CLOSED: Shift boot, Shift Knob, P2R Thermal spacer and filter
#1
Shift boot, Shift Knob, P2R Thermal spacer and filter
Category: Interior
Price: $20
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 2G, Type-S Model
Location (State/Prov/Terr): GA
Item Condition: Used
Paypal only. Prices include fees.
MOMO leather shift boot. Has velcro and leather straps to tie off the top. Base has elastic. No tears. Good condition
$20 shipped
Type-s Shift knob for Automatic. Emblem is in good condition. Leather is in fair condition. There are no tears and the stitching is still in tact. However, the top of the knob has wear. I would say the "tanning" has rubbed off -- see last picture.
$25 shipped
P2R Thermal gasket for throttle body. application is for 01-03 CL-s/TL-s. I do not know if this fits "base" models.
New item that was included in a package buy with P2R power plenums and thermal intake manifold gasket.
$20 shipped
P2R 4 inch air filter. This was used on my P2R 4 inch Air Intake. I switched over to an AEM. It is dirty, but from viewing the filter inside out..there appears to be a decent amount of life left in it. No tears and rubber is in good condition.
$20 shipped
Last edited by WHEEELMAN; 11-06-2010 at 07:08 PM.
#4
Quality not quantity in
iTrader: (3)
Join Date: May 2009
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Hey wheeelman how are you?
just wondering about two things,
did you use the shift knob with the shift boot? If so, how did you have them set up? I was thinking of doing a similar set up. TL auto shifter with a shift boot. if you have any pics that would be great. What set up are you doing next?
Also, why did you switch from the p2r 4 inch intake to a smaller one? did you feelor record gains from switching to the smaller one?
just wondering about two things,
did you use the shift knob with the shift boot? If so, how did you have them set up? I was thinking of doing a similar set up. TL auto shifter with a shift boot. if you have any pics that would be great. What set up are you doing next?
Also, why did you switch from the p2r 4 inch intake to a smaller one? did you feelor record gains from switching to the smaller one?
#6
Hey wheeelman how are you?
just wondering about two things,
did you use the shift knob with the shift boot? If so, how did you have them set up? I was thinking of doing a similar set up. TL auto shifter with a shift boot. if you have any pics that would be great. What set up are you doing next?
Also, why did you switch from the p2r 4 inch intake to a smaller one? did you feelor record gains from switching to the smaller one?
just wondering about two things,
did you use the shift knob with the shift boot? If so, how did you have them set up? I was thinking of doing a similar set up. TL auto shifter with a shift boot. if you have any pics that would be great. What set up are you doing next?
Also, why did you switch from the p2r 4 inch intake to a smaller one? did you feelor record gains from switching to the smaller one?
This is from my Accord. I used a RAZO knob with this boot.
The 5 speed shifter Pics are over on V-6-P .
I still have the P2R 4 inch SRI. I only switched Filters.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SidhuSaaB
3G TL Problems & Fixes
18
05-30-2020 12:40 AM
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
Hines57
Car Parts for Sale
0
09-24-2015 01:58 PM