Numairh's 3G TL Build Thread
#521
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
LOVE those rolling shots!
#529
UA6MT
Thread Starter
iTrader: (2)
Couple small updates... I put my XLR8 mufflers back on and BOY does it sound so good. So much better than straight piped with a resonator. So currently my setup is an RV6 Jpipe, XLR8 catback with a single dynomax 24215. It sounds amazing. It also looks good with the rear bumper cutout not looking so empty anymore. I repainted my brakes a nice colorshift color as well.
Painting these brakes in 110 degree weather is no fun..
Colorshift... blue and purple mainly but the occasional teal/green in some lighting.
Washed before the shade went away
Colorshift... blue and purple mainly but the occasional teal/green in some lighting.
Washed before the shade went away
#532
Burning Brakes
OMG....the sound....so sexy!
Ninja edit: What were the specs on those wheels? It looks like a perfect fitment. I'm trying to figure out the best specs to go with.
Ninja edit: What were the specs on those wheels? It looks like a perfect fitment. I'm trying to figure out the best specs to go with.
Last edited by Shadow2056; 09-03-2017 at 12:29 PM.
#533
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Very hot!
The following users liked this post:
numairh (09-14-2017)
The following users liked this post:
numairh (09-14-2017)
The following users liked this post:
numairh (09-14-2017)
#539
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Damn, look at those awesome seats.
The following users liked this post:
numairh (09-14-2017)
#542
UA6MT
Thread Starter
iTrader: (2)
People ask me the same thing.. I think that when something, or someone is important to you, you will make time for it. Being a full time student, and working close to full time, it is hard but never an excuse!
#543
UA6MT
Thread Starter
iTrader: (2)
Quick update, removed the collars out of my front coilovers in between classes today. I've done the suspension on TLs so many times, it took me about 40 min start to finish to remove the coils, tophats, and reassemble. Rear collars have been removed already. Current height is 23.2"/23.3" fender to ground all around.
#545
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Covers!
I agree completely...one of my pet peeves is when people say "I don't have time for that".
No, you don't MAKE time for it.
Also, I think the lowest I was was 23.75" Maybe 23.5...I must be getting old though cause slammed looks so low to me now.
I agree completely...one of my pet peeves is when people say "I don't have time for that".
No, you don't MAKE time for it.
Also, I think the lowest I was was 23.75" Maybe 23.5...I must be getting old though cause slammed looks so low to me now.
#547
Instructor
Quick update, removed the collars out of my front coilovers in between classes today. I've done the suspension on TLs so many times, it took me about 40 min start to finish to remove the coils, tophats, and reassemble. Rear collars have been removed already. Current height is 23.2"/23.3" fender to ground all around.
The following users liked this post:
numairh (09-21-2017)
#548
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Looks great, as always.
The following users liked this post:
numairh (09-21-2017)
#550
UA6MT
Thread Starter
iTrader: (2)
Put some sidesplitters in my car again. Also went out to Alameda, CA for SpocomSF 2017 with the new crew! Got recruited into CleanCulture NorCal. Nothing is funnier than people asking what bags yo are on and they walk past 😂
#551
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
#554
UA6MT
Thread Starter
iTrader: (2)
I did something. I don’t know why, but I did it. I probably should’ve just used plastidip lol. Oh well. Thoughts on wheel color and other suggestions? I may do bronze next.
#556
UA6MT
Thread Starter
iTrader: (2)
The excitement of white wheels lasted about 4 hours until I realaizrd how stupid I was for painting them... went online and found these for sale local with tires for a really low price and had to snag em!
#560
Burning Brakes
Yes!! New wheels look great too! I had some 04 TL wheels on my TSX that I painted white before. As long as there was a clear coat, they cleaned up pretty good. But it took a lot to keep them clean tho. Lol. The specs on the new wheels the same as the others?