does any one know avid av06 wheels will fit over the brembo calibers I was looking at 18x8.5 with a 35 offset but I can also get 18x9.5 with a 38 offset. If they don’t fit what size spacers would I have to get to make them clear.

 

They don't you need a 15mm spacer

 

holy hell I called A-spec wheels out of Cali and they said it would take an 8mm with the 35 offset

 

You can't do 8mm spacers you have to get 15mm spacer adapter in size 5x114.3 64.1 center bore.
To install a 8mm spacer you have to remove the wheel hub and install extended studs to the hub and use open end lug nuts.
15mm is easy a straight bolt on and cheap.

 

do you know of any good places to get them for a decent price.

 

https://frsport.com/V2-Hubcentric-Wh...iABEgLsNfD_BwE I was looking at these

 

I used to have 18x9.5 +38 on my 05 manual (has brembos). I ran a 20mm front and 25mm rear. If I remember correctly, they had some room with the 20mm in the front so you can get by with a 15mm. But I am not sure if the studs will fit into the pockets with the 15mm like they did with the 20mm.

 

Nice!
The polish version looks great

Those are good get them
that's a good brand for Spacers