Ok, so yesterday I decided to give the paint some TLC. Im a goober cause I dont have any pics yet, but I wanted to post my procedure before I forget.

Wash - Meg's Gold Car Wash/Wipe down with WW MF towel and 50/50 mix IPA/H2O.
Clay - Sonus Fine Detailing Clay/Clay Magic Lube, wiped down with IPA/H2O mix.
Polish - Poorboys SSR1 applied w/PC, Orange LC Pad. Swirls were minimal.
Seal - Jeffs Werkstatt Acrylic Jett applied w/PC, Grey LC Pad, removed with Acrylic Glos
Wax - Natty's Blue paste wax applied w/PC, Grey LC Pad

Went much eaiser on the Nattys this time, and it came off much eaiser. I know the JWAJ should be applied by hand, but I put two or three drops on the pad, and that was good enough to do each panel.

I skipped the Klass AIO this time, we'll see how the JWAJ holds up.

The PB SSR1 did dust a bit. I remembered when I used it last time, it really dusted when setting the PC to 6. But I kept it under that this time and the dusting was minimal. I really like the Optimum polish, but I found that it stains the black trim too much and I didnt want to take the time to tape.

I'll try to get some pics up tomorrow

 

nice job
how long did you spend on it ? I'm sio fawking lazy I 'm just gonna let a pro do it i guess

 

About 3 hours. That was just for the exterior. The interior just needed a wipe down...

 

WE WANT PICS,.........always nice to see another TSX nice and detailed up.

 

Joe, looking forward to your assessment of AJ as well as the pix ....

 

OK, the only IPA I'm familiar with has hops in it and about 6% alcohol. So what is it you used?

And

 

^^ and

 

Well, this is a bit stronger then a pale ale IsoPropyl Alcohol...

Sorry, I forgot to take pics. And now of course it has a fine layer of dust.

 

booo slacker

 

 

pics first, post second.




<---- washed TSX on Sunday afternoon (no rain in SoCal for months). Thunderstorm rolls through Long Beach Sunday night leaving water and dust spots.