Aspec Kit and 19's
#1
Aspec Kit and 19's
Added the kit and some new wheels to my car. Glad I no longer have a naked Aspec, I must say, the "carbon fiber" inserts look a lot better than I expected. Most of the kits I see are dull and grey-ish in color. I just added a bit a plastic conditioner and it really made the weave pattern "pop".
I also re-did the black vinyl wrap on my Grille and Window trim. The original job was done about a year ago and it started peeling.
Anyway, here's a few pics.
I also re-did the black vinyl wrap on my Grille and Window trim. The original job was done about a year ago and it started peeling.
Anyway, here's a few pics.
The following 2 users liked this post by iRaw:
rockstar143 (09-20-2016),
Undying Dreams (09-21-2016)
The following users liked this post:
TacoBello (09-21-2016)
Trending Topics
#9
The following 3 users liked this post by iRaw:
The following users liked this post:
justnspace (09-20-2016)
The following users liked this post:
justnspace (09-20-2016)
The following users liked this post:
justnspace (09-20-2016)
The following users liked this post:
Undying Dreams (09-21-2016)
#16
Making assumptions makes an ass out of you too my friend. I specifically asked if they were VORDOVAN because I know people who deal with them and OP could probably get a hook up with some nice looking center caps but fuck it I guess. And frankly you're the one who sounds like a snob right now. Go back to crying about the noisy suspension you dont fix.
Last edited by usdmJON; 09-20-2016 at 04:11 PM.
#17
Judging by the center caps and OPs reaction I doubt it.
I like the kit a lot OP. Really makes the aspecs stand out. Have you considered going lower yet? You may lose some of the "flush" stance if you go lower but a little bit of spacers would make it look on point again. Also showing all the haters 19s can look great. I want to rebuild my Works to 19 someday :,\
I like the kit a lot OP. Really makes the aspecs stand out. Have you considered going lower yet? You may lose some of the "flush" stance if you go lower but a little bit of spacers would make it look on point again. Also showing all the haters 19s can look great. I want to rebuild my Works to 19 someday :,\
#19
Actually, my wheels stick out pass the fender a tad bit. Once it's lowered, and maybe get some negative camber, it should tuck in nicely. No spacers needed.
I'll play around with it, we'll see how it goes.
The following users liked this post:
Undying Dreams (09-21-2016)
#24
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,033
I think you're high enough that you'll camber in enough to either need spacers or upper camber adjust to bring them back to flush.
Jon...he didn't mention you! He said wheel snobs!
Dafuq does Jon have to do with wheel snobs?
Jon...he didn't mention you! He said wheel snobs!
Dafuq does Jon have to do with wheel snobs?
#25
ILXdyna and I have already traded words before so them calling me a snob is anything but a simple joke.
Dyna. You fix your suspension yet?
#26
Making assumptions makes an ass out of you too my friend. I specifically asked if they were VORDOVAN because I know people who deal with them and OP could probably get a hook up with some nice looking center caps but fuck it I guess. And frankly you're the one who sounds like a snob right now. Go back to crying about the noisy suspension you dont fix.
You're the one crying... but okay
#28
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,033
iRaw was pretty hilarious though, no? We can at least all agree on that?!?!
For a second I was like, did this ninja buy the car with these wheels and he thinks it really is Akra? Nawwww...
bam, he's being funny.
For a second I was like, did this ninja buy the car with these wheels and he thinks it really is Akra? Nawwww...
bam, he's being funny.
The following users liked this post:
justnspace (09-21-2016)
#29
he fuckin' fooled me. I LOL'd at myself, something jon needs to learn.
#30
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,033
Jon knows it...he just doesn't like to show weakness and humility on public forums!
He badddd!!!
I did the same Justin...
but you were so gracious in admitting it first, I pretended I knew it was him being funny from the start.
He badddd!!!
I did the same Justin...
but you were so gracious in admitting it first, I pretended I knew it was him being funny from the start.
#33
The following users liked this post:
justnspace (09-21-2016)
The following users liked this post:
justnspace (09-21-2016)