CLOSED: 350's partout, RV6 J pipe, LEDs, Type S Tails and shift knob, mufflers
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
350's partout, RV6 J pipe, LEDs, Type S Tails and shift knob, mufflers
Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): PA
Item Condition: Used
RV6 V3 J pipe about 15K miles on it, surface rust but in great shape, no gaskets or bolts. $300.



9005/9006 HID kit. 35 watt DDM slim ballasts with only a few hours use, they warranty replacements for a kit I bought years ago. 3000K bulbs are in in the picture, I'll also include a set of 5000K bulbs since they don't fit anything else I own now. $40

Stock mufflers, resonator and tips, $10 each or they'll go to the scrap yard.



VLEDs V3 Triton Amber with resistors and eBay red bulbs, 7443/7440. The resistors are set for the higher load so these will plug and play with no wiring mods for the front and rear turn signals. I also have the smaller resistors pictured in the baggie if you just want to run the fronts. The rears are no name but very bright I think they were $30-40 new. $120 for all 4.

"Frosty" (I know, we don't talk about him anymore but these are the ones from his thread) fogs. 9006/9005 bulbs, I believe they'll fit in both but I had these in my fog lights, crazy bright. $50.

WDP door handle cap/lock delete, pop it on the driver door to cover the key hole $20.
Type S carbon fiber shift knob, $50.

Depo Type S tails, pristine condition, $120


Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
Trending Topics
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
I forgot I had these still, stock intake runners that I bought on eBay to port but never got around to. Not sure what they go for anymore but $50?



Also I found some WDP touch up pens, whoever has a WDP and buys something I'll throw it in the box for free.



Also I found some WDP touch up pens, whoever has a WDP and buys something I'll throw it in the box for free.
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
Yes, my paypal is sds12888@gmail.com, just make sure you put your address in the memo and I'll mail it out tomorrow.
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
Have you checked this thread yet?: Trader ratings information - AcuraZine Community
No reasonable offer refused for the remaining parts.
I kinow the (1) doesn't look like a link, but it's explained in the link I gave you above.
To access the Trader Ratings page, click on the number in parentheses (X) following the Trader Ratings line under the user name of the person you want to award the rating to.
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
Tail lights just sold.
VLED V3 Triton turn signals, HID kit, mufflers, and runners. I think I have the original struts sitting in the garage, they'd be free since they have 90K miles on them otherwise I'm gonna scrap them.
What else would be spend money on? Might as well cut out the middleman.
VLED V3 Triton turn signals, HID kit, mufflers, and runners. I think I have the original struts sitting in the garage, they'd be free since they have 90K miles on them otherwise I'm gonna scrap them.
What else would be spend money on? Might as well cut out the middleman.
Thread Starter
My first ricer
iTrader: (4)
Joined: Aug 2012
Posts: 1,521
Likes: 257
From: Willow Grove, PA
$100 shipped for the VLEDs and rear LEDs as pictured above.
$50 shipped for the runners also as pictured above.
Probably gonna just take the mufflers to scrap when I get around to it.
$50 shipped for the runners also as pictured above.
Probably gonna just take the mufflers to scrap when I get around to it.







