Wheel opinions
#1
Pro
Thread Starter
Wheel opinions
as many know, I bought a mint 04 TL base back in October, with 16K miles on it.
amazingly, I succeeded in curbing 3 of my 4 wheels and its driving me nuts.
ive decided to either:
- buy a new set of (reconditioned) stock 04 wheels and swap my tires and TPMS
OR
- buy a set of Type-S wheels and swap my tires and TPMS over and keep my rashed stockers and mount some winter/snow tires on them
opinions?
for reference, its a nice and shiny 04 TL with a small deck lid lip and tint all around.
amazingly, I succeeded in curbing 3 of my 4 wheels and its driving me nuts.
ive decided to either:
- buy a new set of (reconditioned) stock 04 wheels and swap my tires and TPMS
OR
- buy a set of Type-S wheels and swap my tires and TPMS over and keep my rashed stockers and mount some winter/snow tires on them
opinions?
for reference, its a nice and shiny 04 TL with a small deck lid lip and tint all around.
The following 2 users liked this post by justnspace:
GKinColo08TL (01-13-2015),
Slpr04UA6 (01-13-2015)
#5
Senior Moderator
iTrader: (1)
why not just get your 3 wheels re-done instead of buying new ones?
The following 2 users liked this post by ggesq:
justnspace (01-13-2015),
Slpr04UA6 (01-13-2015)
#7
Jeff
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Long story short my type s ones need to be refinished now
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Trending Topics
#8
Registered Bunny
i agree!
I did the same thing you are thinking of doing. bought a set of brand new type s waffles, not the reps lol. had them on for maybe 2-3 months, managed to curb the passenger side one, the driver side one got mangled in one of them mechanical car washes (NEVER AGAIN) and sold my OG OEM ones as they were really bad when I bought the car.
Long story short my type s ones need to be refinished now![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Long story short my type s ones need to be refinished now
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#9
Jeff
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
^^ well the one here has like a mechanical boot thing that your drivers side tire goes in. I must have been too close to the edge of it and when I got out of the car wash the lip of my rim was gouged
#10
Pro
Thread Starter
Lol at learning the dimensions of the car.... I've owned an 03 Type-S (then new, Aegean Blue Pearl) along with about 15 other cars (Maxima SE, countless 5.0's with the ROH ZR's which were the shit back in the day)
So, "learning the dimensions" isn't an issue..... One of the three fell victim to a car wash too, and I've likely been driving longer than some of you have been breathing.
Thanks for the input though.
So, "learning the dimensions" isn't an issue..... One of the three fell victim to a car wash too, and I've likely been driving longer than some of you have been breathing.
Thanks for the input though.
#11
Moderator
iTrader: (1)
Lol at learning the dimensions of the car.... I've owned an 03 Type-S (then new, Aegean Blue Pearl) along with about 15 other cars (Maxima SE, countless 5.0's with the ROH ZR's which were the shit back in the day)
So, "learning the dimensions" isn't an issue..... One of the three fell victim to a car wash too, and I've likely been driving longer than some of you have been breathing.
Thanks for the input though.
So, "learning the dimensions" isn't an issue..... One of the three fell victim to a car wash too, and I've likely been driving longer than some of you have been breathing.
Thanks for the input though.
The following 5 users liked this post by justnspace:
d1sturb3d119 (01-13-2015),
ggesq (01-13-2015),
GKinColo08TL (01-13-2015),
polobunny (01-13-2015),
Slpr04UA6 (01-13-2015)
#13
Jeff
iTrader: (3)
Join Date: Jul 2014
Location: Port City, New Brunswick Canada
Posts: 5,728
Received 815 Likes
on
726 Posts
And fuck car washes eh! Ill never go in one of them again as long as live.
#14
Registered Bunny
Lol at learning the dimensions of the car.... I've owned an 03 Type-S (then new, Aegean Blue Pearl) along with about 15 other cars (Maxima SE, countless 5.0's with the ROH ZR's which were the shit back in the day)
So, "learning the dimensions" isn't an issue..... One of the three fell victim to a car wash too, and I've likely been driving longer than some of you have been breathing.
Thanks for the input though.
So, "learning the dimensions" isn't an issue..... One of the three fell victim to a car wash too, and I've likely been driving longer than some of you have been breathing.
Thanks for the input though.
I'll be honest and say I'm not a stunt driver and I can't park in parallel in a split second, but I just take my time and make sure I don't hit the curb. I've done it before in old junkers.
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
Edit: Also ouch WDP TL-S 02, that sucks. I don't think there's any mechanical ones near here anymore though.
#16
Chapter Leader (Southern Region)
04 TL doesn't have TPMS
![Roll Eyes](https://acurazine.com/forums/images/smilies/rolleyes.gif)
The following 2 users liked this post by Majofo:
GKinColo08TL (01-13-2015),
Slpr04UA6 (01-13-2015)
#18
Pro
Thread Starter
My bad. I thought TPMS was mandatory in 04.... But it was 07 (I think)
I was asking opinions on refinishing my stockers or getting TL-S wheels..... Not having my balls busted.
This obviously isn't the community I thought it was.
Thanks for the non-dick replies from those who gave them.
I'll also be looking into the Hyundai Genesis 19"s now too that i saw them.
Anyone who has input is welcome
I was asking opinions on refinishing my stockers or getting TL-S wheels..... Not having my balls busted.
This obviously isn't the community I thought it was.
Thanks for the non-dick replies from those who gave them.
I'll also be looking into the Hyundai Genesis 19"s now too that i saw them.
Anyone who has input is welcome
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#19
Chapter Leader (Southern Region)
If you like the wheels, refinish them. A reputable / decent wheel shop should only cost ~$50/wheel. Otherwise you can DIY. Not difficult. If you want a new set of wheels, whatever floats your boat. Tons of threads with different setups. You could also sell your wheels.. probably get 400-600 depending on the tires.
The following users liked this post:
justnspace (01-14-2015)
#20
Moderator
iTrader: (1)
^like majofo said; we've already gave you help.
you can DIY refinish.
send them out to be refinished.
buy new wheels.
buy used wheels.
buy aftermarket wheels.
There is literally SOOOO MANY options for you.
but whats to say that you wont fuck them up again, being a new TL'er and all?
p.s. it took me quite a while to get used to the TL, and even then the dimensions were still weird, and I came from a 2004 Dodge Ram 1500
you can DIY refinish.
send them out to be refinished.
buy new wheels.
buy used wheels.
buy aftermarket wheels.
There is literally SOOOO MANY options for you.
but whats to say that you wont fuck them up again, being a new TL'er and all?
p.s. it took me quite a while to get used to the TL, and even then the dimensions were still weird, and I came from a 2004 Dodge Ram 1500
The following users liked this post:
polobunny (01-14-2015)
#22
Chapter Leader (Southern Region)
If it were me.. I'd rash the clean wheel just keep it balanced.
Thread
Thread Starter
Forum
Replies
Last Post