AcuraZine - Acura Enthusiast Community
0 2019/07/15 16:19:51
0 2019/07/16 21:56:12
0 2019/07/17 10:09:18
I’m looking for a way to free up space on the driver side engine bay to make room for making a 4” to 3.5” cold air intake for the Rotrex. I saw an opportunity to completely remove the battery and metal tray that holds it up. Replace the battery for a mini one and relocate it to the front left portion of the rear right passenger footwell with a battery relocation kit. This will serve many purposes; Weight distribution, lowest point of the car, less weight in the front drivers side.
I’m looking for a way to free up space on the driver side engine bay to make room for making a 4” to 3.5” cold air intake for the Rotrex. I saw an opportunity to completely remove the battery and metal tray that holds it up. Replace the battery for a mini one and relocate it to the front left portion of the rear right passenger footwell with a battery relocation kit. This will serve many purposes; Weight distribution, lowest point of the car, less weight in the front drivers side.
0 2019/07/17 17:21:48
Okay Fellas, I’m having another go at installing the paddle shifters. Upon removing he steering wheel airbag, the solid copper doorbell wire I used piped right out of the socket.. It was not ment for this.
Okay Fellas, I’m having another go at installing the paddle shifters. Upon removing he steering wheel airbag, the solid copper doorbell wire I used piped right out of the socket.. It was not ment for this.
0 2019/07/19 12:09:22
Using the left over 550cc injector clip wires to solder on the ends . Also soldering everything this time(Now that I own a solving gun). It wasn’t hot enough to solder the starter wire(speaker wire) to the modified starter, but it’s perfect for this. Going to try to be as detailed as possible for Zeta.
Using the left over 550cc injector clip wires to solder on the ends . Also soldering everything this time(Now that I own a solving gun). It wasn’t hot enough to solder the starter wire(speaker wire) to the modified starter, but it’s perfect for this. Going to try to be as detailed as possible for Zeta.
0 2019/07/19 12:09:34
0 2019/07/19 12:51:25
Shifter end wiring was right and soldered. So I reassembled the interior. Steering wheel column end now has correct 14g wiring soldered and ready to be put into the column clip. Steering wheel still needs to be rewired/soldered.
Shifter end wiring was right and soldered. So I reassembled the interior. Steering wheel column end now has correct 14g wiring soldered and ready to be put into the column clip. Steering wheel still needs to be rewired/soldered.
0 2019/07/19 16:27:32
0 2019/07/19 16:34:55
New battery box fits like a glove. At 6’2” I fit comfortably in the passenger seat and keep most of my range of reclining motion. This box is bigger than the one in the Comptech trunk but is more stable.
New battery box fits like a glove. At 6’2” I fit comfortably in the passenger seat and keep most of my range of reclining motion. This box is bigger than the one in the Comptech trunk but is more stable.
0 2019/07/20 14:15:09
Turned on the Acura LED light in anticipation of the air suspension kit install. https://youtu.be/vdRV6l9ne_Q
Turned on the Acura LED light in anticipation of the air suspension kit install. https://youtu.be/vdRV6l9ne_Q
0 2019/07/20 14:15:18
0 2019/07/20 15:02:46
0 2019/07/20 15:02:54
0 2019/07/20 15:03:02
0 2019/07/20 15:03:12
0 2019/07/20 20:10:36
0 2019/07/20 20:10:44
0 2019/07/20 20:10:52
0 2019/07/20 20:11:01
0 2019/07/20 20:12:00
0 2019/07/20 20:12:09
0 2019/07/20 20:12:18
0 2019/07/20 20:12:26
0 2019/07/20 20:12:36
0 2019/07/21 21:51:57
Still in the garage on the lowlow.
Still in the garage on the lowlow.
0 2019/07/23 04:40:15
0 2019/07/23 04:40:23
Coilovers came in yesterday evening from Heeltoe Automotive! Hope to install them this evening.
Coilovers came in yesterday evening from Heeltoe Automotive! Hope to install them this evening.
0 2019/07/23 04:41:22
0 2019/07/23 04:44:07
Titanium Valve springs and Retainers for TL-S6.
Titanium Valve springs and Retainers for TL-S6.
0 2020/02/20 09:52:55
Brian Crower Rods for TL-S6
Brian Crower Rods for TL-S6
0 2020/02/20 09:53:06
0 2020/02/20 09:53:12
Upgraded the TL-B5 from 3” to 4” intake. No retune.
Upgraded the TL-B5 from 3” to 4” intake. No retune.
0 2020/02/20 09:53:29
Installed 04-05 intake manifold and plenum. Bit heavier but better looking
Installed 04-05 intake manifold and plenum. Bit heavier but better looking
0 2020/02/20 09:53:41
Gerzy Bear Performance front bumper. Still need 04-06 grill assembly. Painter paid and ready.
Gerzy Bear Performance front bumper. Still need 04-06 grill assembly. Painter paid and ready.
0 2020/02/20 09:53:51
Dyno Days BBQ 2019 @ English Racing
Dyno Days BBQ 2019 @ English Racing
0 2020/02/20 09:59:16
0 2020/02/20 10:06:45
0 2020/02/20 10:07:02
0 2020/02/20 10:07:13
TL sleeping before engine removal.
TL sleeping before engine removal.
0 2020/02/20 10:07:21