Went through an aftermarket journey with my stereo. Im here to help if anyone has any question for base and tech package stereo.

 

Dejan, why not POST your journey so ALL can see...instead of asking a question, to ask you a question...

it would just be a lot easier if you showed us your install, then...if we have any questions, ask you...

 

Great Suggestion. Will do.

 

 

why does Acura sucks so much ?

 

 

Acura's are great cars I've had 3. First one (2002 Acura CL) heavily modified (still ran over 200K miles) and the second (2009 Acura TL) untouched and now the third 2017 Acura TLX (stereo only). They are built well, they are built to last. Do you have any stereo questions?

 

hi,

1) Where is a good place to ground Amp? At rear seat bolt or rear left near break light? The rear seat, it's hard to scrape paint off cuz a metal was in a way and can only move a little ( see picture in red)

2) I like to replace one of the ground oem harness wire (post amp harness). Do you know what kind of harness terminal removal tool I needed? Please link if you know,
Will this work,
Thanks

 

I ran 0 gauge from battery to firewall. Then I put a 150amp and 250 amp fuse splint into 2 4 gauge wires powering both amps. I grounded the amps using 4 gauge wire behind left rear seat. There is a bolt behind the seat on the drivers side that is metal on metal. You may have to remove the rear panel behind the seatbelt that is a perfect ground. Dont have to peel paint and its solid metal. Fold the rear seat down, remove the padded back rest behind the seat belt. And you'll see it.

 

Thanks. Will check it out


Also, you know any terminal removal tool that can remove pin wire from post amp harness?