AcuraZine - Acura Enthusiast Community
Got off the old shifter!
Got off the old shifter!
0 2019/07/14 18:18:47
Working to get everything off without scratching any components(or breaking).
Working to get everything off without scratching any components(or breaking).
0 2019/07/14 18:18:30
0 2019/07/14 18:17:23
0 2019/07/14 18:17:13
0 2019/07/14 18:17:04
I found solid copper wire for the paddle shifters on the Comptech TL. I’ll use the left over wires from the 550cc injector clips to solder to the solid copper. That was there are soft multiwire tips.
I found solid copper wire for the paddle shifters on the Comptech TL. I’ll use the left over wires from the 550cc injector clips to solder to the solid copper. That was there are soft multiwire tips.
0 2019/07/14 12:29:14
Intake upgrade parts are trickling in!
Intake upgrade parts are trickling in!
0 2019/07/14 12:29:03
Had to remove the front seats to access the screws on the side of the center console.
Had to remove the front seats to access the screws on the side of the center console.
0 2019/07/14 12:28:52
Looks like Audi of Bellevue could use higher quality cleaners. Those fries have been there for years!
Looks like Audi of Bellevue could use higher quality cleaners. Those fries have been there for years!
0 2019/07/14 12:28:40
This is how the shifter looks preinstall.
This is how the shifter looks preinstall.
0 2019/07/14 12:28:30
0 2019/07/13 21:27:29
0 2019/07/13 21:27:12
0 2019/07/13 21:26:59
0 2019/07/13 21:26:49
0 2019/07/13 21:26:31
0 2019/07/13 21:26:17
0 2019/07/13 21:26:05
0 2019/07/13 21:12:56
0 2019/07/13 21:12:45
0 2019/07/13 21:08:08
0 2019/07/13 21:04:44
0 2019/07/13 21:04:38
0 2019/07/13 21:04:27
0 2019/07/13 21:04:16
0 2019/07/12 20:17:50
0 2019/07/12 20:17:40
0 2019/07/12 20:17:31
0 2019/07/11 17:06:34
0 2019/07/11 17:06:25
0 2019/07/11 17:06:16
0 2019/07/11 11:44:59
0 2019/07/11 11:44:55
0 2019/07/10 18:15:37
This one’s for crabby <3
This one’s for crabby <3
0 2019/07/10 17:55:11
0 2019/07/07 23:25:37
Wipe any grim off the I/M,gasket and runner surfaces to do they mate flushly.
Wipe any grim off the I/M,gasket and runner surfaces to do they mate flushly.
0 2019/07/07 22:53:33
Lightly used(13k miles) Genuine Acura RDX Injectors with clips going up for sale in the Black Market! If you rewind a few pages, you have a guide to install these very injectors into your own car.
Lightly used(13k miles) Genuine Acura RDX Injectors with clips going up for sale in the Black Market! If you rewind a few pages, you have a guide to install these very injectors into your own car.
0 2019/07/07 22:53:26
Rear wires are facing the same direction as the fronts.
Rear wires are facing the same direction as the fronts.
0 2019/07/07 22:45:15
The yellow wire with black stripe should all face the same way. Or you could face them the other way. But make sure they are all going the same way or it will fire backwards.
The yellow wire with black stripe should all face the same way. Or you could face them the other way. But make sure they are all going the same way or it will fire backwards.
0 2019/07/07 22:45:03
Refit the wires in the Same position as they were on the other clips.
Refit the wires in the Same position as they were on the other clips.
0 2019/07/07 22:44:51