SFV People! Meet!
#9486
hey guys, i changed my air filter today and something came up. when the car is stationary, and i change into gear (reverse, neutral, drive) the idle drops to like 500rpm and the engine shudders for a second then goes back to normal. I didn't drive the car cause i was worried. Any ideas?
#9487
hey guys, i changed my air filter today and something came up. when the car is stationary, and i change into gear (reverse, neutral, drive) the idle drops to like 500rpm and the engine shudders for a second then goes back to normal. I didn't drive the car cause i was worried. Any ideas?
#9490
#9495
What: TimTim's Uninstall Meet We're going to need all the help we can get. Trying to finish in one day.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010
1. TimTim
2. n0rm
3.
4.
5.
6.
7.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010
1. TimTim
2. n0rm
3.
4.
5.
6.
7.
#9496
What: TimTim's Uninstall Meet We're going to need all the help we can get. Trying to finish in one day.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010
1. TimTim
2. n0rm
3. shawn
4.
5.
6.
7.
I can bring a jack and four jack stands (if we need them), and more tools. I'm guessing we're starting in the morning?
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010
1. TimTim
2. n0rm
3. shawn
4.
5.
6.
7.
I can bring a jack and four jack stands (if we need them), and more tools. I'm guessing we're starting in the morning?
#9499
Nate, if you can come later that would help! Thanks!
Last edited by n0rm; 02-08-2010 at 09:13 PM.
#9500
What: TimTim's Uninstall Meet We're going to need all the help we can get. Trying to finish in one day.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010 8:00 a.m.
1. TimTim
2. n0rm
3. Shawn
4.
5.
6.
7.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010 8:00 a.m.
1. TimTim
2. n0rm
3. Shawn
4.
5.
6.
7.
#9503
Alright here's the a list I can think of, off the top of my head. Stock wheels, stock bumpers, interior LEDs, coilovers, swapping out headlights for stock ones. Removing CAI and putting in stock intake, removing P2R throttle body spacer, removing j-pipe, removing back up leds, and trunk leds, removing load resistors in the trunk. Removing battery, replacing with stock one, removing black center grill trim and swapping with stock trim, removing progress rsb. There's a lot to do. my car will literally be in pieces. Someone needs to work the camera, cause Norm and I are gonna work as fast as a chop shop.
#9508
Alright here's the a list I can think of, off the top of my head. Stock wheels, stock bumpers, interior LEDs, coilovers, swapping out headlights for stock ones. Removing CAI and putting in stock intake, removing P2R throttle body spacer, removing j-pipe, removing back up leds, and trunk leds, removing load resistors in the trunk. Removing battery, replacing with stock one, removing black center grill trim and swapping with stock trim, removing progress rsb. There's a lot to do. my car will literally be in pieces. Someone needs to work the camera, cause Norm and I are gonna work as fast as a chop shop.
#9509
More than likely we're going to tackle the items that require special tools/shop equipment; spring compressors, jacks, jackstands, air compressors etc first. Tim and I can take apart TL suspension in 2.5 - 3 hours. My only concern is those fucking sway bar links again. Besides suspension, bumpers j pipe everything will be a piece of cake.
Tim, if you can get needle nose vise grips for your sway bar links, it will help a lot.
Tim, if you can get needle nose vise grips for your sway bar links, it will help a lot.
#9510
More than likely we're going to tackle the items that require special tools/shop equipment; spring compressors, jacks, jackstands, air compressors etc first. Tim and I can take apart TL suspension in 2.5 - 3 hours. My only concern is those fucking sway bar links again. Besides suspension, bumpers j pipe everything will be a piece of cake.
#9511
More than likely we're going to tackle the items that require special tools/shop equipment; spring compressors, jacks, jackstands, air compressors etc first. Tim and I can take apart TL suspension in 2.5 - 3 hours. My only concern is those fucking sway bar links again. Besides suspension, bumpers j pipe everything will be a piece of cake.
Tim, if you can get needle nose vise grips for your sway bar links, it will help a lot.
Tim, if you can get needle nose vise grips for your sway bar links, it will help a lot.
I'm confident we can do it within an hour too. We were cruising when we found out how to actually put the damn coilovers together.
#9512
Wife's last day in LA and it's crappy out, she flies out first thing in the morning to a blizzard........
Hopefully, the offers we presented get accepted so she can come home for good.
Hopefully, the offers we presented get accepted so she can come home for good.
#9513
What: TimTim's Uninstall Meet We're going to need all the help we can get. Trying to finish in one day.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010 8:00 a.m.
1. TimTim
2. n0rm
3. Shawn
4. Nate (might show up later in the day)
5.
6.
7.
Scope of Work:
Off the top of my shiny head:
1. Remove Coilovers and re-install stock suspension.
2. Remove RSB and re-install stock bar
3. Remove J-Pipe
4. Remove RJ Aero Kit and re-install stock bumpers side skirts, etc.
Where: Van Nuys (address will be pm'ed)
When: Saturday February 13, 2010 8:00 a.m.
1. TimTim
2. n0rm
3. Shawn
4. Nate (might show up later in the day)
5.
6.
7.
#9516
^ It only seems that way. A lot of the items are connected; coilovers/RSB/wheels, bumpers/headligths/center grille trim, CAI/TB Spacer.
I'm thinking when you come over Thursday or Friday, we can start working on the easy shit like leds, CAI and spacer.
I'm thinking when you come over Thursday or Friday, we can start working on the easy shit like leds, CAI and spacer.
#9517
Yeah, lets get crackin on friday, well run some errands, like removing resonator @ Rb performance, head to chemical guys and grab some stuff, then take off the front bumper and get some of the crap outta there. I have my stock intake cover on order with a filter. $113.00
Maybe we can paint my stock wheels while working on the car?
Anyways, I'll be over on Friday around 9am. cool?
Maybe we can paint my stock wheels while working on the car?
Anyways, I'll be over on Friday around 9am. cool?
#9518
Yeah, lets get crackin on friday, well run some errands, like removing resonator @ Rb performance, head to chemical guys and grab some stuff, then take off the front bumper and get some of the crap outta there. I have my stock intake cover on order with a filter. $113.00
Maybe we can paint my stock wheels while working on the car?
Anyways, I'll be over on Friday around 9am. cool?
Maybe we can paint my stock wheels while working on the car?
Anyways, I'll be over on Friday around 9am. cool?
#9520