TylerT's FULL part out [Comptech, UR, Volk, P2R, Fujita, ATLP]
Thread Starter
Joined: Jul 2007
Posts: 6,957
Likes: 3,249
From: San Diego
TylerT's FULL part out [Comptech, UR, Volk, P2R, Fujita, ATLP]
Alright guys, I am doing a FULL part out on my car. I just hit 100,000 miles and in my opinion .. the fun is over. Time to look for another car. My loss is your gain.
Custom J-pipe - $225 shipped $245 shipped- bought this off a fellow member on the forum. It was a design prototype .. no dings or scrapes and gives great gains. This is what it looked like before I put it on my car .. it's just a little discolored from the road. It comes with gaskets.

Comptech Catback Exhaust w/ Aero 21 Resontor - $600 Local $700 shipped - Perfect condition, no scrapes or dings on the mufflers and it comes with ALL hardware necessary.

ATLP Racepipe with Heatshield Perfect condition, nothing wrong with it. - $80 Local $90 shipped
P2R Spacer w/ gaskets - $60 Local $65 shipped
UR Underdrive Pulley w/ Belt - $75 + your stock sized pulley w/ belt. If you need somebody to remove it .. we can split the cost to remove it and put my stock pulley back on. Local only, I need your stock pulley / belt.
Fujita CAI - $80 + your stock intake OR $115 w/o stock intake $125 shipped
Volk GT-V 19x8.5 +46 - $625 + Stock 3G TL wheels. I just got 2 new front tires and the rears have about 30 - 35% tread left. The wheels only have a few curb marks on them. Local only, I need 3G stock wheels.
Tokico Blues + TEIN S-Tech - $200 + your stock suspension, it would be a straight swap. Local only.
(One of the studs snapped off where the tower bar connects, car still handles like a champ so in my opinion .. does not effect the performance. If it really bothers you that much you can just get another tophat and do a swap)
Stock TL Springs - 60,000 miles on them, I'll let them go for $20. Local only.
I work Monday - Saturday all of which are night shifts. I will take more pics, I am off to work.
Custom J-pipe - $225 shipped $245 shipped- bought this off a fellow member on the forum. It was a design prototype .. no dings or scrapes and gives great gains. This is what it looked like before I put it on my car .. it's just a little discolored from the road. It comes with gaskets.

Comptech Catback Exhaust w/ Aero 21 Resontor - $600 Local $700 shipped - Perfect condition, no scrapes or dings on the mufflers and it comes with ALL hardware necessary.

ATLP Racepipe with Heatshield Perfect condition, nothing wrong with it. - $80 Local $90 shipped
P2R Spacer w/ gaskets - $60 Local $65 shipped
UR Underdrive Pulley w/ Belt - $75 + your stock sized pulley w/ belt. If you need somebody to remove it .. we can split the cost to remove it and put my stock pulley back on. Local only, I need your stock pulley / belt.
Fujita CAI - $80 + your stock intake OR $115 w/o stock intake $125 shipped
Volk GT-V 19x8.5 +46 - $625 + Stock 3G TL wheels. I just got 2 new front tires and the rears have about 30 - 35% tread left. The wheels only have a few curb marks on them. Local only, I need 3G stock wheels.
Tokico Blues + TEIN S-Tech - $200 + your stock suspension, it would be a straight swap. Local only.
(One of the studs snapped off where the tower bar connects, car still handles like a champ so in my opinion .. does not effect the performance. If it really bothers you that much you can just get another tophat and do a swap)
Stock TL Springs - 60,000 miles on them, I'll let them go for $20. Local only.
I work Monday - Saturday all of which are night shifts. I will take more pics, I am off to work.
I take the P2R spacer. Please PM me your PayPal address, or e-mail me at " JDM2288@yahoo.com "
Trending Topics
Tyler, hit me up about your suspension. bradleefor3@gmail.com
I live in Austin, TX but I know that we can work something out.
I live in Austin, TX but I know that we can work something out.
KICKED IN THE BALLS
iTrader: (1)
Joined: Aug 2008
Posts: 1,225
Likes: 0
From: San Diego, CA/Pittsburgh,PA
Thread Starter
Joined: Jul 2007
Posts: 6,957
Likes: 3,249
From: San Diego
Alright, update:
CAI - Sold
Spacer - Sold
Racepipe - Sold
Pulley - Pending
Suspension - Pending
Comptech Exhaust - Pending
J-pipe - Still available
Rims - Still available
CAI - Sold
Spacer - Sold
Racepipe - Sold
Pulley - Pending
Suspension - Pending
Comptech Exhaust - Pending
J-pipe - Still available
Rims - Still available
Thread Starter
Joined: Jul 2007
Posts: 6,957
Likes: 3,249
From: San Diego
^ Yeah, it really is time for a new car
.
I'm currently looking at Honda Accord 6 speed coupes .. Sonnick / 04accordcoupe really got me wanting an Accord the past year lol.
I found a couple with moderate mileage and man .. too good to pass up.
.I'm currently looking at Honda Accord 6 speed coupes .. Sonnick / 04accordcoupe really got me wanting an Accord the past year lol.
I found a couple with moderate mileage and man .. too good to pass up.
Thread Starter
Joined: Jul 2007
Posts: 6,957
Likes: 3,249
From: San Diego
Nope, keeping all the OEM parts on the car.
I couldn't afford an 09 Coupe
, almost breaking even on my TL after I sell it.
Definitely getting the V6 6MT in the previous generation.
, almost breaking even on my TL after I sell it.Definitely getting the V6 6MT in the previous generation.
Tyler, if you'r einterested in shipping the Volks, let me know. some pictures would be nice too if possible. If NEEDED, I have A-Specs.
or, you could charge a tad bit more for the wheels, since i don' thave stockies...
or, you could charge a tad bit more for the wheels, since i don' thave stockies...
Chapter Leader (San Antonio)
iTrader: (3)
Joined: Oct 2008
Posts: 6,022
Likes: 437
From: Houston, Texas
Go get the new 2010 TSX V6, looks so much better than the TL and is faster than the V6 Accords and 3G TL
Thread Starter
Joined: Jul 2007
Posts: 6,957
Likes: 3,249
From: San Diego
, I need wheels for my car to ride on! haha.
KICKED IN THE BALLS
iTrader: (1)
Joined: Aug 2008
Posts: 1,225
Likes: 0
From: San Diego, CA/Pittsburgh,PA





