AcuraZine - Acura Enthusiast Community
0 2019/05/24 18:31:05
0 2019/05/24 18:31:16
In all it’s non-SAC glory.
In all it’s non-SAC glory.
0 2019/05/24 20:18:36
In all it’s non-SAC glory!
In all it’s non-SAC glory!
0 2019/05/24 20:20:59
Old clutch still has meat on it. It was just a lack of pressure from the pressure plate that allowed it to spin.
Old clutch still has meat on it. It was just a lack of pressure from the pressure plate that allowed it to spin.
0 2019/05/25 04:52:53
To remove the pressure plate you must shimmy the tranny into the perfect position. And thing less will end in the inability to remove PP due to spline shaft pressing it against the FlyWheel. PP and clutch disk will come out together. I was easier to remove the clutch disk in between the PP and FW first.
To remove the pressure plate you must shimmy the tranny into the perfect position. And thing less will end in the inability to remove PP due to spline shaft pressing it against the FlyWheel. PP and clutch disk will come out together. I was easier to remove the clutch disk in between the PP and FW first.
0 2019/05/25 04:53:02
There are the FW bolts. Size #17 12 point Short 3/8 socket fits like a glove.
There are the FW bolts. Size #17 12 point Short 3/8 socket fits like a glove.
0 2019/05/25 04:53:09
Use a 3/8 wrench of a smaller caliber.
Use a 3/8 wrench of a smaller caliber.
0 2019/05/25 04:53:18
Use a breaker bar to give you leverage
Use a breaker bar to give you leverage
0 2019/05/25 04:53:24
I used a Dremel to shave the socket tip so it would completely seat over the FW bolt. The last thing we want are rounded FW bolts.
I used a Dremel to shave the socket tip so it would completely seat over the FW bolt. The last thing we want are rounded FW bolts.
0 2019/05/25 04:53:31
Finished product!
Finished product!
0 2019/05/25 04:53:38
Spotted a Type-S on the way to Cars and Coffee with what looks to Be a Comptech exhaust!
Spotted a Type-S on the way to Cars and Coffee with what looks to Be a Comptech exhaust!
0 2019/05/25 10:53:44
0 2019/05/25 10:53:53
0 2019/05/25 10:54:01
0 2019/05/25 10:54:11
0 2019/05/25 10:54:20
0 2019/05/25 10:54:28
0 2019/05/25 10:54:39
0 2019/05/25 10:54:47
0 2019/05/25 10:54:56
0 2019/05/25 10:55:04
0 2019/05/25 10:55:14
0 2019/05/25 10:55:38
Comptech exhaust?
Comptech exhaust?
0 2019/05/25 11:45:33
0 2019/05/25 11:45:43
0 2019/05/25 11:45:52
0 2019/05/25 11:46:04
0 2019/05/25 11:46:15
0 2019/05/25 11:46:24
0 2019/05/25 11:46:34
0 2019/05/25 11:46:43
0 2019/05/25 11:46:54
0 2019/05/25 11:47:05
0 2019/05/25 11:47:19
0 2019/05/25 11:47:31
Old flywheel
Old flywheel
0 2019/05/25 15:22:02
Cleaned the inside of the tranny with brake cleaner.
Cleaned the inside of the tranny with brake cleaner.
0 2019/05/25 15:22:10
Old throw out bearing
Old throw out bearing
0 2019/05/25 15:22:17
Cleaned engine side with brake cleaner. Rear main seal is in great shape. Looks fresh. I added a bit of the Honda lube to keep it that way.
Cleaned engine side with brake cleaner. Rear main seal is in great shape. Looks fresh. I added a bit of the Honda lube to keep it that way.
0 2019/05/25 15:22:25
Clean the throw out rod with brake cleaner and use the Honda lube to grease all the connection points.
Clean the throw out rod with brake cleaner and use the Honda lube to grease all the connection points.
0 2019/05/25 15:22:32