other 2 were drilled and the whole center console was shimmed up an inch in the rear the clear it with the boot on otherwise moving side to side would bang the surrounding plastic.
2 bolts lined up the other 2 were drilled and the whole center console was shimmed up an inch in the rear the clear it with the boot on otherwise moving side to side would bang the surrounding plastic.
0 2021/01/31 16:37:11
Modified front mount. I cut that "ear" piece off my stock right side motor mount.
Modified front mount. I cut that "ear" piece off my stock right side motor mount.
0 2021/01/31 16:42:44
Innovative mount on the back. A few washers lined everything up square.
Innovative mount on the back. A few washers lined everything up square.
0 2021/01/31 16:46:26
Rivnuts attached this mount to the frame rail. Battery relocated to trunk to make this work. You could still find a way to mount battery near oem spot but i decided on rear right trunk area for battery.
Rivnuts attached this mount to the frame rail. Battery relocated to trunk to make this work. You could still find a way to mount battery near oem spot but i decided on rear right trunk area for battery.
0 2021/01/31 16:47:22
0 2021/01/31 16:55:12