Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): CA
Item Condition: Used

Hey Azine! I am selling my custom 3" exhaust that came off my tl type s. The piping is 3" to a 24" resonator, to an open cutout, to a ypipe with 2.5" outlets, to 2.5" piping to 2.25" piping leading into the stock tl type s mufflers. I love the exhaust but decided to head into a different direction with performance and bought an atlp v2 exhaust =D. Located in Socal. Pick up only unless I have to chop it up, which I dont want to. I can be reached via text 714-360-832zero.

$250 obo

Here are some pictures:





I also have for sale some aspec blast pipes, basically vip style exhaust tips that are nice for anyone heading that direction:


I am selling them for 150 picked up each, 280 for the pair. retail is 190 from aspec themselves (cheapest price around).

I have a set of project kics r40 neochrome with locks and keys for 150 also:





my last pair of 25mm H&R spacers that are hubcentric and wheel centric for 64.1mm hub for $100 picked up



and lastly a pair of achilles atr sports that are 225/35/20 with 90% tread wear left for 150 for the pair:





Thanks again!

 

Looking like some fair prices, nice! GLWS!
Those lugs are great! I don't "NEED" them so I wish they were cheap.

 

do you know if i would poke with stock wheels running a 25 mm spacer?

 

depends on drop, fenders rolled etc...have 2 friends sit in your backseat and take a measuring tape and see if you have 1" between side of tire and the fender. If so, 25MM would work.

 

You can run them in both the front or the rear if at stock height, but it might poke in the front, flush in the rear. If lowered, it will fit the rear better since you will most likely rub the front.

Ty

Thank you
I know =_= I couldnt use my sound clip bc of your voice =_=

 

Will do OBO on the exhaust only!

 

how much for the 25mm spacer shipped to 77449?

 

$115 shipped

 

always wanted to do blast pipes on my TL... did you ever install them? sound clip?

 

Dont have any sound clips, but with a big resonator like the one Im selling, it sounded amazing. I just went with ATLP bc it is more quiet. If you like loud, growl, and deep, then blast pipes are the way to go.

 

Project kics sold to upnout.

Everythign else still remains. Prices are now OBO, will include a pair of oem front window visors with any purchase, the rears are somewhere on the freeway.

 

Lowering the exhaust to 250! Need it out!




mod edit-updated

 

How much for shipping to NY? also, the blast pipes are not meant to be welded to mufflers correct?

 

Blast pipes are welded as mufflers. I really liked it when I had it with the set up instead of my tl-s mufflers because of the look and tone. But I want to lay low and got a quieter exhaust (atlp). Shipping would be very expensive, and I would have to chop up the exhaust. This means you have to get everything rewelded, which isnt a problem to me if I bring it to any muffler shop.

 

in that case, might take blast pipes...I'll let you know

 

Tires, lug nuts, and spacers are sold.

blast pipes, exhaust, and side skirts are still available!

 

Exhaust sold and blast pipes sold. Only nbp tl-s side skirts remain and a set of generic neochrome lug nuts available