AcuraZine - Acura Enthusiast Community
Checking the upper solenoid it looks squeaky clean. I was hoping to find something.
Checking the upper solenoid it looks squeaky clean. I was hoping to find something.
0 2021/04/15 21:18:34
Here is the Transmission with the upper solenoid off.
Here is the Transmission with the upper solenoid off.
0 2021/04/15 21:18:26
Remove the bolt where my Fwanga’ is and your wiring harness plastic will be free, allowing you access to undo the six bolts of the lower transmission solenoid.
Remove the bolt where my Fwanga’ is and your wiring harness plastic will be free, allowing you access to undo the six bolts of the lower transmission solenoid.
0 2021/04/15 20:46:59
I couldn’t find the bolt to remove the wiring harness plastic and worked around it. Not as fun as removing the bolt on the next pic.
I couldn’t find the bolt to remove the wiring harness plastic and worked around it. Not as fun as removing the bolt on the next pic.
0 2021/04/15 20:46:51
Here is the shifter free of the pin. There are also two nuts that hold the upper portion of the shifter that need to be removed.
Here is the shifter free of the pin. There are also two nuts that hold the upper portion of the shifter that need to be removed.
0 2021/04/15 20:46:45
Remove the pin holder and pin of the shifter
Remove the pin holder and pin of the shifter
0 2021/04/15 20:46:42
Here is a shot of the lower solenoid. There are six bolts and they are not easy to get to IF you don’t remove the one side bolt that holds the wiring harness plastic to the Auto tranny case.
Here is a shot of the lower solenoid. There are six bolts and they are not easy to get to IF you don’t remove the one side bolt that holds the wiring harness plastic to the Auto tranny case.
0 2021/04/15 20:46:36
These are the two solenoids on the 04-08 Acura TL.
These are the two solenoids on the 04-08 Acura TL.
0 2021/04/15 20:46:28
Undo the four bolts on the upper solenoid.
Undo the four bolts on the upper solenoid.
0 2021/04/15 20:46:19
Working on the M90 today. Going to see if there is any gunk/grime in the solenoids.
Working on the M90 today. Going to see if there is any gunk/grime in the solenoids.
0 2021/04/15 20:46:12
Look at the difference between the M90 fuel line “Y” and the one going into the Turbo TL. Got a lil’ heft to ‘em!
Look at the difference between the M90 fuel line “Y” and the one going into the Turbo TL. Got a lil’ heft to ‘em!
0 2021/04/15 19:52:53
We are going to change out his valve cover seals to stop a leak on the front head this Saturday.
We are going to change out his valve cover seals to stop a leak on the front head this Saturday.
0 2021/04/15 19:50:22
My Son brought his 2004 6MT over today.
My Son brought his 2004 6MT over today.
0 2021/04/15 19:50:13
In good Post-Op care! Isn’t she beautiful? Purrs like a kitten now
In good Post-Op care! Isn’t she beautiful? Purrs like a kitten now
0 2021/04/10 09:15:12
During the 13 hour surgery.
During the 13 hour surgery.
0 2021/04/10 09:15:05
0 2021/04/10 09:14:46
The technique employed by Rich performance in Seattle. This guy has four NSXs, one of which is J series powered! How could they!
The technique employed by Rich performance in Seattle. This guy has four NSXs, one of which is J series powered! How could they!
0 2021/04/10 09:10:03
Helms manual for proper Dowel pins install on J-Series Heads.
Helms manual for proper Dowel pins install on J-Series Heads.
0 2021/04/10 09:09:59
Used the third set of PnP heads to harvest dowel pins for Ilyas CNC ported P2R heads!
Used the third set of PnP heads to harvest dowel pins for Ilyas CNC ported P2R heads!
0 2021/04/10 09:07:34
Used the 3rd set of PnP’d heads to remove dowel pins from!
Used the 3rd set of PnP’d heads to remove dowel pins from!
0 2021/04/10 09:06:17
I took dowel pins from my third set of PnP’d heads to swap onto Ilyas!
I took dowel pins from my third set of PnP’d heads to swap onto Ilyas!
0 2021/04/10 08:56:18
:D
:D
0 2021/04/10 08:52:44
:)
:)
0 2021/04/10 08:52:36
His car is so clean. EVERYTHING is done to his suspension.
His car is so clean. EVERYTHING is done to his suspension.
0 2021/04/09 22:07:23
His TL-S is from Canada, so his temp is in Celsius and his speedometer is Kilometers.
His TL-S is from Canada, so his temp is in Celsius and his speedometer is Kilometers.
0 2021/04/09 22:07:16
He’s got the complete OEM faux CF Interior!
He’s got the complete OEM faux CF Interior!
0 2021/04/09 22:07:08
The TL haven
The TL haven
0 2021/04/09 22:07:00
0 2021/04/08 18:49:05
More organized :)
More organized :)
0 2021/04/08 18:48:54
The 1/4” dial-type torque wrench is in. This will be part of the preload tester tool. EBC Yellow brakes are in for Track Day @ PIR April 30! Rasps are in for deburring modifies metals.
The 1/4” dial-type torque wrench is in. This will be part of the preload tester tool. EBC Yellow brakes are in for Track Day @ PIR April 30! Rasps are in for deburring modifies metals.
0 2021/04/08 18:48:44
0 2021/04/07 12:52:24
0 2021/04/06 21:47:46
0 2021/04/06 21:47:42
Cleaned the engine bay a bit to get it ready for 85a innovative mount install tomorrow.
Cleaned the engine bay a bit to get it ready for 85a innovative mount install tomorrow.
0 2021/04/06 21:11:04
1 of 1 fuel system. Checked fitment and assembled the vacuum nib and fuel gauge using PTFE thread tape. I will upgrade the fuel canister line because the OEM plastic 90 degree coming from the fuel cradle is 6an, I need 10an.
1 of 1 fuel system. Checked fitment and assembled the vacuum nib and fuel gauge using PTFE thread tape. I will upgrade the fuel canister line because the OEM plastic 90 degree coming from the fuel cradle is 6an, I need 10an.
0 2021/04/06 21:10:47
Used my old GM synchromesh oil to hand clean the engine bay a bit more before installing 85A Innovative mounts tomorrow.
Used my old GM synchromesh oil to hand clean the engine bay a bit more before installing 85A Innovative mounts tomorrow.
0 2021/04/06 20:49:36
1 of 1 fuel system. Checked fitment and assembled the vacuum bib and fuel gauge using PTFE thread so the E85 won’t leak through.
1 of 1 fuel system. Checked fitment and assembled the vacuum bib and fuel gauge using PTFE thread so the E85 won’t leak through.
0 2021/04/06 20:49:23
10an & 8an braided fuel lines and DW 400 that apparently is good for 1000whp.
10an & 8an braided fuel lines and DW 400 that apparently is good for 1000whp.
0 2021/04/06 20:49:06
I sound a 12mm bolt and cut it to the head. This will be welded onto the portion that we will cut on the intermediate shaft portion.
I sound a 12mm bolt and cut it to the head. This will be welded onto the portion that we will cut on the intermediate shaft portion.
0 2021/04/06 20:48:59
Here is the intermediate shaft in the drivers side of the diff!
Here is the intermediate shaft in the drivers side of the diff!
0 2021/04/06 20:31:19