AcuraZine - Acura Enthusiast Community
A buddy of mine had the same issues with his Pranks adaptor kit, so he had to make the correct adaptor plate.
A buddy of mine had the same issues with his Pranks adaptor kit, so he had to make the correct adaptor plate.
0 2020/05/26 08:39:50
Poor man’s supercharger is ready for install!
Poor man’s supercharger is ready for install!
0 2020/05/26 08:40:26
Beginning the disassembly if the MP90 Comptech S/C!
Beginning the disassembly if the MP90 Comptech S/C!
0 2020/05/26 08:40:36
Check out the aftermarket Billet aluminum rotors! This will make it spin up and down much faster due to lower dynamic weight!
Check out the aftermarket Billet aluminum rotors! This will make it spin up and down much faster due to lower dynamic weight!
0 2020/05/26 08:40:45
Template for the only 04-06 TL Poor man’s M90 adaptor kit. Everything is being made from scratch and machined correctly. The Pranks kit must have been an April fools joke because not a single adaptor plate bolt hole lines up with the M90. I’m telling the next guy what I’m experiencing after paying $548 for for cut plates of 3/8” aluminum. If the holes were square, I wouldn’t mention it.
Template for the only 04-06 TL Poor man’s M90 adaptor kit. Everything is being made from scratch and machined correctly. The Pranks kit must have been an April fools joke because not a single adaptor plate bolt hole lines up with the M90. I’m telling the next guy what I’m experiencing after paying $548 for for cut plates of 3/8” aluminum. If the holes were square, I wouldn’t mention it.
0 2020/05/26 13:10:19
Let’s see how square my bolt holes end up.
Let’s see how square my bolt holes end up.
0 2020/05/26 13:10:52
The Pranks kit must have been an April fools joke because not a single adaptor plate bolt hole lines up with the M90. I’m telling the next guy what I’m experiencing after paying $548 for for cut plates of 3/8” aluminum. If the holes were square, I wouldn’t mention it.
The Pranks kit must have been an April fools joke because not a single adaptor plate bolt hole lines up with the M90. I’m telling the next guy what I’m experiencing after paying $548 for for cut plates of 3/8” aluminum. If the holes were square, I wouldn’t mention it.
0 2020/05/26 13:17:41
Let’s see how square my bolt holes end up being.
Let’s see how square my bolt holes end up being.
0 2020/05/26 13:17:57
Trying to center the belt line square with the pulleys. Dual S/Cs?!
Trying to center the belt line square with the pulleys. Dual S/Cs?!
0 2020/05/26 13:18:10
Square enough!
Square enough!
0 2020/05/26 13:18:23
Practicing driving skill utilizing the 2003 2G TL on Gran Turismo 6.
Practicing driving skill utilizing the 2003 2G TL on Gran Turismo 6.
0 2020/05/26 17:39:50
Mr.Wellington.
Mr.Wellington.
0 2020/05/28 17:44:19
ZZ Performances’ newest Stage 2.5 intercooler core. This puppy will lower your intake temps 60-100F. I plan to enlarge the radiator surface area for increased airflow.
ZZ Performances’ newest Stage 2.5 intercooler core. This puppy will lower your intake temps 60-100F. I plan to enlarge the radiator surface area for increased airflow.
0 2020/05/28 17:44:31
So excited see how cold we can make my silver TL vs the black Type-S with the Rotrex on it.
So excited see how cold we can make my silver TL vs the black Type-S with the Rotrex on it.
0 2020/05/28 17:44:43
Water ports!
Water ports!
0 2020/05/28 17:44:52
Spotted a 3G TL on ‘Curb your enthusiasm’!
Spotted a 3G TL on ‘Curb your enthusiasm’!
0 2020/05/29 11:35:38
0 2020/05/29 11:41:04
Did a rough draft of the custom plates.
Did a rough draft of the custom plates.
0 2020/05/29 11:41:13
Had to put the template onto the intake manifold.
Had to put the template onto the intake manifold.
0 2020/05/29 11:41:21
Had to get the measurements for the serpentine belt.
Had to get the measurements for the serpentine belt.
0 2020/05/29 11:41:31
Straight as an arrow!
Straight as an arrow!
0 2020/05/29 11:41:40
Because the S/C is ported, a custom inlet is being modeled to accommodate the larger size.
Because the S/C is ported, a custom inlet is being modeled to accommodate the larger size.
0 2020/05/30 17:37:13
Specing out the bolt holes so the machine can perfectly drill each one. The Pranks kit holes are eyeballed compared to the method.
Specing out the bolt holes so the machine can perfectly drill each one. The Pranks kit holes are eyeballed compared to the method.
0 2020/05/30 17:37:21
Poor man’s S/C back on under the knife. Car Mod Porn
Poor man’s S/C back on under the knife. Car Mod Porn
0 2020/05/30 17:37:24
Getting all the bolt holes on the plenum modeled for the 04-08 TL adaptor plate.
Getting all the bolt holes on the plenum modeled for the 04-08 TL adaptor plate.
0 2020/05/30 17:37:28
Flow friendly 04-08 intake manifold.
Flow friendly 04-08 intake manifold.
0 2020/05/30 18:19:52
Not so flow friendly manifold.
Not so flow friendly manifold.
0 2020/05/30 18:20:09
Bling
Bling
0 2020/06/02 18:24:32
Bling
Bling
0 2020/06/02 18:24:36
MAGA! (Make Acurazine Great Again)
MAGA! (Make Acurazine Great Again)
0 2020/06/02 18:24:39
0 2020/06/04 06:33:30
0 2020/06/04 06:33:34
0 2020/06/04 06:33:38
ZZP is a great place! Can’t say enough good about them!
ZZP is a great place! Can’t say enough good about them!
0 2020/06/04 17:24:35
Parts looking nice!
Parts looking nice!
0 2020/06/04 17:24:44
ASPEC NSX r/c car. Happy to have it!
ASPEC NSX r/c car. Happy to have it!
0 2020/06/04 17:29:23
0 2020/06/04 17:29:32
0 2020/06/04 17:29:41
Ahh memories...
Ahh memories...
0 2020/06/04 17:29:50
Marcus of Heeltoe is my main mang!
Marcus of Heeltoe is my main mang!
0 2020/06/05 20:46:59