CLOSED: LIPPSTUH's CL-S 6-Speed Parts For Sale (Round 1)
02-21-2011, 03:39 AM
#1
LIPPSTUH's CL-S 6-Speed Parts For Sale (Round 1)
Category: Engine - Exhaust
Price: $150
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 2G, Type-S Model
Location (State/Prov/Terr): CA
Item Condition: Used
NOTICE: Some parts will require locals unless you can ship me your part and wait for me to swap yours with mine before I send you mine. Obviously think before you message me. I will do locals first. I'm in NO RUSH to sell, so chill out. Also, if I list something too high, PM me don't post in here. I haven't been around recently so I'm not familiar with prices of used items.
Prices are OBO, shipping not included, fees not included. I will take deposits for larger items (nonrefundable so think before you buy). I don't like using Paypal, cash/certified checks are preferred. In the end, MONEY TALKS.
Parts fit: 2nd gen CL, 2nd gen TL, 6th gen Accord. Others may very
Exhaust Parts
1. Random Technology XLR8 Hi-Flow Cat
Details: 2.5 in/out
Condition: est. 17,000 miles
Price: $220 / $150 + trade
Might need your (working) stock cat
2. Custom Magnaflow Exhaust (Requires stock trade)
Details: Uses Greddy Evo 2 Pipping. Scrapes on underside of tip
Condition: 8/10
Price: $250 + cost of labor + trade
3. AEM Blue Cold Air Intake
Details: It was cut in the middle to be converted for the supercharger. I have a coupler there now, works the same.
Condition: est. 30,000 miles. Filter cleaned 10,000 miles ago
Price: $140
Suspension Parts
4. Ingalls Camber Arms Requires stock trade
Details: This is NOT just the ball joint replacement, it is the whole arm. Modified to produce more negative camber, still corrects camber as well.
Condition: est. 10,000 miles
Price: $120 + trade
5. SPC Rear Camber Arms
Details: Goes to -4.0 camber, also corrects camber. One side is new then the other, the older side's bushing is cracked badly, but it doesn't affect performance or makes noise
Condition: See above
Price: $120
6. Neuspeed Strut Bar (Polished)
Details: No "Neuspeed" sticker
Condition 9/10
Price: $80
Exterior Parts:
7. Weathertech Window Visors
Details: They're the light shaded ones
Condition: Chips in one or two corners, can't see it while installed
Price: $40
8. Sarona Roof Spoiler
Details: Needs repaint
Condition: Body shop needs to primer and paint
Price: $180
Interior Parts:
9. Custom 3 12" Trunk Enclosure
Details: My old set up, already out of the car. Would need to trade your trunk lining. Subs not included
Condition: I would rewrap it. Additional $80 + material cost and I'll rewrap it for you
Price: $120
Round 2 parts will require more time for me to prepare I will list them here without details for those interested, but be warned they might not be ready just yet.
10. Custom TL 99-01 Lip Kit (Requires front oem bumper trade + oem side skirts)
Details: Front lip is molded to front bumper. Sideskirts are molded on top of CL sideskirts. Rear lip is screwed onto rear bumper (not molded).
Condition: You will need repaint since I have a custom color. Front bumper requires some body work, shouldn't be costly just some filler around parts of the lip.
Price: $1000 + trade
11. PSPEC Short shifter (Requires Stock shifter assembly trade)
Details: Only true short shifter made for the CL.
Condition: Its metal, superb lol
Price: $150 + trade
12. Voodoo Shift Knob (Requires trade)
Details: Polished
Condition: Has a tiny chip, who cares really?
Price: $35 + trade
13. Redline Goods Shift Boot: Black leather with red stitching (Requires Trade)
Details: I ordered 1" shorter than stock. Also see item #12
Condition: 1 month old
Price: $40 + trade
14. Redline goods Arm Rest: Black leather with red stitching + extra padding (Requires trade)
Details: I ordered a huge roll of padding and it's SO THICK, very nice, feels so good.
Condition: 1 month old
Price: $60 + Trade
15. Custom Navi setup (Requires some trade)
Details: Used stock navi bezel and custom mounted aftermarket double din (not included). Custom fabricated climate control to stock radio position. Right under it is a molded Kicker XSRC (amp remote, not included but can be). Trade requires stock non-navi bezel and possibly a single din bezel
Condition 8.5/10
Price: $150 + trade
16. Rotora Big Brake Kit
Details: Red calipers, a few minor paint chips here and there. Cross/drilled rotors.
Condition: 8/10
Price: $800
17. Eibach front & rear Sway Bars
Details: Rear comes with an adjustable endlink. Won't separate.
Condition: It's a sway bar.... doesn't get old or shitty
Price: $250
18. XS Power Headers
Details: It's fine, comes with the crappy flexpipe that I would recommend replacing since it'll be off the car
Condition, downpipe probably has a dent from being really low
Price: FREE if you uninstall it and reinstall my stock headers
19. Ralco Stocksize pulley
Details: It's a pulley
Condition: 8,000 miles
Price: FREE if you uninstall it and reinstall my stock one
20. AMR Custom Coilovers
Details: If you don't know, they're the best coilovers. Look em up, very rare. 12k/8k. MIGHT require stock trade, probably need tophats of stock suspension
Condition: 30,000 miles
Price: $800
21. Custom Fogs (Require trade)
Details: Cut up the 03 fog inserts and epoxied the fogs in. Includes wiring and TL fog button. Also includes HID kit with 3000k. I need your 03 inserts
Condition: 8/10 could use a little bondo + paint
Price: $150 + Trade
22. 03 Blacked out Headlights (Requires trade)
Details: Passenger side is a NEW unit (you can tell because it still has the rainbow coating on it. Driver side is still looking great. Blacked out corners (no amber
Condition: See above, SUPERB!
Price: $80 + 03 Headlight trade (pending condition)
If I didn't list it I guess you can ask me about it but remember to read the notice in the beginning of the post.
Contact instructions: PM me your email address and message and I will reply to your email. It's just easier.
Last edited by LIPPSTUH; 02-21-2011 at 03:42 AM.
02-21-2011, 03:08 PM
#11
Whats up with RDX owners?
iTrader: (9)
PM'd
02-22-2011, 09:25 AM
#21
6th Gear
Join Date: Oct 2010
Location: New Jersey
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
do have any pic of trunk set up? very interested...pm me please.
02-22-2011, 01:26 PM
#23
6th Gear
Join Date: Oct 2010
Location: New Jersey
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I want trunk set up. How much to ship to 07095???
02-22-2011, 02:36 PM
#25
Whats up with RDX owners?
iTrader: (9)
Any luck with those pics? Ive got paypal waiting for what we spoke about.
02-23-2011, 12:43 AM
#30
7th Gear
Join Date: Jul 2006
Location: B'ham,AL
Age: 40
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Interested in the shifter if not sold yet!
02-23-2011, 02:09 AM
#31
Sorry about the lag, I don't have much free time these days. Here are the pictures for what I can get, request them if you're REALLY interested.
3. AEM Blue Cold Air Intake
Price: $140
6. Neuspeed Strut Bar (Polished)
Price: $80 SOLD
10. Custom TL 99-01 Lip Kit (Requires front oem bumper trade + oem side skirts)
Price: $1000 + trade
Only damage to lip kit, requires repaint anyways. Shouldn't add much cost to repaint.
11. PSPEC Short shifter (Requires Stock shifter assembly trade)
Price: $150 + trade
12. Voodoo Shift Knob (Requires trade)
Price: $35 + trade
13. Redline Goods Shift Boot: Black leather with red stitching (Requires Trade)
Price: $40 + trade
14. Redline goods Arm Rest: Black leather with red stitching + extra padding (Requires trade)
Price: $60 + Trade
15. Custom Navi setup (Requires some trade)
Price: $150 + trade
16. Rotora Big Brake Kit
Price: $800
02-23-2011, 11:14 AM
#34
10th Gear
Join Date: Jun 2010
Location: NYC
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
PMd
02-23-2011, 11:52 AM
#37
Damn it lol I thought you just wanted the boot and knob haha. I want that damn shifter haha.
02-23-2011, 12:23 PM
#38
PMs replied. You guys are going to miss out on some RARE parts.... the AMR coilovers, the navi, the custom TL lip kit, and the hi-flow cat.... seriously if you don't jump on these parts who knows when you'll see someone else sell them.
02-24-2011, 05:40 PM
#40
Someone mistaken item #1 for the normal RT cat. This is an XLR8 hi-flow cat made by Random Technology, designed by XLR8. This one is a larger diameter and it's $100 more than the normal RT cat
Link: http://store.excelerateperformance.c.../i-262652.aspx
Link: http://store.excelerateperformance.c.../i-262652.aspx