Okay guys I got rid of my CL and I have a couple of parts, nothing special that I don't want laying around my garage.

-Exhaust manifold & downpipe = $20 + shipping
-O2 sensor bung for end of downpipe= $5 + shipping
-Carpet mats (decent condition) $20 +shipping
- Stock air intake w/ filter.
-Apexi N1 muffler $75 + shipping
-Magnaflow muffler $25 + shipping
- custom 25" Resonator $20 + shipping

I also have two sets of rims, 98 3.0 rims (painted bronze) WITH TIRES $175 + shipping

And stock 97 CL rims (unpainted) w/o tires. 150+shipping


MAKE ME OFFERS GUYS!!

I'll get pics later. Thanks for looking. Bump if you view please!

 

Okay i'm gonna go close them now Ron. Thanks

I would also like to add to the list above that I have an original 1st gen CL spoiler for sale (brake light intact!) $100+ shipping.

Also

generic intercooler $50 +shipping
small turbo $50 + shipping

 

bump for pics of exhausts

 

might want that resonator and pics

 

Too dark tonight to take pics, will get on that tomorrow at some point.. I do have pics of magnaflow muffler, it has surface rust, hence the low price. But there is nothing wrong with it.

 

Bronze stock wheels for sale:

 

I also have the stock springs for the car if anyone wants to go back to a stock ride height!

$50 OBO+ shipping for all 4 shocks!!

 

how much do think shipping would be for the bronze wheels? to 91335, thanks nate

 

Let me find a box for a single rim w/ tire, I will go have it weighed at UPS store and estimated shipping, then i'll multiply it by 4.

I"ll let you know within the week

When I bought the wheels off of ethenol, he wanted 300 for the rims with tires+ shipping and i ended up paying $500 total, so think of the deal you are getting from me if this works out

 

ok, thanks dude!

 

pricing for shipping on those wheels? what's the tires on those?

 

the front two tires are brand new on them, they are General UHP (ultra high performance) General is the brand BTW. They got really good ratings on tirerack.com. and the rears are Uniroyal Touring Track, nothing special. They still have a good amount of tread left on them.

I'm still working on getting a price for ya! sit tight

 

did you install the resonator, if so how was the sound(louder,quieter)?


thanks.

 

hmmm.

 

The resonator came with my full custom2.25" exhaust, I later upgraded to a thrush glasspack resonator which was bigger.

 

bump for pics of the apexi muffler

 

Questions on the Magnaflow,
What is the size of the inlet?
Is there a noticeable difference in sound vs stock muffler?
Thanks bro.

 

Also, could I get more info on the Apexi muffler with some pics aswell?

Got dibs on the mufflers btw...

 

Bizump.

Where are you Natester??

 

Sorry, i'm here. I will do picture tomorrow, promise.

Feel free to text me to remind me to take pics, anytime after 2PM EST

978-790-0064

Just make sure you let me know who you are.


Sorry ninja, no dibs, only whoever pays first!



Muffler info:

The apexi is LOUD as hell. I will find the link of the video of it soon for you. There is also a video of it on cocoas car somewhere on youtube, if you search, they are atop a parking garage.

As for the magnaflow, i don't really remember, its been like 3 years since I had it on my car.
It sounded fine with the stock piping, but with custom free flow piping it was very farty.

 

You're moving on to better things *cough Mazda 3 cough* and leaving us AZiners behind, I get it....
Haha jk bro, glad you responded though. I was about to resort to PMing..

But yeah, def take those pics. Also need inlet size info. I know you had custom exhaust but I forgot the size piping you used. If I remember correctly you used the same size as a stock 3.0.

btw, that Chris' car vid, is that the vid where that one dude was like, "UGHhhhh! No power steering!"

 

http://s29.photobucket.com/albums/c2...t=Movie19.flv][IMG]http://vid29.photobucket.com/albums/c292/gnate/cars/th_Movie19.jpg?videoplayer=offsite?videoplayer=off site

 

What is the name or number of the Magnaflow muffler? What is the inlet size for the Magnaflow and A'pexi N1?

 

Someone should just buy this car as a whole for parts. $1500, everything works, you pay for shipping. aha

 

Car did not sell at auction today so there is a possibility of me parting out the entire vehicle.

 

Okay guys, I have the car listed for sale now again. But the thinsg mentioned above will still be for sale. I'm gonna go snap pics of the apexi and carpet stuff.

 

Apexi
Apexi price is now $40 + shipping, since that's what I paid cocoa, even though he didn't ask for it.






Resonator


Floor Mats, picturs are rear and drivers side, passenger side is still in car, in same condition.

Please keep in mind they are not vaccuumed or cleaned, I can do that if you like i'm sure they'd look much better.

 

So yeah, what's the inlet size and Magnaflow muffler model?

 

I don't have the damn thing with me, its in my friends bedroom! haha and southjerseyCL is paying me already...

 

Just found a buyer for the bronze stock 3.0 Wheels!

sorry switchfoot

 

it's all good gnate! i'm looking at some old school rims! or just some tires for my rims!

 

Parting out entire 1st Gen CL, I just need suspension components left on it so it can be picked up and brought to the junkyard

 

Parts I can think of for sale:
-ST sway bars: $200
-Ingalls Camber kit (front and rear) $300 OBO (THIS IS BRAND NEW, it was installed on my car about 2 days before I took it off the road. GREAT for anyone who wants to slam. I paid over $400 for these things and they really are in excellent condition.
-Rear view mirrors. (I kind of want to ship one to asianspec just so he can have two black ones $15/per mirror +shipping
-30% Tinted windows on passenger and driver side door. $40/pane + shipping
-CL-s Shift knob $20 shipped
-Cup holder $5 + shipping
OEM stereo receiver - $75 + shipping OBO
Alpine IDA stereo receiver (has ipod hookup and everything) $100+shipping
Glove box, $20 + shipping
Center console $50 + shipping
Stock springs - $40 + shipping for all 4
Stock exhaust manifold and down pipe $40 +shipping
Smoked corners $10 + shipping
Spare tire + Tools $50 + shipping

 

I will update the list as I think of things, or you people give me ideas and I will give you a price.

 

I'll take that cupholder man. You interior color is classy gray right?

 

no its black

 

Ahh, well that's fine. How much do you think shipping will be?

btw, I'm surprised you're not selling the grill.

and lol @ asianspec mirror reference.

 

i'll take the shift knob, and i'll get back to u on the camber kit i haven't decided yet

 

...and passenger side sun visor if i can

 

dont have window sun visors.